Maintenance, Descaling, Drip tray | Krups XP4050 instruction

•If your espresso machine runs short of water, a sonor signal and all leds blinking incite you to fill the water tank.

•Your espresso machine switches to stand by mode after 30 mn for energy saving and switches off after 1H 30 of none use.

Maintenance

-Never wash your espresso machine accessories in the dishwasher.

After use, the water tank must be emptied.

. Drip tray

This must be emptied after using the appliance after taking off the grid (19). If several espressos are being prepared one after the other, the drip tray should be emptied from time to time (about once every 7 - 8 espressos). The presence of water is normal and does not signify a leak. If necessary, clean the drip tray and its grid with water and a little non-abrasive washing-up liquid, rinse and dry. Replace it correctly (20).

.The brewing head, the filter and the filter holder

These must be cleaned after each use. All you need to do is wipe a damp cloth over the brewing head of your appliance and to wash the other accessories in water and a little non- abrasive washing-up liquid, rinse and dry.

If the brewing head is heavily clogged up, unscrew the grid, clean it and refit it, pressing down firmly (21).

When your espresso is not being used, do not leave the filter holder on the appliance to prevent wear on the gasket.

.The cup warming plate: remove this to clean it with water and a little non-abrasivewashing-up liquid, rinse and dry.

. The auto cappuccino accessory

For more thorough cleaning the auto cappuc- cino accessory can be dismantled from the appliance.

Clean it with water, a little non-abrasive washing-up liquid and a small brush. Rinse and dry it before refitting it.

Please note the direction of fitting the flexible tube : engage the straight-cut end in the auto cappuccino Accessory.

Descaling

•Descaling of your espresso should be done fairly frequently with citric or tartaric acid.

•Due to the acid substance, we recommend protecting your your worktop and sink unit during the descaling process, especially if it is made of marble or stone. Isolate your espresso with a tea towel, a tablecloth or a tray.

However, we would advise you to use the Krups descaling accessory, reference F054, which is available from Krups after-sales service centres. This accessory includes, apart from two descaling doses, a testing strip for water hardness to assess the frequency of descaling of your appliance in normal use. Descaling depends on the hardness of the water, but also on the use cycle. The frequency of descaling indicated by the F054 accessory is thus given by way of indication only.

- Then follow the following method:

•Unscrew the grid from the head of the appliance and clean it (21).

•Dissolve a sachet of KRUPS descaling accessory, reference F054, in half a litre of lukewarm water and pour the whole amount into the empty water tank.

•start the appliance (4).

•Place a container, as large as possible, beneath the auto cappuccino accessory.

•As soon as the blue operating control lamp glows continuously, the appliance is ready

•Pressing the hot water button (15), run through 1/3 of the liquid.

•Then, pressing the hot water button (15) to stop.

•Move the container under the brewing head.

•Run the second third of the liquid immediately by pressing the coffee button (10) as many times as necessary.

XP4050 specifications

The Krups XP4050 is a remarkable espresso machine that caters to both coffee enthusiasts and casual drinkers alike. With its sleek design and array of features, it stands out as a valuable addition to any kitchen.

One of the main highlights of the XP4050 is its advanced, built-in grinder. This integrated conical burr grinder allows users to grind fresh coffee beans just before brewing, ensuring maximum flavor and aroma in every cup. The machine offers multiple grind settings, which enables personalization of the grind size to suit individual preferences, from fine for espresso to coarser settings for drip coffee.

The XP4050 is equipped with a powerful 15-bar pressure pump, a key feature for producing rich, full-bodied espresso with a thick crema. The high pressure is essential for extracting the optimal flavors from the coffee grounds, resulting in a smooth, well-balanced shot. This model also includes a steam wand, allowing users to froth milk for lattes and cappuccinos. The steam control feature provides precision, enabling users to create microfoam for barista-quality beverages.

In addition to its brewing capabilities, the Krups XP4050 is designed with user convenience in mind. It features an intuitive control panel with easy-to-understand settings, making it simple to switch between different brewing options. The machine also includes a removable water tank, facilitating easy filling and cleaning.

The XP4050's compact footprint fits comfortably on kitchen counters, making it ideal for spaces of all sizes. Its elegant stainless-steel finish adds a touch of sophistication, while the durable construction ensures longevity.

Another noteworthy aspect of the Krups XP4050 is its integrated cleaning system. The machine features a self-cleaning function, which significantly reduces maintenance time and effort. Additionally, the detachable drip tray and brewing unit can be easily cleaned, helping to ensure that the machine remains in optimal condition.

In summary, the Krups XP4050 espresso machine showcases a combination of advanced technology, user-friendly features, and stylish design. Its built-in grinder, powerful pressure pump, and steam wand make it a versatile choice for any coffee lover, while the easy maintenance and compact size enhance its appeal. Whether you're a seasoned barista or just starting your coffee journey, the Krups XP4050 is an excellent option to explore.