Hotpoint EDC51 manual Installation, Siting the Cooker

Page 5

Installation

Siting the Cooker

mm650 150 mm

150 mm

WARNING – THIS APPLIANCE MUST BE EARTHED.

Your cooker should have been checked to ensure that the voltage corresponds with your supply voltage, this is stated on the rating plate, which is situated on the front of the plinth. The cooker must be connected by a competent person eg. (NICEIC registered contractor) to suitable double-pole control unit with a minimum rating of 45A and a minimum contact clearance of 3mm, which should be fitted adjacent to the cooker, in accordance with IEE regulations.

The power supply cable should conform to B.S.6004 with a conductor size of 6mm2 minimum.

The control unit should be easily accessible in the event of an emergency, but must be within 2 metres of and not directly above an appliance.

This appliance conforms to EN 55014 regarding suppression of radio and television interference.

Access to the mains terminals is gained by removing the rear access cover.

The mains cable must pass through the cable clamp adjacent to the terminal block. Sufficient cable should be used to allow the cooker to be pulled out for servicing.

Ensure that the mains cable is routed away from any brackets affixed to the rear panel and is not trapped to the rear wall when pushing the cooker into position between cabinets.

The height of the cooker can be adjusted by means of adjustable feet in the plinth (900mm - 915mm). Adjust the feet by tilting the cooker from the side. Then install the product into position.

The cooker is designed to fit between kitchen cabinets spaced 500mm apart. The space either side need only be sufficient to allow withdrawal of the cooker for servicing. It can be used with cabinets one side or both as well as in a corner setting. It can also be used free-standing.

This cooker is a class X appliance, as such adjacent side walls which project above hob level, must not be nearer to the cooker than 150mm and should be protected by heat resistant material. Any overhanging surface or cooker hood should not be nearer 650mm.

Never mount the cooker onto a platform.

5

Page 4 Page 6
Image 5
Page 4 Page 6
Contents Instructions Page Contents Disposal of your product IntroductionSiting the Cooker InstallationMoving the Cooker Splash Panel Kit Wall Mounted Always For Your SafetySafety Advice For Your Safety Never Features EDC51 Control Panel When the appliance is not in useControl Knobs Only be rotated clockwise from the Off positionHotplates General Information Notes Hotplates General Information Notes All hobsAlways place pans Centrally on Hotplate But essentially FlatConvection Fan Mark Oven Temperature Conversion ChartNever line grill pan with foil GrillingGrill Pan Handle Fixing the Grill Pan Handle You may need to use oven gloves when removing warmed items Food Grill Setting Approximate Cooking time Grill ChartTop Oven/Grill Cookery Notes Time approx Position Meat Pre Meat PreTime approx Beef RareFood Main Oven Cookery Notes TemperatureOven Positions TimeFrozen Meat To prepare meat and poultry for roasting in your fan ovenSlow Setting Using the Main Oven for Other FunctionsCeramic hob Care and CleaningGrill Control panel Decorative trims Doors Ovens Oven liners Oven lamp replacementCooking Results Not Satisfactory? Problem Check GrillingOven Baking Top Oven BakingSomething Wrong with your Cooker? Problem CheckKey Contacts

EDC51 specifications

The Hotpoint EDC51 is a highly regarded tumble dryer known for its efficiency and user-friendly features. Designed to meet the demands of busy households, this appliance combines advanced technology with practical functionalities to ensure perfect drying results every time.

One of the main features of the Hotpoint EDC51 is its sizeable capacity. With a drum that accommodates up to 8 kg of laundry, it is perfect for families or individuals with significant laundry loads. This capacity allows for more significant savings in time and energy, reducing the number of drying cycles required.

The Hotpoint EDC51 utilizes a vented drying system that effectively expels humid air outside while drawing in fresh air. This system ensures that laundry dries quickly and efficiently, preventing the build-up of moisture in the home. Additionally, the appliance is equipped with several drying programs, including settings for cottons, synthetics, and delicates, allowing users to customize the drying process based on fabric type.

Another significant advantage of the Hotpoint EDC51 is its user-friendly interface. The rotary dial makes it easy to select the desired drying program, and an LED display provides helpful information regarding cycle duration and remaining time. This simplicity of operation is further enhanced by the inclusion of a reverse action feature, which helps to reduce tangling and ensure even drying results.

Energy efficiency is an essential consideration for many households today, and the Hotpoint EDC51 addresses this through its C energy rating. While not the highest on the market, it still promotes responsible energy use, helping to lower utility bills over time while maintaining effective performance.

The appliance also prioritizes safety and convenience. The door has been designed for ease of access, allowing users to load and unload the appliance without struggle. Moreover, the EDC51 features a fluff filter indicator that alerts users when it’s time to clean the filter, ensuring optimal performance and safety.

In conclusion, the Hotpoint EDC51 combines practicality with modern technology, making it a reliable choice for effective laundry care. Its ample capacity, varied drying programs, and user-centric features contribute significantly to its popularity, while its energy-efficient design makes it an environmentally conscious option. Whether dealing with everyday laundry or specific fabric needs, the Hotpoint EDC51 is well-equipped to handle any drying task.
Top Page Image Contents