GB Installation, Changing the plug | Hotpoint JFUFLxxxxx O3 instruction

GB Installation

!Before placing your new appliance into operation please read these operating instructions carefully. They contain important information for safe use, for installation and for care of the appliance.

!Please keep these operating instructions for future reference. Pass them on to possible new owners of the appliance.

Positioning and connection

Positioning

1.Place the appliance in a well-ventilated humidity-free room.

2.Do not obstruct the rear fan grills. The compressor and condenser give off heat and require good ventilation to operate correctly and save energy.

3.Leave a space of at least 10 cm between the top part of the appliance and any furniture above it, and at least 5 cm between the sides and any furniture/side walls.

4.Ensure the appliance is away from any sources of heat (direct sunlight, electric stove, etc.).

5.In order to maintain the correct distance between the appliance and the wall behind it, fit the spacers supplied in the installation kit, following the instructions provided.

Changing the plug:

Removing the plug

If your appliance has a non-rewireable moulded plug and you should wish to remove it to add a longer cable or to re-route the mains cable through partitions, units etc. please ensure that either:

-The plug is replaced by a fused 13amp re-wireable plug bearing the BSI mark of approval.

-The mains cable is wired directly into a 13amp cable outlet, controlled by a switch (in compliance with BS 5733) which is accessible without moving the appliance.

Disposing of the plug

Cut off and dispose of the supplied plug if it does not fit your socket. The cable should be cut as close as possible to the moulded plug.

Remove the fuse.

WARNING:

To avoid a shock hazard do not insert the discarded plug into a socket anywhere else.

Fitting a new plug

Levelling

1.Install the appliance on a level and rigid floor.

2.If the floor is not perfectly horizontal, adjust the refrigerator by tightening or loosening the front feet.

Electrical connections

After the appliance has been transported, carefully place it vertically and wait at least 3 hours before connecting it to the electricity mains. Before inserting the plug into the electrical socket ensure the following:

•The appliance is earthed and the plug is compliant with the law.

•The socket can withstand the maximum power of the appliance, which is indicated on the data plate located on the bottom left side of the fridge (e.g. 150 W).

•The voltage must be in the range between the values indicated on the data plate located on the bottom left side (e.g. 220-240V).

•The socket is compatible with the plug of the appliance. If the socket is incompatible with the plug, ask an authorised technician to replace it (see Assistance). Do not use extension cords or multiple sockets.

IMPORTANT:

WIRES IN THE MAINS LEAD ARE COLOURED IN ACCORDANCE

WITH THE FOLLOWING CODE...

Green and Yellow	- Earth
Blue	- Neutral
Brown	- Live

!Once the appliance has been installed, the power supply cable and the electrical socket must be easily accessible.

!The cable must not be bent or compressed.

!The cable must be checked regularly and replaced by authorised technicians only (see Assistance).

!The manufacturer declines any liability should these safety measures not be observed.

Your appliance is supplied with a 13amp fused plug that can be plugged into a 13amp socket for immediate use. Before using the appliance please read the instructions below.

WARNING:

THIS APPLIANCE MUST BE EARTHED.

Replacing fuse covers:

When replacing a faulty fuse, a 13amp ASTA approved fuse to BS 1362 should always be used and the fuse cover re-fitted.

If the fuse cover is lost, the plug must not be used until a replacement is obtained.

Replacement fuse covers:

If a replacement fuse cover is fitted, it must be of the correct colour as indicated by the coloured marking or the colour that is embossed in words on the base of the plug.

As the colours of the wires in the mains lead may not correspond with the coloured markings identifying the terminals in your plug, proceed as follows:

-Connect Green and Yellow wire to terminal marked 'E' or or coloured Green and Yellow.

-Connect Brown wire to terminal marked 'L' or coloured red or brown.

-Connect Blue wire to terminal marked 'N' or coloured Black or Blue.

If a 13amp plug (BS 1363) is used it must be fitted with a 13amp fuse.

If you are in any doubt about the electrical supply to your machine, consult a qualified electrician before use.

CE Marking certifies that this appliance conforms to the following EEC directives:

Low Voltage Equipment - 73/23/EEC & 93/68 EEC Electromagnetic Compatibility 89/336/EEC, 92/31/EEC & 93/ 68/EEC

PLEASE PHONE US TO REGISTER YOUR APPLIANCE AND ACTIVATE YOUR 5 YEAR PARTS GUARANTEE ON 08448 24 24 24

FFL xxxx x O3, JFUFLxxxxx O3 specifications

The Hotpoint FFL XXXX X O3 and JFUFLXXXXX O3 are the latest models from a brand renowned for its innovation and reliability in the home appliance sector. These washing machines represent a significant advancement in laundry technology, offering a blend of efficiency, performance, and user-friendly features that cater to modern households.

One of the standout features of the Hotpoint FFL XXXX X O3 is its robust design, which is not only aesthetically pleasing but also highly functional. The machine is engineered to handle large loads, making it ideal for families or those who frequently wash bulk items, such as bedding and towels. The generous drum capacity ensures that even the biggest loads can be cleaned effectively.

Equipped with an impressive array of washing programs, the FFL XXXX X O3 allows users to customize each wash according to their specific needs. From delicate fabrics to heavy-duty cycles, this model covers a wide range of materials and dirt levels. Additionally, the machine benefits from Hotpoint’s innovative 'Anti-Stain' technology, which actively helps to remove stubborn stains without the need for pre-treatment.

The JFUFLXXXXX O3 model takes user convenience to the next level with smart technologies such as Wi-Fi connectivity. This feature allows homeowners to control their washing machine remotely, meaning they can start or pause cycles, receive notifications, and monitor progress from their smartphones. This added level of convenience is perfect for those with busy lifestyles.

Energy efficiency is another hallmark of these models. Both the FFL XXXX X O3 and JFUFLXXXXX O3 boast excellent energy ratings, contributing to reduced electricity bills while also being kinder to the environment. Features like the 'Eco Wash' program allow users to save water and energy, making laundry days more sustainable.

In terms of noise levels, these washing machines are designed to operate quietly, allowing users to run their laundry at any time of day without disturbing the household. The innovative noise reduction technologies incorporated into both models ensure a peaceful environment.

Overall, the Hotpoint FFL XXXX X O3 and JFUFLXXXXX O3 are exemplary washing machines that combine practicality with innovative technologies. They offer an array of features specifically designed to make laundry straightforward, efficient, and eco-friendly, making them an excellent choice for modern-day laundry needs.