Troubleshooting

GB	If the appliance does not work, before calling for Assistance (see Assistance), check for a solution from the
	following list.
	Malfunctions:	Possible causes / Solutions:

The display is off.

The motor does not start.

The display is on but it is dim.

The alarm sounds and the lamp in the refrigerator compartment flashes.

The alarm sounds and a message appears on the scrolling text of the display.

The alarm icon flashes, the Ever Fresh icon switches off and a message appears on the display.

•The plug has not been inserted into the electrical socket, or not far enough to make contact, or there is no power in the house.

•The appliance is equipped with a motor protection control system (See Start-up and use).

•Pull the plug out and check it before putting it back in the socket.

•The refrigerator door has been open for more than two minutes.

The buzzer stops when the door is closed or when the RESET ALARM button is pressed. It could also be that the correct switching-off procedure was not followed (see Maintenance).

•The temperature of the freezer is too high.

The freezer will maintain a temperature of around 0°C so that the food will not refreeze, allowing you to eat it within 24 hours or to refreeze it after it has been cooked.

•The temperature of the freezer is dangerously high: the food inside must not be eaten. The freezer will return to a temperature of -18°C. To switch off the buzzer, press the RESET ALARM button. Press again to delete the message on the display and restore normal operation.

•The Ever Fresh safety lock has intervened during prolonged use of the vacuum pump. To restore normal operation, check the ever Fresh system and press the Reset Alarm button twice (see Display).

•Make sure that the tube at the back of the Ever Fresh shelf is connected to the base of the refrigerator unit correctly.

The refrigerator and the freezer do not cool well.

•The doors do not close properly or the seals are damaged.

•The doors have been opened too frequently.

•The set temperature is too high (see Start-up and use).

•The refrigerator or freezer has been over-filled.

The food inside the refrigerator is • The set temperature is too low (see Start-up and use). beginning to freeze.

The motor runs continuously. • The SUPER COOL and/or SUPER FREEZE and/or ICE PARTY functions have been activated.

•The door is not closed properly or has been open continuously.

•The ambient temperature outside the appliance is very high.

The appliance makes a lot of noise.

The functions end earlier than they should.

•The appliance has not been installed on a level surface (see Installation).

•The appliance has been installed between cabinets that vibrate and make noise.

•The internal refrigerant gas makes a slight noise even when the compressor is off. This is not a defect, it is normal.

•There is electrical network disturbance or the power supply has been interrupted briefly.

FFL49 specifications

The Hotpoint FFL49 is a versatile and efficient washing machine that caters to modern household needs. With its sleek design and user-friendly features, it has become a popular choice among families and busy professionals alike. This washer is known for its impressive load capacity, innovative technologies, and energy-saving functionalities, making laundry day less of a chore.

One of the standout features of the Hotpoint FFL49 is its generous capacity of 9 kg, allowing users to efficiently wash larger loads in a single cycle. This is particularly beneficial for families, as it reduces the need for multiple washes, saving both time and energy. Additionally, with a spin speed of up to 1400 rpm, it ensures that clothes come out drier, minimizing drying time.

The FFL49 incorporates Hotpoint’s advanced ActiveCare technology, designed to remove up to 100 stains at just 20°C. This allows users to wash lower temperature, which not only saves energy but also helps to preserve the fabric quality of garments. With this technology, stains are treated effectively without the need for high-temperature washes.

Another notable feature is the Smart Technology integration, which enables users to download additional cycles and updates directly to the machine. This ensures that the washing machine remains current with the latest washing requirements and fabric types, enhancing its versatility. The machine also boasts an Eco Wash setting, providing users with the ability to perform efficient washes that consume less water and energy, aligning with sustainability goals.

The intuitive control panel makes operation simple, with an easy-to-read digital display that indicates the wash cycle progress. Additionally, the delay timer function allows users to set the machine to start at a more convenient time, optimizing energy usage and convenience.

Moreover, the Hotpoint FFL49 is designed with noise reduction technology, ensuring quiet operation. This is particularly advantageous for households where laundry might be done during nighttime or early mornings.

In summary, the Hotpoint FFL49 combines efficiency, technology, and ease of use, making it a reliable choice for modern households. Its focus on stain removal, energy efficiency, and smart features make it an asset for those looking to simplify their laundry routine without compromising on results.