Hotpoint 23 operating instructions About TurboCool, How it Works, How to Use

Page 6

About the temperature controls.

The temperature controls are preset in the factory at 5 for both the refrigerator and freezer compartments. Allow 24 hours for the temperature to stabilize to the preset settings.

Several adjustments may be required. Each time you adjust controls, allow 24 hours after each adjustment for the refrigerator to reach the setting you have selected.

Setting either or both controls to 0 stops cooling in both the freezer and refrigerator compartments, but does not shut off electrical power to the refrigerator.

Control settings will vary based on personal preferences, usage and operating conditions and may require more than one adjustment.

NOTE: The refrigerator is shipped with protective film covering the temperature controls. If this film was not removed during installation, remove it now.

Ambient Room Temperature Limits

This refrigerator is designed to operate in ambient temperatures specified by its Temperature Class, which is marked on the rating plate.

Temperature

Symbol

Ambient Temperature

Class

 

Maximum

Minimum

 

 

 

 

Extended-

 

 

 

Temperate

SN

32°C

10°C

Temperate

N

32°C

16°C

Subtropical

ST

38°C

18°C

Tropical

T

43°C

18°C

NOTE: Internal temperature may be affected by such factors as the location of the refrigerator, ambient temperature and frequency of door openings. Adjust temperature controls as required to compensate for these factors.

About TurboCool.

How it Works

TurboCool rapidly cools the refrigerator compartment in order to more quickly cool foods. Use TurboCool when adding a large amount of food to the refrigerator compartment, putting away foods after they have been sitting out at room temperature or when putting away warm leftovers. It can also be used if the refrigerator has been without power for an extended period.

 

Once activated, the compressor will turn on

 

immediately and the fans will cycle on and

 

off at high speed as needed for eight hours.

 

The compressor will continue to run until the

 

refrigerator compartment cools to approximately

6

1°C, then it will cycle on and off to maintain

this setting. After 8 hours, or if TurboCool is

pressed again, the refrigerator compartment will return to the original setting.

How to Use

Press TurboCool. The TurboCool indicator light will come on.

After TurboCool is complete, the TurboCool indicator light will go out.

NOTES:

The refrigerator temperature cannot be changed during TurboCool.

The freezer temperature is not affected during TurboCool.

When opening the refrigerator door during TurboCool, the fans will continue to run if they have cycled on.

Image 6
Contents Refrigerators Serial #Safety Precautions Before You Throw Away Your Old Refrigerator or Freezer RefrigerantsAbout the temperature controls Ambient Room Temperature LimitsColder Warmercolder How to Use About TurboCoolHow it Works ExpressThaw ExpressChill How to UseAbout CustomCool. on some models Select the ExpressThaw , ExpressChillCustomCool Chart Citrus Setting 6CAbout the water filter Water Filter Cartridge on some modelsRefrigerator Doors About the refrigerator doorsAbout the shelves and bins Refrigerator Door Bins and Freezer Door Tilt-Out BinsSlide-Out Spillproof Shelf QuickSpace ShelfRemovable Beverage Rack Slide-Out Freezer Shelves Deep Freezer BasketsFreezer Baskets Fixed Freezer ShelvesAbout the freezer compartment Loading the Freezer CompartmentFreezer Performance About the crispers and pans About crisper removalAbout the automatic icemaker Automatic IcemakerIce Storage Drawer Locking the Dispenser on some models About the ice and water dispenser. on some modelsTo Use the Dispenser Dispenser Light on some modelsCleaning the Inside Care and cleaning of the refrigeratorCleaning the Outside Ice Storage Drawer on Dispenser ModelsBehind the Refrigerator Preparing for VacationPreparing to Move Freezer Compartment Replacing the light bulbsRefrigerator Compartment-Upper Light DispenserMm or Raised Panel Trim kits and decorator panelsPanels less than 6 mm thick Read these instructions completely and carefullyDimensions for Custom Wood Panels Freezer Panel Without Dispenser With DispenserInsert the Bottom Freezer Panel. on dispenser models Inserting the door panelsInsert the Freezer Panel and Refrigerator Panel Attach the Top Trim on the Freezer and Refrigerator DoorsInstall the Side Trim These pieces are tucked inside the refrigerator door handleClearances DimensionsBefore YOU Begin Water Supply to the IcemakerRollers Door AlignmentDimensions and Specifications Tools YOU will Need Remove the Base GrilleClose the Freezer and Refrigerator Doors Remove the Freezer Door Remove the Refrigerator DoorReplacing the Doors However, please note the followingInstalling the Water Line Connect the Tubing to the RefrigeratorStart the Icemaker Turn the Water on and Plug in the RefrigeratorNormal operating sounds Hummm WhooshBefore you call for service… Problem Possible Causes What To DoCube dispenser does Small or hollow cubesSlow ice cube freezing Not workEqual to Set temperature Temperatures are OKActual temperature not Select Temp feature isImportant Safety Instructions Before You Begin Shut Off the Main Water SupplyConnecting the Tubing to the Shutoff Valve Connecting the Tubing to the RefrigeratorTurn the Water On Plug In the RefrigeratorStart the Icemaker

23 specifications

Hotpoint is a renowned brand in the field of home appliances, and their Hotpoint 23 model exemplifies their commitment to quality, functionality, and contemporary design. The Hotpoint 23 is particularly notable for its advanced features, which cater to the needs of modern households.

One of the primary features of the Hotpoint 23 is its spacious capacity, which can accommodate a variety of cooking needs. Whether you're reheating leftovers or cooking a family meal, the Hotpoint 23 offers enough space to handle it all. Its interior design allows for flexibility, with adjustable shelves that can be reorganized to suit various dish sizes.

This model also boasts a range of cooking technologies that enhance the cooking experience. One standout feature is the combination of microwave and grill functions. This dual cooking capability allows users to quickly cook food while achieving a desirable crispy texture on the outside. The grill function is especially beneficial for preparing dishes like grilled chicken or crispy vegetables, ensuring a well-rounded meal with minimal effort.

Energy efficiency is another critical characteristic of the Hotpoint 23. Designed with eco-friendly technologies, this appliance reduces energy consumption, which is not only beneficial for the environment but also helps lower utility bills. It is equipped with various energy-saving settings that allow users to optimize their cooking processes, making it ideal for environmentally-conscious consumers.

The Hotpoint 23 also places a strong emphasis on user-friendly operation. It features an intuitive control panel that provides quick access to different cooking modes and settings. Users can easily navigate through options, ensuring that meals can be prepared efficiently. Furthermore, the model includes pre-programmed cooking settings that simplify the process, allowing users to achieve perfect results without needing to monitor closely.

Safety is another priority for Hotpoint, and the Hotpoint 23 includes several safety features such as a child lock, preventing accidental use by young children. The appliance also has an automatic shut-off function, which enhances safety during operation.

In summary, the Hotpoint 23 is an impressive kitchen appliance that combines spacious cooking capacity, innovative cooking technologies, energy efficiency, user-friendly operation, and essential safety features. Whether for a busy family or a culinary enthusiast, the Hotpoint 23 is designed to meet diverse cooking needs while ensuring convenience and reliability. Its thoughtful design and advanced functionalities make it a valuable addition to any modern kitchen.