Whirlpool UXT2036AA dimensions Product Model Numbers, Cabinet Dimensions Location Requirements

Page 1

Range Hood - 30" (76.2 cm) and 36" (91.4 cm)

PRODUCT MODEL NUMBERS

UXT2030AA UXT2036AA

Electrical:

A 120 Volt, 60 Hz., AC only, 15-amp, fused electrical circuit is required.

If the house has aluminum wiring, follow the procedure below:

1.Connect a section of solid copper wire to the pigtail leads.

2.Connect the aluminum wiring to the added section of copper wire using special connectors and/or tools designed and UL listed for joining copper to aluminum.

Follow the electrical connector manufacturer's recommended procedure. Aluminum/copper connection must conform with local codes and industry accepted wiring practices.

Wire sizes and connections must conform with the rating of the appliance as specified on the model/serial rating plate. The model/serial plate is located behind the filter on the rear wall of the range hood.

Wire sizes must conform to the requirements of the National Electrical Code, ANSI/NFPA 70 (latest edition), or CSA Standards C22. 1-94, Canadian Electrical Code, Part 1 and C22.2 No. 0-M91 (latest edition) and all local codes and ordinances.

CABINET DIMENSIONS

LOCATION REQUIREMENTS

IMPORTANT: Observe all governing codes and ordinances.

It is the installer's responsibility to comply with installation clearances specified on the model/serial rating plate. The model/serial rating plate is located inside the range hood on the rear wall.

Range hood location should be away from strong draft areas, such as windows, doors and strong heating vents.

Cabinet opening dimensions that are shown must be used. Given dimensions provide minimum clearance. Consult the cooktop/range manufacturer installation instructions before making any cutouts.

Grounded electrical outlet is required. See “Electrical Requirements” section.

The range hood is factory set for venting through the roof or wall.

All openings in ceiling and wall where range hood will be installed must be sealed.

For Mobile Home Installations

The installation of this range hood must conform to the Manufactured Home Construction Safety Standards, Title 24 CFR, Part 328 (formerly the Federal Standard for Mobile Home Construction and Safety, Title 24, HUD, Part 280) or when such standard is not applicable, the standard for Manufactured Home Installation 1982 (Manufactured Home Sites, Communities and Setups) ANSI A225.1/NFPA 501A*, or latest edition, or with local codes.

PRODUCT DIMENSIONS

29 ⁷⁄₈" (75.9 cm)

12"

35 ⁷⁄₈" (91.1 cm)

(30.5 cm)

7" (17.8 cm)

 

Round vent

5 ³⁄₄"

 

(14.6 cm)

Centerline

6"

 

 

(15.2 cm)

18" (45.7 cm) min. clearance upper cabinet to countertop

30" (76.2 cm) 36" (91.4 cm) cabinet opening width

18" (45.7 cm) min. 24" (61.0 cm) suggested max. bottom of range hood to cooking surface

13" (33 cm) cabinet depth

 

2"

 

17 ⁵⁄₈"

(5.1 cm)

Rear of hood

 

Centerline

(44.8 cm)

³/₄" (19.1 cm)

7¹⁄₂"

 

 

 

(19.1 cm)

Wiring knockouts

VENTING REQUIREMENTS

Vent system can terminate either through the roof or wall. Use a 7" (17.8 cm) round vent with a maximum length of 26 ft (7.9 m) for vent system.

Vertical Roof Venting

A

D

B

 

Horizontal Wall Venting

A

B

D

36" (91.4 cm) base cabinet height

C

C

A. 7" (17.8 cm) round through roof

A. 7" (17.8 cm) round through

B. Round vent: Use 7" (17.8 cm)

the wall

round damper.

B. Round vent: Use 7" (17.8 cm)

C. 18" (45.7 cm) to 24" (61.0 cm)

round damper.

above cooking surface

C. 18" (45.7 cm) to 24" (61.0 cm)

D. Roof cap

above cooking surface

 

D. Wall cap

Page 1 of 2

Because Whirlpool Corporation policy includes a continuous commitment to improve our products, we reserve the right to change materials and specifications without notice.

Dimensions are for planning purposes only. For complete details, see Installation

Ref. W10133060

Instructions packed with product. Specifications subject to change without notice.

03-26-10

Image 1
Contents Product Dimensions Cabinet Dimensions Location RequirementsProduct Model Numbers Venting RequirementsCm Vent System Vent Piece Cm Round Calculating Vent System LengthExample vent system Maximum Length = 26 ft 7.9 m
Related manuals
Manual 8 pages 60.62 Kb

UXT2036AA, UXT2030AA specifications

Whirlpool has long been a trusted name in home appliances, and the UXT2030AA and UXT2036AA range hood models are perfect examples of the brand's commitment to performance, style, and functionality in the kitchen. These two models bring effective ventilation solutions while complementing a wide array of kitchen designs.

A standout feature of the UXT2030AA and UXT2036AA is their sleek, contemporary design. Both models come in a clean and classic stainless steel finish, which adds a touch of elegance and is versatile enough to fit seamlessly with different kitchen aesthetics. The low-profile design not only allows for efficient air circulation but also contributes to a streamlined look above the cooking area.

In terms of performance, these range hoods are engineered to provide powerful ventilation. The UXT2030AA boasts a 190 CFM ventilation capacity, while the UXT2036AA takes it up a notch with a robust 260 CFM. This means that both models can effectively eliminate smoke, steam, and odors from your kitchen, ensuring a pleasant cooking environment.

Another important aspect of the Whirlpool UXT range hoods is the multi-speed fan control. Users can easily adjust the fan speed according to their cooking needs. Whether you’re simmering a sauce or frying up a storm, these range hoods provide the flexibility to manage airflow efficiently.

Moreover, both the UXT2030AA and UXT2036AA focus on user convenience with their easy-to-clean filters. The grease filters are designed for easy maintenance, making it simple to keep the range hoods in optimal working condition. The filters are dishwasher-safe, allowing for hassle-free cleaning, thereby promoting longevity and sustained ventilation performance.

For those who value quiet operation, these models are designed to minimize noise levels while in use. The efficient motor operates with reduced sound output, making conversations or listening to music in the kitchen an enjoyable experience.

Lastly, these range hoods feature bright, halogen lighting that illuminates the cooking surface below. This added visibility enhances the cooking experience, ensuring that users have a clear view of their food preparations.

In summary, the Whirlpool UXT2030AA and UXT2036AA range hoods deliver exceptional performance with their powerful ventilation capabilities, sleek designs, multi-speed fan controls, easy-to-clean filters, and low noise levels. Whether updating an existing kitchen or outfitting a new one, these models exemplify the balance of style and functionality, embodying Whirlpool's dedication to quality home appliances.