Location of controls, Drive safe | Emerson EM-253 instruction

Location of controls

Power button

Power ON/OFF

LED indicator light Answer/Reject incoming calls Dial last number

Pair

Volume down Volume down/

microphone mute

Volume up Volume up/ conversation switch/ microphone mute

Microphone

Mini USB port

Ear hook

Wireless Headset

Model EM-253

FCC and telephone company information

FCC Part 15

This equipment has been tested and found to comply with the requirements for a Class B digital device under Part 15 of the Federal Communications Commission (FCC) rules. These requirements are intended to provide reasonable protection against harmful interference in a residential installation. This equipment generates, uses and can radiate radio frequency energy and, if not installed and used in accordance with the instructions, may cause harmful interference to radio communications. However, there is no guarantee that interference will not occur in a particular installation. If this equipment does cause harmful interference to radio or television reception, which can be determined by turning the equipment off and on, the user is encouraged to try to correct the interference by one or more of the following measures:

●Re-orient or relocate the receiving antenna.

●Increase the separation between the equipment and receiver.

●Connect the equipment into an outlet on a circuit different from that to which the receiver is connected.

consult the dealer or an experienced radio/TV technician for help.

Changes or modifications to this equipment not expressly approved by the party responsible for compliance could void the user’s authority to operate the equipment.

Drive safe

Driving while talking on your mobile phone is dangerous, and illegal in many states.

Although this device enables drivers to conduct handsfree conversations, it is still dangerous to drive and use a mobile phone at the same time.

We recommend pulling over before making or answering calls, especially during adverse driving conditions. Please use your mobile phone, and our product responsibly while driving!

Safety information

●Check local laws regarding use of a mobile handset and wireless headset while driving. If you use the Bluetooth Headset while driving, ensure your attention and focus remains on your driving.

●Observe all signs in the designated areas where some electronic devices or RF radio products are required to be switched off. These could include airplanes, hospitals, blasting areas, and potentially explosive atmospheres.

Speaker

IN THE BOX:

Bluetooth	USB Cable	Car Charger	Travel Charger	Owner’s
Headset				Manual

1Charging the Bluetooth headset

1.Connect the USB cable to the charging socket on the handset.

2.Connect the USB cable to:

●AC Charger, and plug into a wall (A/C) outlet.

●Computer’s USB port.

●Car Charger.

3.The RED LED indicator light turns on.

4.The RED LED indicator light shuts off when the headset is fully charged. (approximately 2 hours)

NOTE: Make sure you charge your headset for two hours before using it for the first time.

2Pairing the headset with a Bluetooth enabled phone

1.Keep your Bluetooth Headset and mobile phone within 3 feet of each other during pairing.

2.Make sure the Bluetooth Headset is turned off.

3.Press and hold the [POWER] button until the RED and BLUE lights flash alternately.

EM253

4.Set the phone to search for bluetooth devices.

5.When the phone finds the headset, confirm by selecting EM252 from the list.

EM253

EM253 added

1234

EM-253 specifications

The Emerson EM-253 is a cutting-edge device that combines user-friendly design with advanced technology, tailored to meet the demands of modern users. This versatile equipment is widely used in various applications, including home automation, consumer electronics, and industrial control systems. One of its standout features is its high-performance microcontroller, which allows for seamless integration with multiple platforms and devices, ensuring compatibility with a wide range of applications.

One of the primary characteristics of the EM-253 is its robust connectivity options. The device supports various communication protocols, including Bluetooth, Zigbee, and Wi-Fi, enabling it to connect effortlessly to smart home systems and IoT networks. This flexibility allows users to control and monitor their devices remotely, providing convenience and ease of use.

In addition to its connectivity capabilities, the EM-253 boasts impressive power management features. It is designed to operate with low power consumption, making it an ideal choice for battery-operated devices and applications where energy efficiency is critical. The device’s power-saving modes extend battery life while maintaining performance, ensuring that users can rely on it for extended periods.

The Emerson EM-253 also includes advanced security features that ensure data integrity and user privacy. With built-in encryption and authentication protocols, users can be confident that their information is protected against unauthorized access. This is particularly important in today’s connected landscape, where cyber threats are increasingly prevalent.

Another notable aspect of the EM-253 is its intuitive user interface. The device comes with a user-friendly display and easy navigation options, allowing for straightforward operation. Whether for casual users or professionals, the EM-253 provides an accessible and efficient experience.

Moreover, the EM-253 is designed with versatility in mind. Its compact and lightweight form factor enables easy installation in a variety of settings. Whether mounted on a wall or placed on a countertop, the device can fit seamlessly into any environment.

In conclusion, the Emerson EM-253 stands out as a powerful and versatile device in the realm of modern technology. With its advanced connectivity, energy-efficient operation, robust security features, and user-friendly design, it is well-suited for a variety of applications, enhancing both convenience and functionality for users across different sectors.