Electrical Connection, Important Points

Electrical Connection

THIS APPLIANCE MUST BE EARTHED.

The installation procedure must be carried out by a qualified electrician.

The electrical safety of this appliance is guaranteed only if the appliance is correctly earthed in compliance with the standards of electrical safety.

The manufacturer can under no circumstances be considered responsible for any damage that might occur due to incorrect earthing of the hob.

The electric hob is not supplied with a power supply cord because the type of cord used depends on the type of electrical connection (see following diagram). Open the terminal box, following the instructions illustrated in the diagram below:

IMPORTANT POINTS:

Your hob is supplied with a special connection cable.

If ever the cable is damaged it should be replaced by an authorised service engineer only.

Disconnect the hob form the electrical supply before any work is carried out.

Electrical Connections:

Connecting the supply cord to the electrical mains: The hob must be connected to the mains by a double pole mains switch, which must have a minimum 0f 3mm space between the contacts, correctly fused with a capacity appropriate to that shown on the hob Rating Plate. All electrical wiring from the consumer unit to the appliance, via the switched double pole cooker outlet, must be of an acceptable type and current rating as above.

The supply cord should conform to BS6004 conductor size 4mm2, must be positioned so that no part of it reaches a temperature of 50°C above room temperature. The electrical installation must comply with the IEE Regulations, Building Regulation & local By-Laws.

Before making the connection, make sure that:

•the limiter switch (fuse) and the residual wiring can support the appliance load (see the rating plate).

•the mains system is properly earthed in compliance with current regulations and provisions.

•there is easy access to the socket or the double pole switch after the appliance is installed.

IMPORTANT:

If the hob is installed above a built-in oven, the electrical connection for the hob must be independent of that for the oven, both for safety reasons and to facilitate the removal of the oven for maintenance, repair etc.

Supply cable installation

The electric hobs are supplied without a cable. Use a cable: 4mm2

•open the teminal box by removing the "V" screw and taking off the cover.

•Fix the cable in place with the "F" cable clamp, close the lid and fasten it with the "V" screw.

1	2	3	4	5
•	•	•	•		•	•

	L			N

Voltage and frequency of power supply:

230-240V

50-60Hz

7000W

1	2	3	4	5
				F

E604 specifications

The Hotpoint E604 is a versatile and feature-rich built-in oven designed to enhance your cooking experience. Known for its efficient design and innovative technologies, it caters to both novice cooks and seasoned chefs alike. With a strong focus on user-friendly interfaces and energy efficiency, the Hotpoint E604 has become a popular choice for many modern kitchens.

One of the standout features of the Hotpoint E604 is its multifunctional cooking modes, allowing users to select between various settings to achieve optimal cooking results. These modes include conventional cooking, fan-assisted cooking, grilling, and more, providing the flexibility needed to handle a variety of dishes. The fan-assisted cooking mode ensures even heat distribution, making it perfect for baking and roasting.

The oven is equipped with a digital display and easy-to-use control knobs, making temperature adjustments and setting timers a breeze. This user-friendly approach reflects Hotpoint's commitment to convenience and accessibility in the kitchen. Another significant feature is the cavity's generous capacity, which can accommodate large dishes, thus making it suitable for family gatherings or dinner parties.

Energy efficiency is increasingly important in today’s cooking appliances, and the Hotpoint E604 does not disappoint. It meets high energy efficiency standards, helping to reduce electricity consumption while still delivering outstanding cooking performance. Hotpoint's commitment to sustainability is evident, making appliances that not only perform well but also contribute positively to the environment.

Cleaning the Hotpoint E604 is made easier with its self-cleaning function, which uses high temperatures to burn off food residues, leaving behind minimal mess. This feature saves time and effort, enabling home cooks to focus more on their culinary creations rather than on post-meal cleanup. Additionally, the oven's smooth enamel interior prevents food from sticking, further facilitating the cleaning process.

The Hotpoint E604 also incorporates advanced safety features, including a cool-touch door, ensuring that the exterior remains safe to touch while cooking is in progress. Moreover, it includes built-in timers and an automatic shut-off function for added peace of mind.

In summary, the Hotpoint E604 is a sophisticated oven that combines style, functionality, and energy efficiency. With its range of cooking modes, user-friendly controls, and convenient cleaning features, it stands out as an excellent addition to any kitchen, catering to various culinary needs and preferences.