Krups 466 manual Maintenance, Decalcifying

•Turn the selector switch to the “Prog”

Setting. The symbol will flash intermittently in the display area. Set the hour and minutes in which you would like the brewing process to commence by pressing the “H” and “min” buttons respectively. “Wake- Up” time is now set.

•Fill the water chamber to the desired number of cups. Place the carafe back on the warming plate. Put in ground coffee. Turn the selector switch to the “Auto”

setting. The symbol will remain constant in the display, indicating that the coffee maker has been programmed. At the pre- programmed time, the indicator light will illuminate, indicating that the brewing process has begun.

NOTE: If the selector switch is left in the “Auto” position, the coffee maker will turn itself on everyday at the pre-programmed time. If you do not wish for this to occur, turn the coffee maker to the “Off” position after each use.

Programming auto shut-off (model #467)

The programmable auto shut-off feature allows you to keep coffee hot for up to 5 hours, and to shut off automatically, to suit your needs. The auto shut-off will initially be set to shut-off after 1 hour, unless otherwise programmed. Auto shut-off will be effective not only when you are manually preparing coffee, but also when used with the wake-up timer.

When you first plug in the coffee maker, the auto shut-off will be programmed for 1 hour. To adjust the keep warm time:

•Turn the switch to the “Off” position.

•Press the “min” button. The blinking cup will appear in the display and auto shut off will be set at 1 hour.

•You can increase the keep warm time in increments of 1 hour, up to 5 hours by keeping the “min” button pressed and additionally pressing the “H” button.

•Once you have programmed the keep warm time, it will be stored in memory until manually changed.

•If no keep warm time is set, the coffee maker will automatically shut itself off after 1 hour.

Maintenance

Replacing the “ Duo Filter ”

•For the non-time model (#466), the Duo Filter replacement indicator (f) will turn red when it is time to change the filter. The indicator light will remain red for five uses and then will return to white automatically.

•For the timer model (#467), the Duo Filter replacement indiator (f) will flash. After replacing the Duo Filter, press the reset button (m) with a pointed item.

•To replace the Duo Filter, see “Inserting the Duo Filter” in the “Before First Use” section.

IMPORTANT:

•It is recommended to replace the Duo Filter at least once every 3 months. You can purchase the DuoFilter (Model #472) at your local KRUPS retailer or by calling KRUPS Consumer Service Department at 1-800- 526-5377, 24 hours a day, 7 days a week.

•If the machine will not be in use for an extended period of time, rinse the Duo Filter with running water and clean the coffee maker.

•Only use drinking water with the DuoFilter.

Decalcifying

When to decalcify:

•Minerals found in water can clog the coffee maker or reduce its speed. You will know when such a cleaning is necessary by an obvious slowdown in the brewing time. This extended time indicates that there is a cal- cium deposit in your coffee maker.

•Thanks to the anti-scale action of the Duo Filter you will generally only need to descale every two to four months depending on the hardness level of your water.

To decalcify:

•Fill the carafe one quarter full of vinegar, then add cold tap water to the top. Pour the water/vinegar mixture into the reservoir opening.

•Place the empty carafe on the warming plate and turn on the machine. After the water/

10