Hotpoint RZS150P, RZS150G manual Installation, Positioning and connection

Page 2

Installation

 

! Before placing your new appliance into operation

GB

please read these operating instructions carefully. They

 

contain important information for safe use, for installation

 

 

and for care of the appliance.

 

! Please keep these operating instructions for future

 

reference. Pass them on to possible new owners of the

 

appliance.

Positioning and connection

Positioning

1. Place the appliance in a well-ventilated humidity-free room.

2. Do not obstruct the rear fan grills. The compressor and condenser give off heat and require good ventilation to operate correctly and save energy.

3. Leave a space of at least 10 cm between the top part of the appliance and any furniture above it, and at least 5 cm between the sides and any furniture/side walls.

4. Ensure the appliance is away from any sources of heat (direct sunlight, electric stove, etc.).

5. In order to maintain the correct distance between the appliance and the wall behind it, fit the spacers supplied in the installation kit, following the instructions provided.

Levelling

1.Install the appliance on a level and rigid floor.

2.If the floor is not perfectly horizontal, adjust the refrigerator by tightening or loosening the rear feet.

Electrical connections

After the appliance has been transported, carefully place it vertically and wait at least 3 hours before connecting it to the electricity mains. Before inserting the plug into the electrical socket ensure the following:

•The appliance is earthed and the plug is compliant with the law.

•The socket can withstand the maximum power of the appliance, which is indicated on the data plate located inside the freezer (e.g. 150 W).

•The voltage is in the range of values indicated on the data plate located inside the freezer (e.g. 220-240V).

•The socket is compatible with the plug of the appliance. If the socket is incompatible with the plug, ask an authorised technician to replace it (see Assistance). Do not use

extension cords or multiple sockets.

!Once the appliance has been installed, the power supply cable and the electrical socket must be easily accessible.

!The cable must not be bent or compressed.

!The cable must be checked regularly and replaced by authorised technicians only (see Assistance).

!The manufacturer declines any liability should these safety measures not be observed.

Connection of the water supply

To carry this out, use the kit provided which contains all the necessary elements for connection to the water supply.

To improve the performance of the Aqua Care, we recommend that you fit a tap with a filter on the pipe for the connection to the water system: in this way it will be possible to manually interrupt the water supply during long periods in which Aqua Care is not used.

!The water pressure inside the water system must be between 0.8 bar and 8 bar.

!The appliance must only be connected to a water supply suitable for drinking.

Your appliance is supplied with a 13amp fused plug that can be plugged into a 13amp socket for immediate use. Before using the appliance please read the instructions below.

WARNING:

THIS APPLIANCE MUST BE EARTHED.

Replacing fuse covers:

When replacing a faulty fuse, a 13amp ASTA approved fuse to BS 1362 should always be used and the fuse cover re-fitted.

If the fuse cover is lost, the plug must not be used until a replacement is obtained.

Replacement fuse covers:

If a replacement fuse cover is fitted, it must be of the correct colour as indicated by the coloured marking or the colour that is embossed in words on the base of the plug.

Changing the plug:

Removing the plug

If your appliance has a non-rewireable moulded plug and you should wish to remove it to add a longer cable or to re-route the mains cable through partitions, units etc. please ensure that either:

- The plug is replaced by a fused 13amp re- wireable plug bearing the BSI mark of approval.

or

-The mains cable is wired directly into a 13amp cable outlet, controlled by a switch (in compliance with BS 5733) which is accessible without moving the appliance.

2

Page 1 Page 3
Image 2
Page 1 Page 3
Contents Operating Instructions FreezerInstallation Positioning and connectionReversible door Disposing of the plugDescription of the appliance Overall viewStarting the appliance Using the freezer to its full potentialStart-up and use Cleaning the appliance Maintenance and careGB Switching the appliance off Avoiding mould and unpleasant odoursDisposal Precautions and tipsGeneral safety Respecting and conserving the environmentTroubleshooting Malfunctions Possible causes / SolutionsGuarantee After Sales Service Page 195073398.02

RZS150G, RZS150P specifications

The Hotpoint RZS150P and RZS150G are compact refrigerator models designed to deliver both functionality and style for modern kitchens and small living spaces. These two models are particularly popular among users who seek reliability combined with energy efficiency, maximizing storage while minimizing space usage.

The main feature of the Hotpoint RZS150P and RZS150G is their impressive capacity for storage within a compact footprint. Both models offer a total net capacity of approximately 150 liters, providing ample room for groceries, beverages, and other food items without overwhelming your kitchen area. Their internal layout is thoughtfully designed, featuring adjustable glass shelves that allow users to customize the space for larger items, alongside a salad crisper drawer to keep fruits and vegetables fresh.

One standout technology in both models is the "A+ Energy Rating," which highlights their energy efficiency. This rating signifies that they'll not only help reduce electricity bills but also promote an environmentally friendly lifestyle. The environmentally conscious consumer will appreciate these efficiency ratings as a part of their sustainable living choice.

Another characteristic of these models is their adjustable thermostat and easy-to-use temperature controls, allowing users to set the ideal conditions for various types of food. The RZS150P and RZS150G also come equipped with reversible doors, providing the flexibility to fit seamlessly into any kitchen layout. This feature facilitates installation in tight spaces, making these refrigerators a versatile option for apartments, dorms, or offices.

In terms of design, the RZS150P features a classic white finish, while the RZS150G boasts a sleek graphite color, catering to diverse aesthetic preferences. Both models emphasize simplicity and elegance, ensuring they blend well with existing kitchen decor.

Additional characteristics include noise-reduction technology, which makes these refrigerators quieter than many competing models. This makes them ideal for small living spaces where noise can be a concern. The interior light is another convenient feature, providing visibility when searching for items, especially in low-light conditions.

In summary, the Hotpoint RZS150P and RZS150G refrigerators not only maximize storage and functionality but also incorporate energy-efficient technology and sleek design. With their practical features, they represent an excellent choice for consumers seeking reliable and stylish refrigeration solutions in compact spaces.
Top Page Image Contents