Denon AVR-4800 manual Multi-source and multi-zone playback, Multi Room Music Entertainment System

Page 45

Multi-source and multi-zone playback

MULTI ROOM MUSIC ENTERTAINMENT SYSTEM

•When the outputs of the MULTI SOURCE AUDIO OUT terminals are wired and connected to integrated amplifiers installed in other rooms, different sources can be played in rooms other than the main room in which this unit and the playback devices are installed. (Refer to ANOTHER ROOM on the diagram below.)

•When a sold separately room-to-room remote control unit (DENON RC-616, 617 or 618) is wired and connected between the main room and another room, the remote-controllable devices in the main room can be controlled from another room using the remote control unit.

To control playback devices other than the ones above, either use that device’s remote control unit or preset a separately sold programmable remote control unit.

NOTES:

•For the AUDIO output, use high quality pin-plug cords and wire in such a way that there is no humming or noise.

•For instructions on installation and operation of separately sold devices, refer to the devices’ operating instructions.

MULTI ROOM MUSIC ENTERTAINMENT SYSTEM

ANOTHER ROOM

MAIN ROOM

 

 

 

RC-617

INTEGRATED

 

AMPLIFIER

 

PROGRAMMABLE

AVR-4800

REMOTE

 

CONTROL UNIT

 

 

 

 

 

SYSTEM REMOTE

RC-616

 

 

 

 

CONTROL UNIT RC-869

 

 

 

ROOM-TO-ROOM REMOTE CONTROL SYSTEM (separately sold) control line

MULTI SOURCE AUDIO signal cable

SPEAKER cable

Refer to CONNECTIONS on pages 6 to 15.

Room to Room Remote Control jacks

•When the OUT jack is connected, the signals input to the IN jack are output from the OUT jack directly. (Example: RC616 signals are output.)

•Do not connect only the OUT jack.

(The signals from the AVR-4800’s remote sensor are not output to this jack.)

45

Page 44 Page 46
Image 45
Page 44 Page 46
Contents AVR-4800 Safety Precautions Safety Instructions Before Using Table of ContentsFeatures Connections Connecting the audio componentsConnecting video components Precaution when using S-jacks Connecting a video component equipped with S-Video jacksConnecting a monitor TV Connecting the video decksMonitor OUT jack Connecting a DVD player DVD in jacksConnecting the antenna terminals AM loop antenna assembly FM antenna adapter assemblyConnection of AM antennas Connecting the Multi Source jacks Connecting the external input EXT. in jacksSpeaker system connections Connecting the speaker cordsSpeaker Impedance ConnectionsWhen using a power amplifier for the surround back channel Connections when using surround back speakersRemote ON-OFF Protector circuit Part Names and Functions @4Input source indicatorsFront Panel @6Display+10 Remote control unitSystem Setup button Setting UP the SystemSurround Parameter button Enter buttonSurround speaker selector function Speaker system layoutSetting the type of speakers Before setting up the systemEnter the setting Setting the Subwoofer modeSystem Setup Menu reappears ParametersSetting Setting the THX Surround EXPreparations Setting the delay timeSetting the Power Amp Assignment Setting the channel level 1spkr FL C FR SR SBR SBL SL SW Flashing 2spkrs Subwoofer peak limit level setting Volume control is at a high levelAVR-4800 automatically sets the subwoofer peak limit level Setting the Digital In Assignment To select the input sourceTo select the digital input jack Setting the on-screen display OSD Auto tuner presetsSelect on or OFF On-screen display signals After completing system setupRemote Control Unit Using the remote control unitInserting the batteries Operating Denon audio components Set mode switch 2 to the position for the component to beOperated Tuner system buttonsPreset memory VCR Set the slide switch to the component to be registered Operating a video component stored in the preset memoryDVD, VDP, VCR or TV Operate the video componentLearning function Using the system call function System call functionSystem call buttons Clearing system call settings Storing signalsClearing learned remote control signals OperationBefore operating Input mode selection function Playing the input sourceExample CD Listening over headphones Adjusting the sound quality toneAfter starting playback Example StereoSwitching the surround speakers Turning the sound off temporarily mutingChecking the currently playing program source, etc Multi-source recording/playback Playing one source while recording another REC OUT modePlayback using the external input EXT. in jacks Multi Room Music Entertainment System Multi-source and multi-zone playbackBefore playing with the surround function SurroundFader function THX Surround EX / Home THX Cinema mode This mode is optimized for playing 5.1-channel moviesPlaying modes for different sources Surround Back indicator lights green Select the Home THX Cinema modeContains Low Frequency Effect sounds Surround parameters q THX Surround EXSelect the Dolby Surround mode Set the input mode to AutoDolby Digital indicator Lights when When the source is played Input channelCOMP. Dynamic Range Compression Surround parameters w Cinema EQ. Cinema Equalizer7.1 Surround Dialogue NormalizationDolby Surround Pro Logic mode Surround modes and their features Denon Original Surround ModesPersonal Memory Plus DSP surround simulation Select the surround mode for the input channelSet the parameters Unit’s panelTone control setting Surround modes and parameters Surround parameters eAuto tuning Manual tuningListening to the Radio Checking the preset stations Recalling preset stations Last Function MemoryInitialization of the Microprocessor Troubleshooting Additional Information Types of multi-channel signalsOptimum surround sound for different sources Movie audioNumber of surround back speakers Surround back speakersSpeaker setting examples When not using surround back speakers When using different surround speakers for movies and musicDolby Surround Dolby Digital Dolby Surround AC-3 SurroundDolby Digital and Dolby Pro Logic Dolby Digital compatible media and playback methodsDolby Pro Logic DTS Digital SurroundDolby Pro Logic compatible media and playback methods DTS compatible media and playback methodsTHX Surround EX Home THX Cinema surround modeSurround modes and parameters Audio section Power amplifier Rated output Specifications

