Product Safety, Installation | Hotpoint HM312I specs

PRODUCT SAFETY

ATTENTION

Read your manual carefully since it contains instructions which will ensure safe installation, use and maintenance of your appliance.

Your Refrigerator is built to International safety standards (EN60) and has been awarded the European approval mark (IMQ) for compliance with UK electrical safety requirements. It also meets the EC standards on the prevention and elimi- nation of radio interference (EC directive 87/308 - 02.06.89).

1.This appliance must not be installed outdoors - not even in an area protected by a roof. It is extremely dangerous to leave it exposed to rain or storms.

2.It must only be used by adults and exclusively to refriger- ate and freeze foodstuffs, following the instructions for use contained in this manual.

3.Do not ever touch or handle the appliance with bare feet or with wet hands or feet.

4.It is highly recommended that you do not use extension cords or multiple socket adapters. If the refrigerator is in- stalled between cabinets, make sure that the cord is not bent or dangerously pinched or compressed.

5.Never pull on the cord or the refrigerator to remove the plug from the wall socket - this is very dangerous.

6.Never touch the cooling components within the appli- ance, especially with wet hands because this could result in injury.

INSTALLATION

To ensure that the appliance operates properly and to reduce energy consumption, it is important that the appliance is installed correctly.

Ventilation

The compressor and condenser generate heat and, therefore, need to be ventilated properly. Areas not adequately ventilated are not suitable for this appliance. Therefore it should be installed in a room with an opening (eg. window) that provides the appropriate amount of air re-circulation. It is also important that the room is not too humid.

Away from Heat

Avoid positioning the appliance in a place where it is directly exposed to sunlight or near an oven, hob or the like.

7.Never put ice cubes just removed from the freezer into your mouth because they could stick to your mouth and cause burns.

8.Never clean the appliance or perform maintenance without first disconnecting it from the electrical mains. Turning the

thermostat knob to the setting does not suffice to break all electrical contact with the mains.

9.Before having your old refrigerator picked up for disposal, remove or make inoperable any locking devices to prevent children who might play in or around the appliance from being locked inside.

10.Before calling for service/assistance in the case of mal- function, consult the chapter entitled “TROUBLESHOOTING" to determine whether it is possible to eliminate the problem. Do not try to repair the problem by trying to access the inter- nal components of the appliance.

11.If damaged, the power supply cord on this appliance must necessarily be replaced by our service centre because special tools are required for replacement.

12.Do not use electric appliances inside the compartment for food storage, if these are not those recommended by the manufacturer.

13.At the end of the functional life of your appliance – containing cyclopentane gas in the insulation foam and perhaps gas R600a (isobutane) in the refrigeration circuit – the latter should made safe before being sent to the dump. For this operation, please contact your dealer or the Local Organisation in charge of waste disposal.

Electrical Connection and Earthing

Before proceeding with the electrical connection, make sure that the voltage indicated on the rating plate, located within the freezer, corresponds to the mains voltage in your homeand that the socket is fitted with a standard earthing wire in ac- cordance with safety standards for 46/90 systems. If the socket is not fitted with an earthing wire, the manufacturer will not be held liable for any damages and/or injuries arising out of the use of the appliance. Do not use multiple sockets or adapters.

Position the appliance in such a way that you can access the socket where it is plugged in.

Insufficient power?

The electrical socket must be able to handle the maximum power load of the appliance, which is indicated on the rating plate located within the freezer.

Before making the electrical connection ...

After the appliance has been delivered, place it in the verti- cal upright position and wait at least 3 hours before inserting the plug into the socket in order to ensure that it functions properly.

HM312I specifications

The Hotpoint HM312I is a versatile and efficient integrated fridge freezer that enhances the functionality and aesthetics of any modern kitchen. Designed to fit seamlessly into your cabinetry, it delivers ample storage options while maintaining a compact footprint.

One of the standout features of the HM312I is its impressive total storage capacity, boasting around 260 liters, which includes a generous refrigeration section and a dedicated freezer compartment. This allows users to store and organize a wide variety of groceries and frozen foods without compromising on space. The fridge section includes adjustable shelves made from sturdy glass, making it easy to customize the layout to accommodate larger items.

The HM312I utilizes advanced cooling technologies to preserve food freshness and flavor. The innovative No Frost system prevents ice buildup in the freezer, eliminating the need for manual defrosting. This technology not only saves time but also ensures that food is stored under optimal conditions, maintaining its quality for longer periods.

Another notable characteristic of the Hotpoint HM312I is its Active Fresh Technology, which regulates humidity levels in the fridge. This feature creates an ideal environment for fruits and vegetables, extending their shelf life and maintaining their nutritional value.

Energy efficiency is a priority for the HM312I, boasting an A+ energy rating. This means it operates with reduced energy consumption, which is beneficial both for the environment and for your utility bills. The appliance is equipped with LED internal lighting, which not only illuminates the contents effectively but also consumes less energy than traditional lighting solutions.

The integrated design of the HM312I ensures that it blends seamlessly into any kitchen setup. With a reversible door feature, users have the flexibility to customize the door swing direction, allowing for easier access based on the kitchen layout.

In summary, the Hotpoint HM312I integrated fridge freezer combines practical storage solutions with cutting-edge technology. Its spacious design, energy efficiency, and features like No Frost and Active Fresh Technology make it an excellent choice for those looking to enhance their kitchen while keeping food fresh and accessible. Whether you're an avid cook or simply need reliable refrigeration, the HM312I stands out as a dependable appliance tailored to modern needs.