Hotpoint RVM1425 owner manual Light Bulb Replacement, Cooktop Light, Oven Light, For replacements

Light Bulb Replacement

Cooktop Light

Replace with 40-watt tubular bulbs. Order WB36X936 from your Hotpoint supplier. Tubular 40-watt bulbs (40T6 1/2 /2), available in supermarkets and hardware stores, may also be used

for replacements.

1To replace the bulb(s), first disconnect the power at the main fuse or circuit breaker panel or pull the plug.

2Remove the screw at the front of the light cover and lower the cover.

3Be sure the bulb(s) to be replaced are cool before removing. After breaking the adhesive seal, remove the bulb by gently turning.

4Replace the screw. Connect electrical power to the oven.

REMOVE SCREWS

Oven Light

Replace the burned-out bulb with a 30-watt incandescent bulb (WB02X4235), available from your Hotpoint supplier.

1To replace the oven light, first disconnect the power at the main fuse or circuit breaker panel or pull the plug.

2Remove the top grille by taking out the 2 screws that hold it in place.

3Next, remove the screw located above the door near the center of the oven that secures the light housing.

4Replace the screw. Connect electrical power to the oven.

31