Electrical Connection

WARNING - THIS APPLIANCE MUST BE EARTHED. CONNECT TO A 230-240V A.C. SUPPLY ONLY.

Connection to the electricity supply should be made via a properly earthed, readily accessible wall socket which is adjacent to but not directly above, and not more than 1.25m away from the appliance and capable of electrical isolation.

The mains lead should be routed such that it cannot touch hot parts of the cooker i.e. the back panel above a height of 650mm from the floor.

Should this plug not fit the socket outlet in your home it should be cut off and replaced with a suitable plug as outlined below.

NOTE: The removed plug cannot be used for any other appliance and should therefore be properly disposed of and not left where children might find it and plug it into a supply socket - with the obvious consequent danger.

IF THE FITTED PLUG IS REMOVED

The flexible mains lead must be correctly connected as below to a three pin plug of not less than 13 amp capacity. If a B.S. 1363 fused plug is used, it must be fitted with a fuse which is approved to B.S. 1362.

IMPORTANT: The wires in the mains lead fitted to this appliance are coloured in accordance with the following code:

GREEN AND YELLOW	- EARTH
BLUE	- NEUTRAL
BROWN	- LIVE

	Green &
	Yellow to
	Earth
	Brown
	to Live
Blue to	13 Amp
Neutral	Fuse
Cord
Clamp

As the colours of the wires in the mains lead of this appliance may not correspond with the coloured markings identifying the terminals in your plug, proceed as follows:

The wire which is coloured green and yellow must be connected to the terminal in the plug which is marked with

the letter E or by the earth symbol or coloured green or green and yellow.

The wire which is coloured blue must be connected to the terminal which is marked with the N or coloured black. The wire which is coloured brown must be connected to the terminal which is marked with the letter L or coloured red.

When wiring the plug, ensure that all strands of wire are securely retained in each terminal. Do not forget to tighten the mains lead clamp on the plug.

As the appliance must be earthed, do not use 2-pin sockets outlets, if you are in doubt, consult a qualified electrician.

Should the mains lead ever require replacement, it is essential that this operation be carried out by a qualified electrician and should only be replaced with a flexible cord of the same size i.e. 1.0mm2 cross sectional area PVC cable, available from our parts department (see Back Cover).

IF A MOULDED PLUG IS FITTED

In the event of replacing a fuse in the plug supplied an ASTA approved fuse to BS1362 must be fitted. NOTE: The fuse cover must be refitted when changing the fuse. In the event of losing the fuse cover the plug must not be used until a replacement fuse cover has been obtained and fitted. A new fuse cover can be obtained from your local Electricity Board. The colour of the correct replacement fuse cover is that of the coloured marks or inserts in the base of the plug.

Make sure that the cable does not become trapped when pushing the cooker into position.

PLEASE PHONE US TO REGISTER YOUR APPLIANCE AND ACTIVATE YOUR PARTS GUARANTEE ON 08448 24 24 24

ch60gpcf, ch60gpxf specifications

Hotpoint is a renowned brand in the home appliance industry, known for their high-quality kitchen products that combine efficiency, style, and durability. The Hotpoint models CH60GPXF and CH60GPCF are two versatile dual-fuel cookers that exemplify the brand's commitment to providing a superior cooking experience.

The CH60GPXF is designed for those who appreciate the combination of gas cooking with the precision of electric ovens. One of its standout features is the powerful four-burner gas hob, which allows for quick heating and excellent heat control while cooking. The burners vary in size, ensuring that you can accommodate a variety of pot and pan sizes. The fact that the hob is fitted with enamel supports minimizes cleaning time and keeps your kitchen looking pristine.

The electric ovens in the CH60GPXF offer a range of cooking functions, including conventional cooking and fan-assisted options. The fan oven circulates hot air evenly throughout the cavity, ensuring that food cooks uniformly. Moreover, the built-in grill function is perfect for achieving that crispy finish on meats and vegetables. Another remarkable feature is the easy clean enamel interior, which simplifies the cleaning process after cooking.

Turning to the CH60GPCF model, it shares many of the same core features but introduces additional technologies to enhance your cooking experience. The CH60GPCF also features a four-burner gas hob, but it may include advanced ignition systems for optimal ease of use, ensuring that you can light your burners with minimal effort.

In terms of design, both models exhibit a modern aesthetic with stainless steel finishes that seamlessly integrate into any kitchen decor. The ergonomic control knobs make it easy to set the temperature and cooking modes, while the large, double-glazed oven doors provide an excellent view of your cooking progress without opening the oven and losing heat.

Energy efficiency is another key characteristic of both cookers, helping users save on energy costs while reducing their environmental impact. With a blend of functionality, style, and efficiency, the Hotpoint CH60GPXF and CH60GPCF are ideal choices for culinary enthusiasts looking for reliable cookers that deliver outstanding performance in any kitchen setting. Whether you are preparing a simple family meal or hosting a dinner party, these models provide the versatility and technology needed to make cooking enjoyable and hassle-free.