Hotpoint HME40N manual Troubleshooting, Malfunctions Possible causes / Solutions

Page 14

GB

Troubleshooting

If the appliance does not work, before calling for Assistance (see Assistance), check for a solution from the following list.

Malfunctions:

Possible causes / Solutions:

The display is completely switched off.

The motor does not start.

The display is on but it is dim.

a)The alarms goes off and the lamp in the refrigerator compartment flashes.

b)The alarm goes off and a message appears on the scrolling text of the display.

c)The alarm goes off and a message appears on the scrolling text of the display.

The refrigerator and the freezer do not cool well.

The plug has not been inserted into the electrical socket, or not far enough to make contact, or there is no power in the house.

The appliance comes with a motor protection control (see Start-up and use).

Pull out and reverse the plug before putting it back in the socket.

a)The refrigerator door has remained open for more than two minutes The buzzer stops when the door is closed or by pressing the RESET ALARM button. or the correct switching-off procedure was not followed (see Maintenance).

b)The temperature of the freezer is too high.

The freezer will maintain a temperature of around 0°C so that the food will not refreeze, allowing you to eat it within 24 hours or to freeze it again after cooking them.

c)The temperature of the freezer has reached a dangerous level. the food must not be eaten. The freezer will reach a temperature of -18°C.

To switch off the buzzer, press the RESET ALARM button. Press again to delete the message on the display and to restore normal operation.

The doors do not close properly or the seals are damaged.

The doors are opened too frequently.

The temperature that has been set is too high (see Start-up and use).

The refrigerator or the freezer have been over-filled.

The food inside the refrigerator is beginning to freeze.

The motor runs continuously.

The appliance makes a lot of noise.

Early ending of functions

The temperature that has been set is too low (see Start-up and use).

The SUPER COOL and/or SUPER FREEZE and/or ICE PARTY functions are active.

The door is not closed properly or is continuously opened.

The outside ambient temperature is very high.

The appliance has not been installed on a level surface (see Installation).

The appliance has been installed between cabinets that vibrate and make noise.

The internal refrigerant makes a slight noise even when the compressor is off. This is not a defect, it is normal.

Electrical disturbance on the network or brief interruptions of the power supply

14

Image 14
Contents Instructions for Installation and Use Retention of this Instruction Book Operating Instructions REFRIGERATOR/FREEZER CombinationPositioning InstallationPositioning and connection LevellingFitting a new plug ON/OFF button Description of the applianceControl panel Fruit Overall viewLamp FreezerBottle RACK/ can RACK* flap door AccessoriesRefrigerator compartment Freezer compartment Display Display descriptionUsing the display Setting the temperatureStart-up and use Using the refrigerator to its full potentialUsing the freezer to its full potential Starting the applianceMaintenance and care Disposal Precautions and tipsGeneral safety Respecting and conserving the environmentTroubleshooting Malfunctions Possible causes / SolutionsModel AssistanceCommunicating Page Page After Sales Service Guarantee Key Contacts

HME40N specifications

The Hotpoint HME40N is an innovative and efficient home appliance that stands out in the realm of modern cooking technologies. Designed with user convenience in mind, this built-in microwave oven has garnered attention for its impressive features and performance.

One of the standout characteristics of the HME40N is its extensive range of cooking options, making it a versatile addition to any kitchen. It offers multiple power levels, ensuring that users can easily adjust cooking intensity according to various dishes. With its generous 40-litre capacity, the microwave is capable of accommodating larger meals, perfect for families or those who love to entertain.

A key technology integrated into the Hotpoint HME40N is its innovative inverter technology. Unlike traditional microwaves that use a simple on/off method, inverter technology provides a continuous stream of power at a predefined setting. This allows for more uniform cooking and reheating results, eliminating the issues of overcooked edges and cold centers that can often plague conventional microwaving. It ensures precision cooking, delivering consistent heat that preserves the moisture and texture of your food.

Another significant feature of the Hotpoint HME40N is its defrost setting. This function allows for faster and more even defrosting of frozen foods, making meal preparation more efficient. Additionally, the appliance comes equipped with pre-set cooking programs that simplify meal preparation. Users can select specific programs for popular dishes such as pizzas, popcorn, and baked potatoes with just the push of a button, ensuring optimal results without guesswork in timing or power levels.

The microwave also boasts a sleek and modern design, complete with a stainless-steel finish that complements various kitchen styles. Its user-friendly control panel features easy-to-read icons and symbols, making it accessible for all users, from cooking novices to seasoned chefs.

In terms of safety features, the Hotpoint HME40N includes a child lock function, preventing accidental operation and ensuring peace of mind in households with young children. Coupled with its energy efficiency, this model stands as a responsible choice for environmentally-conscious consumers.

In summary, the Hotpoint HME40N is a robust and multifaceted built-in microwave offering advanced cooking technologies and user-centric features. Whether you are reheating leftovers or preparing a family meal, this appliance provides convenience, efficiency, and style to enhance any culinary experience.