GB Start-up and use, Control panel lock

GB Start-up and use

WARNING! The oven is provided with a stop system to extract the racks and prevent them from coming out of the oven (1).

As shown in the drawing, to extract them completely, simply lift the racks, holding them on the front part, and pull (2).

!The first time you use your appliance, heat the empty oven with its door closed at its maximum temperature for at least half an hour. Make sure that the room is well ventilated before switching the oven off and opening the oven door. The appliance may emit a slightly unpleasant odour caused by protective substances used during the manufacturing process burning away.

! To make the setting process easier, press and hold the and buttons to scroll through the numbers on the display rapidly.

!Each setting will automatically be stored in the appliance memory after 10 seconds.

!The touch controls cannot be activated if the user is wearing gloves.

!In order to optimise the cooking performance, when starting the selected function, product settings will be applied that could cause a delayed start of the fan and heating elements.

Control panel lock

!The control panel can be locked while the oven is off, once cooking has started or finished and during programming.

To lock the oven controls, press and hold the button for at least 2 seconds. A buzzer will sound and the TEMPERATURE display shows the

key symbol “O—n”. The	icon will light up to indicate lock activation.
To deactivate the lock, press and hold the		button again for at least 2
seconds.

Setting the clock

!The clock can only be set when the oven is switched off. If the oven is in

standby mode, pressing the			button once will display the current time
setting. Press it again to set the time.
After connection to the power supply network or after
a blackout, the		button and the digits on the TIME display will flash for
10 seconds.
To set the clock:
1.	Press the	button.
2. Adjust the hour figure using the			and	buttons.

3.	Once you have reached the correct hour value, press the				button.
4.	Repeat the above process to set the minutes.
If a blackout occurs, it will be necessary to reset the clock. If the					icon

flashes on the display, this indicates that the clock has not been set correctly.

Setting the minute minder

!The minute minder may be set regardless of whether the oven is switched on or off. It does not switch the oven on or off.

When the set time has elapsed, the timer emits a buzzer that will automatically stop after 30 seconds or when any active button on the control panel is pressed.

To adjust the timer proceed as follows:

1. Press button


2.	Set the desired time using buttons and			.

3.	Once you have reached the desired value, press the				button again.
The lit		symbol will remind you that the minute minder is on.
To cancel the minute minder, press the			button and use the and

buttons to set the time to 00:00. Press button				again.
The		icon will switch off to indicate that the minute minder has been
disabled.

Starting the oven

1. Switch the control panel on by pressing the button. The appliance buzzer sounds three times (ascending) and all buttons light up in sequence. 2. Press the button corresponding to the desired cooking mode. The TEMPERATURE display shows:

- the temperature associated with the mode, if programming manually; - “Auto”, if programming is automatic.

The TIME display shows:

- the current time, if programming manually; - the duration, if programming is automatic.

3. Press the

button to begin cooking.

4. The oven will begin its preheating phase, the preheating indicators will light up as the temperature rises.

5. When the preheating process has finished, a buzzer sounds and all the preheating indicator lights show that this stage has been completed: the food can then be placed in the oven.

6. During cooking it is always possible to:

- change the temperature by pressing the

button, followed by the and

buttons (manual modes only);

-set the duration of a cooking mode (see Cooking Modes);

-press thebutton to stop cooking. In this case the appliance stores the temperature modified previously in its memory (manual modes only);

- switch off the oven by pressing the

button for 3 seconds.

7.If a blackout occurs while the oven is already in operation, an automatic system within the appliance will reactivate the cooking mode from the point at which it was interrupted, provided that the temperature has not dropped below a certain level. Programmed cooking modes which have not yet started will not be restored and must be reprogrammed (for example: a cooking mode has been programmed to start at 20:30.At 19:30 a blackout occurs. When the power supply is restored, the mode will have to be reprogrammed).

!There is no preheating stage for the GRILL mode.

!Never put objects directly on the bottom of the oven; this will prevent the enamel coating from being damaged.

!Always place cookware on the rack(s) provided.

Cooling ventilation

In order to cool down the external temperature of the oven, a cooling fan blows a stream of air between the control panel and the oven door, as well as towards the bottom of the oven door.

At the beginning of the FAST CLEAN mode, the cooling fan operates at low speed.

!Once cooking has been completed, the cooling fan continues to operate until the oven has cooled down sufficiently.

PLEASE PHONE US TO REGISTER YOUR APPLIANCE AND ACTIVATE YOUR PARTS GUARANTEE ON 08448 24 24 24

KSO103PX S, SH103PX S specifications

The Hotpoint SH103PX S and KSO103PX S are modern kitchen appliances that combine style, functionality, and innovative technology to enhance your cooking experience. Both models are designed with user convenience in mind while providing excellent performance.

The SH103PX S, a built-in single electric oven, offers a sleek stainless-steel finish that complements any contemporary kitchen design. One of its main features is the spacious cavity with a 71-litre capacity, providing ample space for cooking multiple dishes simultaneously. This oven is equipped with a range of cooking functions, including fan-assisted cooking, conventional cooking, and grill settings, allowing for versatility in meal preparation. The fan-assisted cooking function ensures even heat distribution, resulting in consistently cooked meals every time.

On the other hand, the KSO103PX S is an elegant toaster that caters to those who love a crisp and perfectly toasted slice of bread. This model boasts four wide slots, accommodating various bread types, from artisanal loaves to bagels. The KSO103PX S features multiple browning settings, enabling users to select their preferred level of toasting, whether it be lightly golden or extra crispy. The canceled function allows for immediate stopping of the toasting, adding to its user-friendly design.

Both models incorporate advanced technologies aimed at enhancing performance and energy efficiency. The SH103PX S features a self-cleaning function that utilizes pyrolytic cleaning technology, turning food residues into ash that can be easily wiped away. This saves the user time and effort, making oven maintenance much simpler.

Energy efficiency is a hallmark of the Hotpoint brand, and both the SH103PX S and KSO103PX S reflect this commitment. The appliances are designed to operate with minimal energy consumption without compromising performance, which is beneficial for environmentally-conscious consumers.

Overall, the Hotpoint SH103PX S and KSO103PX S stand out with their combination of elegant design, functional features, and technological innovations. These appliances are perfect for individuals and families looking to streamline their cooking and toasting processes while ensuring satisfying results every time. With these models, Hotpoint continues to deliver quality and efficiency, making them excellent additions to any modern kitchen.