Installation, Positioning and connection | Hotpoint HS16XX specification

Installation

		! Before placing your new appliance into operation
	GB	! Before placing your new appliance into operation
	GB	please read these operating instructions carefully. They
		contain important information for safe use, for installation

		and for care of the appliance.
		! Please keep these operating instructions for future
		reference. Pass them on to possible new owners of the
		appliance.

Positioning and connection

Positioning

1. Place the appliance in a well-ventilated humidity-free room.

2. Do not obstruct the rear fan grills. The compressor and condenser give off heat and require good ventilation to operate correctly and save energy.

3. Ensure the appliance is away from any sources of heat (direct sunlight, electric stove, etc.).

Electrical connections

After the appliance has been transported, carefully place it vertically and wait at least 3 hours before connecting it to the electricity mains. Before inserting the plug into the electrical socket ensure the following:

•The appliance is earthed and the plug is compliant with the law.

•The socket can withstand the maximum power of the appliance, which is indicated on the data plate located on the bottom left side of the fridge (e.g. 150 W).

•The voltage must be in the range between the values indicated on the data plate located on the bottom left side (e.g. 220-240V).

•The socket is compatible with the plug of the appliance. If the socket is incompatible with the plug, ask an authorised technician to replace it (see Assistance). Do not use extension cords or multiple sockets.

!Once the appliance has been installed, the power supply cable and the electrical socket must be easily accessible.

!The cable must not be bent or compressed.

!The cable must be checked regularly and replaced by authorised technicians only (see Assistance).

!The manufacturer declines any liability should these safety measures not be observed.

Your appliance is supplied with a 13amp fused plug that can be plugged into a 13amp socket for immediate use. Before using the appliance please read the instructions below.

WARNING:

THIS APPLIANCE MUST BE EARTHED.

Replacing fuse covers:

When replacing a faulty fuse, a 13amp ASTA approved fuse to BS 1362 should always be used and the fuse cover re-fitted.

If the fuse cover is lost, the plug must not be used until a replacement is obtained.

Replacement fuse covers:

If a replacement fuse cover is fitted, it must be of the correct colour as indicated by the coloured marking or the colour that is embossed in words on the base of the plug.

Changing the plug:

Removing the plug

If your appliance has a non-rewireable moulded plug and you should wish to remove it to add a longer cable or to re-route the mains cable through partitions, units etc. please ensure that either:

- The plug is replaced by a fused 13amp re- wireable plug bearing the BSI mark of approval.

-The mains cable is wired directly into a 13amp cable outlet, controlled by a switch (in compliance with BS 5733) which is accessible without moving the appliance.

Disposing of the plug

Cut off and dispose of the supplied plug if it does not fit your socket. The cable should be cut as close as possible to the moulded plug.

Remove the fuse.

WARNING:

To avoid a shock hazard do not insert the discarded plug into a socket anywhere else.

PLEASE PHONE US TO REGISTER YOUR APPLIANCE AND ACTIVATE YOUR 5 YEAR PARTS GUARANTEE ON 08448 24 24 24

HS16XX specifications

The Hotpoint HS16XX stands out as a versatile and efficient refrigerator designed to meet the diverse needs of modern households. This refrigerator offers an array of features that enhance food preservation, energy efficiency, and user convenience.

One of the main features of the Hotpoint HS16XX is its advanced cooling technology. Equipped with a multi-flow cooling system, it ensures that cold air circulates evenly throughout the refrigerator. This helps maintain a consistent temperature in all compartments, preventing hot spots and keeping food fresher for longer periods. Additionally, the HS16XX incorporates Active Oxygen technology, which helps to reduce the growth of bacteria and maintain a cleaner internal environment.

The interior of the Hotpoint HS16XX is designed for efficiency and organization. With adjustable shelves and door bins, users can customize the space to accommodate various food items, from tall bottles to small jars. The refrigerator also includes a dedicated crisper drawer for fruits and vegetables, designed to maintain optimal humidity levels for freshness.

Energy efficiency is another hallmark of the HS16XX. This model is designed with an A+ energy rating, making it an eco-friendly choice that not only helps the environment but also reduces energy bills. The inverter compressor technology further enhances its efficiency by adjusting the cooling power based on the contents of the fridge, ensuring lower energy consumption while maintaining the desired temperature.

Furthermore, the Hotpoint HS16XX features user-friendly controls and a clear LED display for easy temperature adjustments. The interior lighting utilizes energy-saving LEDs, providing clear visibility without consuming excessive power.

The design of the HS16XX is both sleek and modern, featuring a stainless steel finish that complements any kitchen decor. Its spacious capacity ensures that families can store all necessary grocery items without hassle.

In summary, the Hotpoint HS16XX is an excellent choice for those seeking a reliable refrigerator packed with innovative technologies. With its advanced cooling systems, adjustable organizational features, energy efficiency, and sleek design, this model delivers ideal food preservation solutions for contemporary living. Whether for a family or an individual, the HS16XX promises to be a valuable addition to any kitchen.