Hotpoint RZA36G.1, RZA36P.1 manual Maintenance, Door Reversal

Page 13
door stop

Maintenance

CLEANING &

MAINTENANCE

 

 

You will need a selection of small hand tools, screwdrivers, spanners etc. to carry out this procedure.

Our Service Department can arrange for an Engineer to do the conversion for you but a charge will be made.

Door Reversal

WARNING: Switch off electrical supply and pull out the mains plug.

Remove loose items/fittings from inside the fridge and place food into insulated containers whilst carrying out this operation.

1.Open the door as wide as possible.

Note : You may require assistance to do this:

2.Support the door and using a screwdriver, remove the screw securing the top hinge.

3.Carefully tilt the door to remove the hinge from the cabinet and lift the door off the bottom hinge.

4.Remove the spacing washers from the bottom hinge.

Note : You may require assistance to do this:

5.Using the packaging from the appliance or a suitable substitute to support the back of the appliance. Lay the appliance on it’s back ensuring the pipework at the back is not damaged or bent. Be careful that the appliance does not run away from you when the wheels touch the floor.

6.Unscrew the foot plate and hinge bracket fitted to the bottom right hand side of the appliance. Unscrew the foot and footplate fitted to the bottom left hand side of the appliance.

7.Refit the hinge bracket and the footplate to the opposite sides of the appliance. Screw in the feet until there is approximately 35mm projecting from the bottom front edge of the appliance.

8.Lift the appliance onto it’s feet. You may require assistance to do this: Lift the appliance from the rear of the tabletop and stand it on it’s feet and wheels. Be careful that the appliance does not run away from you when the wheels touch the floor.

9.Using a thin blunt instrument, remove the hinge bush cap from the top left of the door and refit on the top right.

10. If applicable - using a screwdriver, remove the door stop from the bottom right of the door and refit on the bottom left.

Note : You may require assistance to do this:

11.Replace the top hinge onto the door, slide the door onto the bottom hinge pin and support the door whilst screwing the top hinge into position. Ensure that the top hinge bracket is positioned correctly.

12.Adjust the front feet (see ‘Levelling’ SAFETY & INSTALLATION section).

Note : Let the appliance stand upright in it’s final location for at least 15 minutes before plugging in and switching on the electricity supply.

13

Page 12 Page 14
Image 13
Page 12 Page 14
Contents Getting Started For your safety, read the following advice For Your SafetyWhen installing your freezer When using your freezerLocation & Air Circulation InstallationMinimum space required to open door Fitting a Freezer under a Work Top LevellingFuses Electrical SupplyChanging the Plug Changing the Mains LeadControls Controlling the Temperature of the Freezer CompartmentRed High Temperature Warning Light Indicator Lights Green Mains LightMaking the best use of your Freezer Useful AdviceStoring Food in a Freezer Ice Tray Advice on Using Freezer DrawersDefrosting DefrostingFully defrosting your freezer Cleaning Interior CleaningExterior Door SealDoor Reversal MaintenanceTroubleshooting Operating Sounds of a Fridge Freezer GBGuarantee After Sales Service Page Page 195113368.00

RZA36P.1, RZA36G.1 specifications

The Hotpoint RZA36G.1 and RZA36P.1 are modern freestanding refrigerators designed to enhance your kitchen experience with a blend of style, technology, and functionality.

The RZA36G.1 model features a classic graphite finish, while the RZA36P.1 is offered in a pristine white finish catering to different kitchen aesthetics. Both models showcase a spacious interior, designed to meet the demands of busy households, ensuring that there is ample space to store fresh produce and beverages efficiently.

One of the standout features of the Hotpoint RZA36 series is the Energy Efficiency Class, which is designed to help consumers save on their electricity bills while being eco-friendly. Both models operate quietly and efficiently, thanks to advanced insulation and energy-efficient components, which also contribute to their exceptional A+ energy rating.

In addition, these refrigerators come equipped with Hotpoint's innovative No Frost technology. This feature prevents the build-up of ice or frost, eliminating the need for regular manual defrosting. With No Frost, users can enjoy optimal cooling performance and more usable space inside the fridge.

Another impressive aspect of the Hotpoint RZA36G.1 and RZA36P.1 models is the multi-air-flow system that ensures uniform air circulation throughout the refrigerator. This technology maintains consistent temperatures while preserving freshness and extending the shelf life of stored foods. Each compartment is specifically designed to accommodate various food types, from delicate fruits and vegetables to larger items.

For added convenience, these models include adjustable shelves, allowing users to customize the available space according to their storage needs. The transparent drawers are designed to make it easy to see and access stored items without hassle.

Additionally, both models incorporate interior LED lighting, providing clear visibility inside the fridge and adding an elegant touch to its overall design. The user-friendly controls make it simple to adjust settings for different temperature requirements.

Overall, the Hotpoint RZA36G.1 and RZA36P.1 successfully combine style, efficiency, and technology, making them ideal choices for anyone looking to modernize their kitchen with high-quality refrigeration solutions that cater to their daily needs.
Top Page Image Contents