Hotpoint ux892cx manual General, Final Installation

Page 5

Installation

Electrical Requirements

GB For your own safety, we recommend that your cooker is installed by a competent person such as one who is registered with NICEIC (National Inspection Council for Electrical Installation Contracting). The cooker should be installed in accordance with the latest edition of the IEE Regulations.

Warning: This appliance must be earthed.

Electrical Connections

The installer must check that the voltage shown on the rating plate corresponds with the house electricity supply. The cooker must be supplied via a suitable double pole isolating switch, having a contact separation of at least 3mm in all poles placed in a readily accessible position adjacent to the cooker. If the cooker is to be wired into a connector unit, this may be positioned behind the cooker providing the following requirements are met:

i)The connector unit must not project from the wall more than 25mm.

ii)The top of the connector must not be more than

130mm above floor level.

Remove the terminal cover at the rear base of the cooker. Pass the cable through the cable clamp and connect to the appropriate terminals provided. Allow sufficient cable for any future servicing. Tighten the screws on the cable clamp and replace the cover. Make main connections in the connector unit or cooker control unit. This appliance conforms to B.S. EN 55014 regarding suppression of Radio and Television reception interference.

A double Pole control switch having a minimum rating of 32 amps should be used to feed the cooker using a suitably rated cable. Where a hob is fitted adjacent to or over the cooker, a 45 amp Double Pole control switch should be used to feed both units via separate suitably rated cables.

We recommend a minimum of 4mm2 PVC insulated twin and earth cable conforming to B.S. 6004 for connection of each appliance.

In all cases adhere to routing details (see fig. 5).

This appliance must not be installed over any other appliance that generates heat such as a plinth heater.

Note: Due to many different types of installation, a mains cable is not supplied with this product. The installer will fit the correct type and length of cable.

GENERAL

The appliance is designed to be mounted on a floor between two adjacent cabinets.

The cabinets must be securely fixed to the wall and the cooker securely fixed to the cabinets.

This cooker must not be used free standing. Note; This cooker must not be fitted on a platform.

FINAL INSTALLATION

a. Ensure that the adjacent cabinets and the gap between them have dimensions in accordance with the diagram.

b. Assemble the plastic plugs provided into the fixing brackets. See diagram.

c. Fix the fixing brackets to the sides of the adjacent cabinets so that the centre line of the brackets are 570mm above the top of the plinth line and the front face of the plastic plug is level with the front face of the cabinet sides. See diagram.

d. Adjust the feet on the cooker to their minimum position, i.e. fully screwed in.

e. Slide the cooker centrally into the space between the cabinets ensuring the following:

i)The gap between the cabinet sides and the cooker is even along the length of the cabinet sides.

ii)The cable is routed away from any vents in the rear panel and is not trapped between the cooker

and the wall, adjacent cabinets or under the feet f. Adjust the feet using an open ended spanner until the bottom of the cooker door is in line with the top of the plinth. Using a spirit level, check that the

cooker is level in all directions.

g. Check that the plinth can be fitted. If necessary re

-adjust the feet and check that the cooker is level. Then lock the feet into position by tightening the lock nut using an open ended spanner.

h. Open the top oven door and fix the cooker to the brackets through the holes in the side trims.

i. Fix the plinth in position.

j. Ensure that there is a minimum gap of 1mm between the cooker side trim and the adjacent cabinet doors or drawer fronts.

k. If a hob is to be installed directly above the cooker it must not project downwards more than 20mm below the underside of the work top. Any projection of more than 10mm must not project more than 500mm from the wall.

Fig. 5

PLEASE PHONE US TO REGISTER YOUR APPLIANCE AND ACTIVATE YOUR PARTS GUARANTEE ON 08448 24 24 24

5

Page 4 Page 6
Image 5
Page 4 Page 6
Contents UX 892 CX Instructions for Installation and UseIntroduction To the InstallerTo the User Retention of this Instruction BookSafetyInformation Always Turn OFF the Cooker Appliance AT the Wall SwitchNever Leave the PAN to Cool for AT Least 60 MinutesGeneral InstallationFinal Installation Installation Top View Overall view Control panel Main parts of your DoubleOvenDisplay KnobSetting the minute minder Setting the clockStart-upanduse Control panel lockResidual heat indicators Restoring the factory settingsStandby Cooling ventilationAutomatic cooking modes Manual cooking modesRoast Meat mode Fish modeSetting the end time for a cooking mode Practical cooking adviceProgramming cooking Programming the cooking durationThis will cause overheating SolarplusGrillUsing the grill pan kit Platewarming in the top oven To use the oven proceed as followsDo not place food or dishes on the floor Oven.GB TopOvenTemperature Charts-Meat TopOvenTemperature Charts-Baking Telescopic runners and Meat pan Cooking temperature rangesAutomatic Cooking Functions Cooking Advice TableMainOven-TheIntelligentCooking System TemperatureConversionChart How Stayclean works Care and CleaningCleaning Base & Rear of Top Oven and Base of Main OvenInner Door Panels & Glass Control PanelDrop Down Doors Cleaning the DoorsGB There MAY be Nothing Wrong If something Goes wrongDisposal of old electrical appliances Disposal of your productGuarantee is subject to the following conditions Months Parts and Labour GuaranteeGuarantee does not cover Year Parts GuaranteeUK 08448 24 24 Republic of Ireland 01 230 Hotpoint ServiceParts & Accessories

ux892cx specifications

The Hotpoint UX892CX stands out in the realm of modern kitchen appliances, particularly known for its robust design and multifunctional capabilities. This built-in microwave oven is engineered to cater to a wide array of cooking preferences, making it an invaluable asset for both professional chefs and home cooks alike.

One of the key features of the Hotpoint UX892CX is its extensive cooking functions, which include microwave, grill, and convection options. This versatility allows users to not only reheat leftovers but also create gourmet meals from scratch. The grill function is perfect for achieving a crispy finish on meats and vegetables, while the convection feature ensures even heat distribution for optimal baking results.

The UX892CX is equipped with a user-friendly digital display and intuitive controls. This simplifies the cooking process, allowing users to easily navigate between various settings and functions. The LED display provides clear visibility, even in low-light conditions, ensuring that cooking times and settings are easily adjustable with just a few button presses.

Another standout characteristic of this appliance is its generous capacity. With a spacious interior, the UX892CX allows for the cooking of larger dishes, making it ideal for families or those who love to entertain. This is complemented by a turntable that promotes even heating, ensuring that food is cooked uniformly.

One of the most appealing technologies in the Hotpoint UX892CX is its eco-friendly feature. The energy-saving modes are designed to minimize electricity usage without compromising on performance, aligning with contemporary sustainability efforts. This aspect not only benefits the environment but also reduces monthly energy bills.

In terms of design, the UX892CX boasts a sleek and modern aesthetic that can seamlessly integrate into any kitchen décor. Its stainless-steel finish not only enhances its visual appeal but is also easy to clean, ensuring that the appliance remains in pristine condition over time.

Overall, the Hotpoint UX892CX is a well-rounded built-in microwave that combines advanced cooking technologies with thoughtful design elements. Its versatility, ease of use, and commitment to energy efficiency make it a preferred choice for anyone looking to elevate their cooking experience. Whether preparing a quick snack or a full-course meal, this appliance delivers performance and convenience, truly embodying the ethos of modern kitchen innovation.
Top Page Image Contents