AVR-4800 specifications

The Denon AVR-4800 is a high-performance home theater receiver that has left a lasting impact on audiophiles and home entertainment enthusiasts since its launch. A product of Denon's legacy in audio technology, the AVR-4800 caters to individuals who seek an immersive listening experience while enjoying their favorite movies, music, and gaming.

One of the standout features of the Denon AVR-4800 is its powerful multi-channel amplification. The receiver supports an impressive configuration of up to 7.1 channels, delivering a total output of 100 watts per channel. This level of amplification ensures that even the most demanding audio tracks are delivered with clarity and depth, creating an enchanting surround sound environment. The ability to connect various speakers allows for a customizable sound setup, catering to the needs of diverse home theater configurations.

The AVR-4800 supports several audio formats and technologies, including Dolby Digital, DTS, and Dolby Pro Logic II. This compatibility allows users to experience high-quality sound reproduction across various media formats, whether they are watching a blockbuster movie or listening to their favorite music. With a comprehensive suite of surround sound processing options, the receiver ensures an immersive audio experience that draws listeners into the action.

Furthermore, the AVR-4800 features Denon's proprietary AL24 processing, which enhances the audio signal by providing wider dynamic ranges and reduced distortion. This technology captures nuanced details in music and film soundtracks, resulting in a richer and more engaging listening experience. The inclusion of digital signal processing and tone controls allows users to tailor the sound according to their preferences, ensuring that every user can achieve their ideal audio setup.

The AVR-4800 also includes a range of connectivity options. It boasts multiple analog and digital inputs, allowing users to connect various devices, such as Blu-ray players, gaming consoles, and streaming devices. The receiver features video scaling capabilities, enabling it to upscale standard-definition video to high-definition output for better picture quality while watching films or shows.

Overall, the Denon AVR-4800 combines advanced audio technologies, impressive amplification, and versatile connectivity to provide an exceptional home theater experience. Its commitment to sound quality and user-friendly features make it a notable choice for anyone looking to elevate their entertainment setup. Whether you're a casual viewer or a serious audiophile, the AVR-4800 promises to deliver an auditory experience that is nothing short of mesmerizing.
Top Page Image Contents