Door Reversal
WARNING: Switch off electrical supply and pull out mains
plug.
If you need to change the door opening side, lower the appliance onto its back and follow the pictorial instructions below, in numerical order, to ensure doors function properly.
Note: You may require assistance to carefully lay the appliance onto it’s back, onto a suitable protective material (ie. the original packaging).
Insert the open door into the door bearing (A)
IMPORTANT: The door journal (B) must be in front of the door switch (C)
Changing the door handle
Follow the pictorial instruction below, in numerical order:
4
Attaching the base panel
The base panel (1) is enclosed with the appliance and can be found, either within the appliance itself or at the rear of the condenser (black grille).
●Slide the base panel (1) onto the plastic guides (2), until it locks into position.
Alternatively you may wish our Service Department to quote for an Engineer to carry out the conversion for you, call UK: 08709 066 066 or
Republic of Ireland: 1850 302 200