Hotpoint E6014, E6011 manual Installation and fastening, Fastening

Page 5

Installation and fastening

The following instructions are intended for a qualified fitter to guide him/her along the installation, adjustment and tech- nical maintenance procedures as correctly as possible and in full compliance with the applicable norms in force.

Important : unplug the hob before all operations.

Installation

•This hob can be built into a worktop simply by cut- ting out the corresponding slot.

•The worktop must be made with a material designed to withstand a temperature of approximately 100°C.

•The hob should be positioned at least 40 mm (for mod:KBM 6011DH - KBM 6001 H the hob should be positioned at least 55 mm) away from the back wall or any other vertical surface in order to allow for correct ventilation and to prevent the surfaces around the ap- pliance from overheating.

•If you wish to install the hob on top of an oven, the latter must be fitted with a cooling fan.

•Try to avoid installing the hob on top of a dishwasher; if this is unavoidable, place a watertight separating el- ement between the two appliances.

Fastening

Very important: It is vital that you ensure the glass ce- ramic hob is built into a perfectly flat supporting surface. Deformations due to improper fastening could alter the characteristics of the hob and compromise its perform- ance.

The fastening springs are fastened by screws (see dia- gram).

It is vital that these screws be kept accessible at all times.

Insert the hob into the cut-out slot, applying pressure all along the perimeter of the hob frame so that the latter adheres fully to the worktop.

REAR SPRING ASSEMBLY

FRONT OF HOB

KITCHEN

30

 

40

WORKTOP

 

 

 

 

 

 

 

 

 

 

 

 

48

560

+/-

 

 

1

574

 

10

 

504

 

1

 

-

490

+/

 

Distance to keep between the cut-out slot and

the cabinet

HOB FROM BELOW

5

Page 4 Page 6
Image 5
Page 4 Page 6
Contents Electric Hobs Models E6011-E6014 Instructions for Installation and UseContents Introduction Advice and recommendations Fastening Installation and fasteningInstallation For example line 1 in the table Electrical connectionDescription of the cooktop and cooking zone DescriptionDescription of the heating elements Different functions of the hobAdvice on using your appliance Maintenance and careHob care RecommendationsRepair Service and Information Help Desk After Sales ServiceGenuine Parts and AccessoriesUK 08709 077 Extended WarrantiesSatisfaction guaranteed or your money back GuaranteeGuarantee terms and conditions Recycling & Disposal InformationKey Contacts Repair Service and Information DeskGenuine Parts and Accessories

E6014, E6011 specifications

The Hotpoint E6011 and E6014 are part of a series of high-performance electric cookers designed to cater to modern kitchens with their sleek design and advanced features. These cookers stand out for their reliable performance, making them ideal for both avid cooks and busy households.

One of the key features of the Hotpoint E6011 and E6014 is their versatile cooking capabilities, thanks to the inclusion of multiple cooking zones. With a combination of rapid heat-up burners and traditional burners, they provide flexibility for various cooking methods, from simmering to boiling and frying. This allows users to efficiently prepare multiple dishes simultaneously.

Both models come with an energy-efficient fan oven that ensures even heat distribution while cooking. This feature guarantees that food is evenly cooked on all levels, significantly improving the overall cooking experience. The fan oven technology not only saves time but also energy, making these cookers sustainable choices for environmentally conscious consumers.

In addition to their baking and roasting capabilities, the Hotpoint E6011 and E6014 are equipped with a built-in grill function. This feature is perfect for quickly cooking meats and vegetables while providing a deliciously charred finish. The grill also comes with adjustable settings, giving users greater control over cooking intensity.

Another highlight of the Hotpoint E6011 and E6014 is the user-friendly interface. Featuring intuitive controls and well-placed knobs, these cookers facilitate easy operation, even for those who are not experienced in the kitchen. The clear visual indicators help users gauge heat levels and cooking times, ensuring consistent results.

The design of these cookers is also worth noting. With a modern stainless-steel finish, they seamlessly integrate into contemporary kitchen aesthetics. Their compact size makes them suitable for smaller kitchens without compromising on functionality.

Lastly, both models prioritize safety with features such as a flame failure device that automatically cuts off gas flow if the flame goes out. This provides peace of mind for users and enhances kitchen safety.

In summary, the Hotpoint E6011 and E6014 are built for efficiency, versatility, and style. With features like multiple cooking zones, energy-efficient fan ovens, and user-friendly controls, these electric cookers are excellent investments for any kitchen.
Top Page Image Contents