5 - Using the BeerTender® System
* Always hold the appliance by the bottom edge when lifting.
* To obtain draught beer of optimal quality you should keep two basic factors in mind, the temperature of the beer and hygienic conditions. Follow these few simple steps for the ideal use of BeerTender®.
A new draught beer tube should be used with each DraughtKegTM
An initial package of draught beer tube is included with your machine. Additional draught beer tubes can be ordered from Heineken. Go to
www.BeerTender.com for more information.
Chilling the DraughtKeg
1. Before pouring a draught beer, it is very important that the Heineken and Heineken Premium Light DraughtKeg reach the correct temperature.
2. Ensure DraughtKeg is sufficiently chilled before pouring a draught beer. DraughtKegs will produce too much foam. It is ideal to purchase the DraughtKeg
a. Inside the BeerTender – Depending on the temperature of the DraughtKeg, it will take up to 18 hours to chill to the ideal serving temperature.
b. In a refrigerator – Depending on the temperature of your refrigerator, it will take up to
Tip: 12 hours to chill to the ideal serving temperature.
We recommend that you always keep an extra
DraughtKeg in your refrigerator to always have a chilled
DraughtKeg available.
Preparing the BeerTender
IMPORTANT: It is important that the BeerTender power switch is turned on before inserting the DraughtKeg. This allows the scale to reset and accurately measure the amount of beer left in the keg. If you remove a partially full DraughtKeg from an operating machine or open the lid while power is on, the scale will need to be reset.
ENGLISH
7