Hotpoint FFQ48 manual Using the display, Setting the temperature

Page 10

GB

Using the display

setting the temperature

When the appliance is switched on, the standard storage temperatures are automatically set:

+5°C for the refrigerator compartment

-18°C for the freezer compartment.

The temperatures that may be set are the following:

between +2°C and +8°C for the refrigerator compartment

between -18°C and -26°C for the freezer compartment

To set the temperature:

1.Press the MODE button until the value flashes on the refrigerator compartment or freezer compartment display.

2.To increase the temperature, press the ADJUST/ SELECT+ button.

To decrease the temperature, press the ADJUST/SELECT- button.

Each time the button is pressed, the value increases by 1°C.

3.Confirm the choice by pressing the MODE button within ten seconds: the value will stop flashing: If the choice is not confirmed, the temperature that had been set before the operation will appear on the display.

!The ECO function reduces the possible adjustments: from +4°C to +6°C for the refrigerator and from -18°C to -20°C for the freezer.

Function status

function activated (green symbol with blue inside on)

function selected (green symbol with red border on)

function deactivated (green symbol only on)

Activating and deactivating the SUPER COOL, ECO, SUPER FREEZE, ICE PARTY functions.

1.Press the MODE button until the desired function is selected.

2.To activate, press the ADJUST/SELECT + button. To deactivate, press the ADJUST/SELECT - button.

3.Confirm the choice by pressing the MODE button within ten seconds. If the choice is not confirmed, the function that had been set before the operation will appear on the display.

Once the operation is over, the red border goes off.

If the function was activated: green symbol with blue inside

on. If the function was deactivated: green symbol only on.

Activating and deactivating the AQUA CARE function

1.Press the Aqua Care button. A message on the display shows the current status of the function.

2.Press the Aqua Care button again to activate or deactivate the function.

Water dispensing

1.Activate the Aqua Care function

2.Place the container that needs to be filled under the outer dispenser.

3.Press the dispenser

4.Interrupt the flow by moving the container away from the dispenser

!The Aqua Care function comes with a safety timer that interrupts the supply if operation is continuos for more than 5 minutes. To restore operation it is necessary to press the RESET ALARM button twice.

Setting the date and time

The settings are in series and it is not possible to adjust the date if the time has not been set before:

1.Press the MODE button repeatedly until the SET TIME [+/-] appears on the scrolling text display.

2.To scroll forward one hour press the ADJUST/SELECT+ button. To scroll back one hour press the ADJUST/SELECT- button.

3.Confirm the choice by pressing the MODE button within ten seconds. If the choice is not confirmed, the time that had been set before the operation will appear on the display.

Once the hours have been set, the minutes, days, months and years can be set by following steps 1-3.

Σεττινγ τηε λανγυαγε

1.Press the MODE button repeatedly until the language setting screen appears on the scrolling text display.

2.To scroll forward, press the ADJUST/SELECT + button. To scroll back, press the ADJUST/SELECT - button.

3.Confirm the choice by pressing the MODE button within ten seconds. If the choice is not confirmed, the language that had been set before the operation will appear on the display.

!The first time that the appliance is switched on, the language setting request screen appears automatically on the display: follow the described procedure.

Σωιτχη οφφ τηε σουνδ ανδ ϖισυαλ αλαρ∝σ

Press the RESET ALARM button: by pressing it once, the sound alarms are switched off; by pressing it a second time, the alarm messages are deleted from the scrolling text on the display.

!The open door alarm is stopped by closing it (see Troubleshooting).

!If DEMO MODE appears on the display, the appliance is in exhibition mode, that is, it does not cool despite the fact that the display and the internal lamp are on. To exit this mode, press the MODE, ADJUST/SELECT+ and ADJUST/ SELECT- buttons simultaneously for at least three seconds.

10

Image 10
Contents Instructions for Installation and Use Retention of this Instruction Book Operating Instructions REFRIGERATOR/FREEZER CombinationPositioning InstallationPositioning and connection LevellingDisposing of the plug Starting Aqua CareDescription of the appliance Mode buttonControl panel Overall view Accessories Refrigerator compartment Freezer compartmentDisplay Alarm indicator light Scrolling textDisplay description Using the display Setting the temperatureStart-up and use Using the refrigerator to its full potentialUsing the freezer to its full potential Starting the applianceMaintenance and care Disposal Precautions and tipsGeneral safety Respecting and conserving the environmentTroubleshooting Malfunctions Possible causes / SolutionsCommunicating AssistanceModel Page Page After Sales Service Guarantee Key Contacts

FFQ48 specifications

The Hotpoint FFQ48 is a modern refrigerator freezer that embodies innovation, efficiency, and style. Designed to cater to the needs of contemporary households, this appliance features a sleek exterior combined with functionality that makes food storage and preservation both practical and convenient.

One of the standout features of the Hotpoint FFQ48 is its **Frost Free technology**. This system prevents ice build-up in both the refrigerator and freezer sections, ensuring that users never have to manually defrost their appliance. This not only saves time but also optimizes storage space by keeping the interior free from frost.

With a total capacity that can accommodate up to 250 liters, the FFQ48 offers ample space for food items. The refrigerator section typically comes with adjustable shelves that allow for flexible organization, making it easy to store large items or adjust the layout to fit your grocery needs. The multi-air flow system guarantees consistent temperatures throughout the fridge, promoting efficient cooling and prolonging the freshness of perishable items.

Another innovative feature is the **Energy Efficiency Rating**. The Hotpoint FFQ48 is designed with energy savings in mind, often boasting an A+ rating. This translates into lower energy consumption, resulting in both environmental benefits and savings on utility bills.

In addition to its cooling technologies, the refrigerator is equipped with **dedicated storage solutions**. It may include special compartments for fruits and vegetables, which help maintain optimal humidity levels, as well as door racks designed for easy access to frequently used condiments and drinks. Furthermore, the freezer compartment is spacious enough to accommodate frozen foods, with clear drawers that allow you to see contents at a glance.

The Hotpoint FFQ48 is not only functional but also stylish. Its modern finish and design make it an attractive addition to any kitchen, blending seamlessly with other appliances and cabinetry. Moreover, it features a user-friendly interface, making temperature adjustments and settings straightforward and accessible.

In summary, the Hotpoint FFQ48 combines advanced technology with practical features, providing a reliable and efficient cooling solution for modern households. Whether it's the frost-free operation, energy efficiency, or smart storage options, this refrigerator freezer stands out in its class, making it a valuable investment for any kitchen.