Hotpoint HUZ121 manual Replacing fuse covers, Replacement fuse covers, Disposing of the plug

Page 4

ELECTRICAL CONNECTION

Your appliance is supplied with a 13amp fused plug that can be plugged into a 13amp socket for immediate use. Before using the appliance please read the instructions below.

WARNING:

THIS APPLIANCE MUST BE EARTHED.

Replacing fuse covers:

When replacing a faulty fuse, a 13amp ASTA approved fuse to BS 1362 should always be used and the fuse cover re-fitted.

If the fuse cover is lost, the plug must not be used until a replacement is obtained.

Replacement fuse covers:

If a replacement fuse cover is fitted, it must be of the correct colour as indicated by the coloured marking or the colour that is embossed in words on the base of the plug.

Changing the plug:

Removing the plug

If your appliance has a non-rewireable moulded plug and you should wish to remove it to add a longer cable or to re-route the mains cable through partitions, units etc. please ensure that either:

- The plug is replaced by a fused 13amp re- wireable plug bearing the BSI mark of approval.

or

-The mains cable is wired directly into a 13amp cable outlet, controlled by a switch (in compliance with BS 5733) which is accessible without moving the appliance.

Disposing of the plug

Cut off and dispose of the supplied plug if it does not fit your socket. The cable should be cut as close as possible to the moulded plug.

Remove the fuse.

WARNING:

To avoid a shock hazard do not insert the discarded plug into a socket anywhere else.

Fitting a new plug

IMPORTANT:

WIRES IN THE MAINS LEAD ARE COLOURED IN

ACCORDANCE WITH THE FOLLOWING CODE...

Green and Yellow

-

Earth

Blue

-

Neutral

Brown

-

Live

As the colours of the wires in the mains lead may not correspond with the coloured markings identifying the terminals in your plug, proceed as follows:

-Connect Green and Yellow wire to terminal marked 'E' or or coloured Green and Yellow.

-Connect Brown wire to terminal marked 'L' or coloured red or brown.

-Connect Blue wire to terminal marked 'N' or coloured Black or Blue.

If a 13amp plug (BS 1363) is used it must be fitted with a 13amp fuse. A 15amp plug must be protected by a 15amp fuse, either in the plug or adaptor or at the distribution board.

If you are in any doubt about the electrical supply to your machine, consult a qualified electrician before use.

CE Marking certifies that this appliance conforms to the following EEC directives :

Low Voltage Equipment - 73/23/EEC & 93/68 EEC

Electromagnetic Compatibility 89/336/EEC, 92/31/EEC & 93/68/EEC

GB

4

Image 4
Contents Instructions for Installation and Use Contents Product Safety InstallationReplacement fuse covers Replacing fuse coversChanging the plug Removing the plug Disposing of the plugTemperature Control GET to Know Your ApplianceFreezing Getting Your Appliance Ready for USEFood Preservation Food Storage Meat and FishFruits and Vegetables Correct Temperature Settings Energy Saving TipsCaring for Your Appliance DefrostingTroubleshooting Green Light is offRed Light is always on Compressor runs continuouslyPage Page Genuine Parts and AccessoriesUK 08709 077 Repair Service and Information Help DeskExtended Warranties Guarantee terms and conditions Satisfaction guaranteed or your money backMachine or, if you prefer, give you your money back Repair Service and Information Desk Genuine Parts and Accessories

HUZ121 specifications

The Hotpoint HUZ121 is a leading appliance in the field of refrigeration, designed to cater to the diverse needs of modern kitchens. This under-counter refrigerator is particularly praised for its practical dimensions, making it a perfect fit for compact spaces while still offering ample storage capacity.

One of the standout features of the Hotpoint HUZ121 is its A+ energy efficiency rating. This ensures that users can enjoy lower energy bills while being eco-conscious. The fridge is designed to minimize energy consumption without sacrificing performance, making it an ideal choice for environmentally aware consumers.

The appliance comes with a generous capacity, providing ample room for groceries and stockpiling. It features adjustable shelves made of durable materials, allowing users to customize the internal layout based on their needs. The storage solutions, including a salad crisper drawer, help keep fruits and vegetables fresh for longer, promoting a healthier lifestyle.

In terms of cooling technologies, the Hotpoint HUZ121 incorporates a dynamic cooling system that evenly distributes cold air throughout the fridge, eliminating warm spots and ensuring that all food items are stored at an optimal temperature. This technology helps prolong the shelf life of perishables and maintain food quality.

Moreover, the appliance boasts a user-friendly interface, with an easy-to-understand temperature control system. This allows for precise adjustments according to various food storage requirements. The integrated LED lighting also enhances visibility inside the fridge, making it easier to find items even in low light conditions.

The Hotpoint HUZ121 is also designed with a reversible door hinge, providing flexibility in placement and installation. This feature allows users to modify the door swing direction, ensuring that it fits seamlessly into any kitchen layout.

Safety is another critical element in the design of the Hotpoint HUZ121. It includes a door alarm that alerts users if the fridge door has been left ajar, preventing unnecessary spoilage of food.

Overall, the Hotpoint HUZ121 combines modern technology with user-centric features, making it a reliable choice for compact refrigeration needs. Its energy efficiency, spacious layout, innovative cooling technology, and practical design elements make it a strong contender in the market, ideal for both small apartments and larger family kitchens.