Hotpoint SX 896L PX manual Electrical connection, Fitting the power supply cable

Page 3

Electrical connection

!Ovens equipped with a three-pole power supply cable are designed to operate with alternating current at the voltage and frequency indicated on the data plate located on the appliance (see below).

Fitting the power supply cable

1. Open the terminal board by inserting a screwdriver into the side tabs of the cover. Use the screwdriver as a lever by pushing it down to open the cover (see diagram).

2. Loosen the cable clamp screw and remove it, using a screwdriver as a lever (see figure).

3. Remove the wire

contact screws L-N- ,

then fasten the wires

under the screw heads, observing the colour

code: Blue (N), Brown (L) and Yellow-Green ().

Connecting the electricity supply cable to the mains

Install a standardised plug corresponding to the load indicated on the data plate (see table). The appliance must be directly connected to the mains using an omnipolar switch with a minimum contact opening of 3 mm installed between the appliance and the mains. The switch must be suitable for the charge indicated and must comply with current electrical regulations (the earthing wire must not be interrupted by the switch). The supply cable must be positioned so that it does not come into contact with temperatures higher than 50°C at any point (the back panel of the oven, for example).

!The installer must ensure that the correct electrical connection has been performed and that it is fully compliant with safety regulations.

Before connecting the appliance to the power supply, make sure that:

• the appliance is earthed and the plug is compliant

with the law;

GB

 

•the socket can withstand the maximum power of the appliance, which is indicated on the data plate (see below);

•the voltage is in the range between the values indicated on the data plate (see below);

•the socket is compatible with the plug of the appliance. If the socket is incompatible with the plug, ask an authorised technician to replace it. Do not use extension cords or multiple sockets.

!Once the appliance has been installed, the power supply cable and the electrical socket must be easily accessible.

!The cable must not be bent or compressed.

!The cable must be checked regularly and replaced by authorised technicians only (see Assistance).

!The manufacturer declines any liability should these safety measures not be observed.

APPLIANCE SPECIFICATIONS

Dimensions

width 43.5 cm

height 32 cm

 

 

 

 

 

 

 

 

 

 

 

 

depth 41.5 cm

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

Volume

58 l

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

Electrical

voltage: 230 - 240 V~ 50/60 Hz

(see data plate)

connections

maximum power absorbed

 

 

 

 

 

 

 

 

 

 

 

 

2800-3000 W

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

Directive 2002/40/EC on the label

 

 

 

 

 

 

 

 

 

 

 

 

of electric ovens. Standard EN 50304

ENERGY

Declared energy consumption

LABEL*

for Forced convection Class –

 

 

 

 

 

 

 

 

 

 

 

 

heating mode:

 

 

 

 

 

 

 

 

 

 

 

 

ECO.

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

* Without removable guide rails

PLEASE PHONE US TO REGISTER YOUR APPLIANCE AND ACTIVATE YOUR PARTS GUARANTEE ON 08448 24 24 24

3

Page 2 Page 4
Image 3
Page 2 Page 4
Contents Oven Operating InstructionsInstallation Fitting the power supply cable Connecting the electricity supply cable to the mainsElectrical connection Display Description of the applianceOverall view Control panelControl panel/door lock Setting the clockSetting the minute minder Start-up and useCooling ventilation Restoring the factory settingsResidual heat indicators StandbyModes Manual cooking modesAutomatic cooking modes Baked Cakes mode Bread modeRecipe for Bread Programming the cooking duration Practical cooking adviceSetting the end time for a cooking mode Programming cookingCooking advice table Respecting and conserving the environment Precautions and tipsGeneral safety DisposalCare and maintenance Automatic cleaning with the Fast Clean function Safety devicesProgramming the automatic cleaning end time Once the automatic cleaning cycle is over Problem Possible cause Solution TroubleshootingHotpoint Service Parts and AccessoriesAppliance Registration Free Helpdesk Service Months Parts and Labour GuaranteeYear Parts Guarantee Extended GuaranteesPage Page Xerox Fabriano

SX 896L PX specifications

The Hotpoint SX 896L PX is a stylish and versatile appliance designed to meet the needs of modern kitchens. This spacious refrigerator combines innovative technologies and practical features, making it an ideal choice for families and culinary enthusiasts alike.

One of the standout features of the Hotpoint SX 896L PX is its extensive storage capacity. With a net capacity of approximately 600 liters, it provides ample space for groceries, leftovers, and beverages. The interior is thoughtfully designed with adjustable shelves, offering flexibility to accommodate various items of different sizes.

The cooling system is powered by No Frost technology, which prevents ice build-up and eliminates the need for manual defrosting. This ensures consistent temperatures and optimal food preservation, reducing waste and keeping your items fresher for longer. In addition, it incorporates a Multi Air Flow system that enhances air circulation throughout the refrigerator, maintaining even temperatures and helping to preserve the quality of your food.

For those who prioritize energy efficiency, the Hotpoint SX 896L PX is an excellent choice. It comes with an A++ energy rating, which signifies low energy consumption and cost savings. This not only contributes to a reduced carbon footprint but also offers long-term economic benefits for your household.

The appliance includes advanced cooling technologies such as Fresh Zone and Hygiene+ features. The Fresh Zone compartment is designed to store sensitive items like fruits and vegetables, maintaining optimal humidity levels to prolong their freshness. Meanwhile, the Hygiene+ system utilizes an antibacterial coating to reduce bacterial growth, enhancing food safety and hygiene.

Additionally, the Hotpoint SX 896L PX boasts a user-friendly electronic control system with LED display, allowing for easy temperature adjustments and settings. The interior lighting is bright and energy-efficient, making it easy to locate items even in low-light conditions.

Aesthetically, the stainless steel finish gives the Hotpoint SX 896L PX a sleek and modern appearance, easily fitting into any kitchen décor. The handle design is ergonomic yet stylish, offering both functionality and elegance.

Overall, the Hotpoint SX 896L PX stands out as a reliable and feature-rich refrigerator that prioritizes performance, energy efficiency, and user convenience. Its cutting-edge technologies and spacious design make it an excellent investment for any household, ensuring fresh and well-preserved food for all your culinary needs.
Top Page Image Contents