Hotpoint SBS51XS operating instructions Electrical Connection

Page 5

Electrical Connection

The electrical connection to the mains must be made on the appliance. The power voltage and frequency are as indicated on the rating plate.

!THIS APPLIANCE MUST BE EARTHED. Fitting the power supply cable

Unplug the appliance before all operations, even

when replacing the oven lamp.GB Using the appliance without correct earthing is highly dangerous.

!After connecting the appliance to the flexible cable, tighten all the screws on the terminal board.

APPLIANCE SPECIFICATIONS

Dimensions*

width 43.5 cm

height 32,4 cm

L

N

1.Open the terminal board by inserting a screwdriver into the side tabs of the cover. Use the screwdriver as a lever by pushing it down to open the cover (see diagram)

.

2.Install the power supply cable by loosening the cable clamp screw and the three wire contact screws

L-N-.

Connect the wires to the corresponding terminals: the Blue wire to the terminal marked (N), the Brown wire to the terminal marked (L) and the Yellow/Green wire

to the terminal marked (see diagram).

 

depth 41.5 cm

 

 

Volume*

59 l

 

 

Dimensions**

width 45.5 cm

height 32,4 cm

 

depth 41.5 cm

 

 

Volume**

62 l

 

 

Electrical

voltage: 230 - 240 V~ 50/60 Hz

(see data plate)

connections

maximum power absorbed

 

2250-2400 W

 

 

 

Directive 2002/40/EC on the label

 

of electric ovens. Standard EN 50304

ENERGY

Energy consumption for Natural

LABEL

convection - heating mode:

 

Convection mode

 

Declared energy consumption for

 

Forced convection Class - heating

 

mode:

 

Multi-cooking

3.Secure the cable by fastening the clamp screw.

4.Close the cover of the terminal board.

Electrical Connection:

Voltage Frequency: see data plate

Fuse Section: 16A

Supply cable: 3x1.5mm2

You can connect your oven to the system means of a terminal board. Refer to above information for the minimal cable sections and the calibration of the protective elements according to the connection.

If the appliance is installed with a junction box, an omnipolar circuit breaker - with a minimum contact opening of 3mm - should be installed between the appliance and the mains.

Power cable supply connection to the electrical mains:

We recommend you use a power supply cable which is long enough to allow you to take the oven out of its recess in the event of maintenance operations (only use HAR - H 05 - RRF quality cables fitted with a plug conforming to the regulations in force.

The plug must be accessible at all times.

This appliance conforms to the

following European Economic

Community directives:

- 2006/95/EEC of 12/12/06 (Low

Voltage) and subsequent

amendments;

- 2004/108/EEC of 15/12/04

(Electromagnetic Compatibility) and

subsequent amendments;

- 93/68/EEC of 22/07/93 and

subsequent amendments.

-2002/96/EC and subsequent amendments.

*Only for models with drawn rails.

**Only for models with wire rails.

PLEASE PHONE US TO REGISTER YOUR APPLIANCE AND ACTIVATE YOUR PARTS GUARANTEE ON 08448 24 24 24

5

Page 4 Page 6
Image 5
Page 4 Page 6
Contents Operating Instructions OVENContentsGB Warnings Overall view Description of the applianceControl panel Control panelPositioning GB InstallationElectrical Connection Electrical ConnectionGB Start-up and use How to use the timerModes Starting the ovenGratin mode Practical cooking adviceCooking advice table Maintenance and care Precautions and tipsInspecting the seals Cleaning the oven doorReplacing the light bulb Hotpoint Service Afetr Sales ServiceParts and Accessories Essential Contact InformationGB Guarantee

SBS51XS specifications

The Hotpoint SBS51XS is a stylish and functional side-by-side refrigerator designed to meet the needs of modern households. As a part of Hotpoint's commitment to innovation and reliability, the SBS51XS combines spacious storage capacity with advanced cooling technologies to ensure food freshness and convenience.

One of the standout features of the SBS51XS is its generous storage capacity. With a total net volume of around 525 liters, this refrigerator offers ample space to store groceries, beverages, and frozen items. The interior is designed with adjustable shelving and door storage bins, allowing users to customize the layout according to their needs. The refrigerator compartment is equipped with a dedicated fruit and vegetable drawer, which helps maintain optimal humidity levels, preserving the freshness of produce for longer periods.

The SBS51XS utilizes advanced cooling technology for efficient temperature management. The No Frost system prevents the build-up of ice, eliminating the need for manual defrosting. This feature also helps maintain even cooling throughout the refrigerator, ensuring that all items are kept at the ideal temperature. Additionally, the multi-air flow system distributes cold air evenly, preventing temperature fluctuations and keeping food fresher for longer.

In terms of energy efficiency, the Hotpoint SBS51XS boasts a favorable energy rating, helping households reduce electricity consumption and costs. The inverter compressor technology further enhances efficiency by adjusting the cooling output based on the contents of the fridge, minimizing energy waste without sacrificing performance.

The exterior of the SBS51XS is sleek and modern, featuring a stainless steel finish that complements any kitchen decor. The integrated water and ice dispenser adds convenience, providing chilled water and ice cubes on demand. With user-friendly controls located on the front panel, adjusting settings is easy and intuitive.

Safety features include a child lock and, for peace of mind, a door alarm that alerts users when the door is left open for an extended period. Overall, the Hotpoint SBS51XS is an excellent choice for families seeking a high-capacity refrigerator that combines cutting-edge technology with contemporary design, ensuring both practicality and style in the kitchen.
Top Page Image Contents