Installation, Positioning and connection | Hotpoint HM315FF specification

Installation

		! Before operating your new appliance, please read these
	GB	! Before operating your new appliance, please read these
	GB	operating instructions carefully. They contain important
		information for safe use, installation and care of the
		information for safe use, installation and care of the
		appliance.
		! Please keep these operating instructions for future
		reference. Pass them on to possible new owners of the
		appliance.
		Positioning and connection

Positioning

1.Place the appliance in a well-ventilated humidity-free room.

2.Do not obstruct the rear fan grills. The compressor and condenser give off heat and require good ventilation to operate correctly and save energy.

3.Ensure the appliance is far away from any sources of heat (direct sunlight, electric stove, etc.).

Electrical connections

After transportation of the appliance, carefully place it vertically and wait at least 3 hours before connecting it to the electricity mains. Before inserting the plug into the electrical socket ensure the following:

•The appliance is earthed and the plug is compliant with the law.

•The socket can withstand the maximum power of the appliance, which is indicated on the data plate located on the bottom left side of the fridge (e.g. 150 W).

•The voltage must be in the range between the values indicated on the data plate located on the bottom left side (e.g. 220-240V).

•The socket is compatible with the plug of the appliance. If the socket is incompatible with the plug, ask an authorised technician to replace it (see Assistance). Do not use extension cords or multiple sockets.

!Once the appliance has been installed, the power supply cable and the electrical socket must be easily accessible.

!The cable must not be bent or compressed.

!The cable must be checked regularly and replaced by authorised technicians only (see Assistance).

!The manufacturer declines any liability should these safety measures not be observed.

Your appliance is supplied with a 13amp fused plug that can be plugged into a 13amp socket for immediate use. Before using the appliance please read the instructions below.

WARNING:

THIS APPLIANCE MUST BE EARTHED.

Replacing fuse covers:

When replacing a faulty fuse, a 13amp ASTA approved fuse to BS 1362 should always be used and the fuse cover re-fitted.

If the fuse cover is lost, the plug must not be used until a replacement is obtained.

Replacement fuse covers:

If a replacement fuse cover is fitted, it must be of the correct colour as indicated by the coloured marking or the colour that is embossed in words on the base of the plug.

Changing the plug:

Removing the plug

If your appliance has a non-rewireable moulded plug and you should wish to remove it to add a longer cable or to re-route the mains cable through partitions, units etc. please ensure that either:

- The plug is replaced by a fused 13amp re-

wireable plug bearing the BSI mark of approval.

-The mains cable is wired directly into a 13amp cable outlet, controlled by a switch (in compliance with BS 5733) which is accessible without moving the appliance.

Disposing of the plug

Cut off and dispose of the supplied plug if it does not fit your socket. The cable should be cut as close as possible to the moulded plug.

Remove the fuse.

WARNING:

To avoid a shock hazard do not insert the discarded plug into a socket anywhere else.

HM315FF specifications

The Hotpoint HM315FF is a versatile and efficient freezer fridge that embodies modern kitchen convenience. This freestanding appliance is designed for those who seek a perfect blend of functionality and aesthetic appeal. The HM315FF's sleek exterior and contemporary design make it an eye-catching addition to any kitchen layout.

One of the standout features of the Hotpoint HM315FF is its generous storage capacity. With the ability to accommodate a substantial amount of groceries, this model offers ample space for fresh produce, chilled items, and frozen goods. The fridge section typically boasts adjustable shelves, which allow for customizable organization. This ensures you can easily store items of varying sizes, maximizing the interior space.

Moreover, the HM315FF is equipped with a frost-free freezer compartment, eliminating the need for manual defrosting. This innovative technology helps maintain optimal storage conditions while ensuring that your food remains fresh for longer. The automatic defrost function prevents ice build-up, which is a common issue with traditional freezers, thus enhancing the overall efficiency of the appliance.

Energy efficiency is another key characteristic of the Hotpoint HM315FF. It usually comes with an A+ energy rating, signifying lower energy consumption, which is not only economical but also environmentally friendly. By reducing energy usage, this appliance contributes to your household’s sustainability efforts and helps keep utility bills in check.

In addition, the HM315FF includes various technological features that enhance user experience. This may involve adjustable temperature controls, LED lighting for better visibility, and a reliable cooling system that ensures consistent performance. The appliance is designed to operate quietly, providing a peaceful kitchen environment while maintaining optimal cooling conditions.

Safety features, such as a door alarm that alerts users if the door has been left ajar, offer added peace of mind. This ensures food safety and reduces the risk of energy wastage.

Overall, the Hotpoint HM315FF combines practicality with efficiency, making it an ideal choice for families and individuals alike. With its modern design, advanced technologies, and user-friendly features, the HM315FF effectively meets the demands of contemporary living while ensuring food is stored safely and conveniently.