Hotpoint FF7190TX manual Start-up and use, Starting the appliance, Navigating the display

Page 7

Start-up and use

Starting the appliance

!After transportation of the appliance, carefully place it in an upright position and wait at least 3 hours before connecting it to the electricity mains, to make sure it operates as it should.

• Clean the inside of the refrigerator well using warm water and bicarbonate of soda before placing food inside it.

• The appliance comes with a motor protection control system which makes the compressor start approximately 8 minutes after being switched on. The compressor also starts each time the power supply is cut off whether voluntarily or involuntarily (blackout).

Freezer Compartment

When the product is switched on (the ON/OFF button is pressed for more than two seconds) the freezer compartment is set to its default value of -18°C. We recommend that the SUPER FREEZE function is set (the freezer display shows the text “SF”) in order to accelerate the cooling process of the compartment; when the inside of the compartment has reached its optimal temperature the function will be deactivated and the food may be placed inside.

Refrigerator Compartment

When the appliance is switched on the refrigerator compartment is set to its default value of +5°C. We recommend that the SUPER COOL function is set (the refrigerator display shows the text “SC”) in order to accelerate the cooling process of the compartment. After a few hours it will be cool enough for food to be placed inside.

Navigating the display

Setting the temperatures:

If the product is switched on, the refrigerator and freezer displays will indicate the temperatures set at that moment. To change them, simply press the + and - buttons corresponding to the compartment for which you wish to change the set temperature. To be specific, each time one of the buttons is pressed the temperature is increased or decreased by 1°, and the number of illuminated horizontal bars is adjusted accordingly. The temperature values that may be selected for the refrigerator compartment are +8°C, +7°C, +6°C, +5°C, +4°C, +3°C and +2°C, while the values that may be set for the freezer are -18°C, -19°C, - 120°C, -21°C, -22°C, -24°C and -26°C.

The temperatures are automatically set to +5°C for the refrigerator compartment and -18°Cfor the freezer compartment (these are standard food storage values). When the “I Care” function is active, the appliance

automatically adjusts the temperatures according to the conditions inside and outside the refrigerator; the operation GB of this function is signalled by the text “AUTO”.

Whenever it is necessary to activate the “I Care” function at temperatures that are different to the standard storage values, the “I Care” button must be pressed as soon as the function is activated and held down while the new temperatures are set using the + and - buttons. Under these conditions, the temperatures may be set to 4°C, 5°C and 6°C for the refrigerator compartment and -18°C, -19°C and -20°C for the freezer compartment.

When the HOLIDAY function is active the temperature may not be adjusted, however the appliance adjusts itself automatically so that the optimal settings for the situation are used: +12°C for the refrigerator compartment and - 18°C for the freezer compartment. This function is indicated by the text.

To activate and deactivate the functions simply press the relevant button and the function status will be signalled by the corresponding LED switching on or off.

Several functions (SUPER COOL, SUPER FREEZE, ICE PARTY, I CARE) are incompatible with others (HOLIDAY,...); remember that there is a pre-set order of priority which will help you to use the product in the best possible way.

When the Ice Party function has finished, press the ICE PARTY button to stop the relevant LED from flashing. This flashing indicates that the function is complete and that the bottle should be removed from the freezer compartment.

Child Lock

To enable the Child Lock function, the ALARM button must be pressed for 2 seconds; the button lock activation is confirmed by a short beep and the text “LO” “CH” appears on the refrigerator and freezer displays. This text is then replaced by the refrigerator and freezer temperatures set prior to when the child lock function was enabled.

To deactivate the function, press the ALARM button or 2 seconds; deactivation will be confirmed by a short beep and the text “CH” “OF” will appear on the refrigerator and freezer displays for 1 second.

7

Page 6 Page 8
Image 7
Page 6 Page 8
Contents Operating Instructions Positioning and connection InstallationThis Appliance Must be Earthed Disposing of the plug Reversible doorsControl panel Description of the applianceStorage compartments Overall viewLamp Shelves Wine Rack Ever FreshRefrigerator compartment Freezer compartment AccessoriesICE Care tray Starting the appliance Start-up and useNavigating the display Ever GB Chiller systemFresh Ever Fresh containers Using Ever Fresh to its full potentialUsing the refrigerator to its full potential Vacuum storageUsing the freezer to its full potential Maintenance and care Respecting and conserving the environment Precautions and tipsGeneral safety DisposalMalfunctions Possible causes / Solutions Troubleshooting AssistanceGuarantee After Sales Service 195071968.00

FF7190TX specifications

The Hotpoint FF7190TX is a standout appliance in the realm of modern refrigeration, blending functionality, style, and cutting-edge technologies. This refrigerator is designed to meet the needs of today’s households, offering ample storage space alongside efficient performance.

One of the main features of the Hotpoint FF7190TX is its impressive capacity. With a total storage volume of around 320 liters, it provides plenty of room for groceries, beverages, and more, making it ideal for families and those who enjoy cooking. The fridge section typically boasts multiple shelves, a salad crisper drawer, and door bins, allowing for organized storage of various items. The freezer compartment usually has a generous capacity as well, making it convenient for freezing bulk items.

The appliance incorporates advanced cooling technologies, including Total No Frost. This technology prevents the build-up of ice in both the fridge and freezer compartments, which means that users do not need to worry about manual defrosting. By maintaining optimal humidity levels, it also helps preserve food freshness for longer periods. This feature not only saves time but also promotes better energy efficiency.

Energy efficiency is another hallmark trait of the Hotpoint FF7190TX. Designed with energy-saving features, it often comes with an A+ energy rating, translating to reduced power consumption and lower electricity bills. This eco-friendly approach appeals to environmentally conscious consumers.

The design of the Hotpoint FF7190TX is sleek and modern, featuring a stylish stainless steel finish that adds a touch of elegance to any kitchen. The appliance is often equipped with adjustable shelves, which can be customized according to the user's needs. Additionally, the LED interior lighting provides enhanced visibility, making it easy to locate food items even in low light.

User-friendly features such as electronic controls and temperature displays ensure that managing settings is straightforward. The appliance also typically includes additional features like fast freeze functionality, which quickly cools newly introduced items.

In summary, the Hotpoint FF7190TX is a versatile and efficient refrigerator that combines ample storage capacity with innovative cooling technologies. Its emphasis on energy efficiency, alongside its modern design and user-friendly features, makes it an appealing choice for modern kitchens. Whether storing weekly groceries or entertaining guests, the FF7190TX stands out as a reliable and stylish option for any household.
Top Page Image Contents