Maintenance and care

Switching the appliance off

Disconnect your appliance from the electricity supply before carrying out any work on it.

Cleaning the appliance

•The stainless-steel or enamel-coated external parts as well as the rubber seals may be cleaned using a sponge that has been soaked in lukewarm water and neutral soap. If these stains are difficult to remove, use only specialised products. After cleaning, rinse and dry thoroughly. Do not use abrasive powders or corrosive substances.

•Ideally, the inside of the oven should be cleaned after each use, when it is still lukewarm. Use hot water and detergent, rinse and dry with a soft cloth. Do not use abrasive products.

•All accessories - with the exception of the sliding racks - can be washed like everyday crockery, and

are even dishwasher safe.

been replaced.

Replacing the light bulb

To replace the

oven light bulb: 1. Remove the glass cover of the

lamp-holder.

2. Remove the light bulb and replace it with a similar one:

Wattage 25 W, cap E 14.

3. Replace the glass cover (see diagram).

Sliding Rack Kit Assembly

To assemble the sliding racks:

Never use steam cleaners or pressure cleaners on the appliance.

Cleaning the oven door

Clean the glass part of the oven door using a sponge and a non-abrasive cleaning product, then dry thoroughly with a soft cloth. Do not use rough abrasive material or sharp metal scrapers as these could scratch the surface and cause the glass to crack.

To clean more thoroughly, you can remove the oven door.

1.Open the oven door fully (see diagram).

2.Lift up and turn the small levers located on the two hinges (see diagram).

	A
Left	Right guide
guide rail	rail

1.Remove the two frames, lifting them away from the spacers “A” (see figure).

2. Choose which shelf to

use with the sliding

rack. Paying attention to

oDire
C
f	c
extra on
	ti
	c
	ti
	on

the direction in which

the sliding rack is to be

extracted, position joint

B and then joint C on

the frame.

3.Grip the door on the two external sides and close it approximately half way. Unlock the door by pressing on the clamps F, then pull the door towards you lifting it out of its seat (see diagram).

To replace the door, reverse this sequence.

3. Secure the two

frames with the guide

rails using the holes

provided on the oven

walls (see diagram). The

holes for the left frame

are situated at the top,

while the holes for the

right frame are at the

Inspecting the seals

Check the door seals around the oven periodically. If the seals are damaged, please contact your nearest After-sales Service Centre (see Assistance). We recommend not using the oven until the seals have

bottom.

4. Finally, fit the frames on spacer A.

Do not place the sliding racks in position 5.

AHP662X/1, AHP662K/1, AHP66X/1, SE661X/1, SQ661I/1 specifications

The Hotpoint SQ661I/1, SE661X/1, AHP66X/1, AHP662K/1, and AHP662X/1 are a series of modern appliances designed to enhance daily kitchen tasks with innovative technology, energy efficiency, and style. These models stand out for their robust features and user-friendly interface, making them an ideal choice for contemporary households.

One of the key features across this range is the advanced thermal technology that ensures even cooking results. The SQ661I/1 model, for instance, offers an intelligent heating system that maintains precise temperature control, allowing users to achieve perfectly baked meals every time. The uniform heat distribution helps to eliminate cold spots, ensuring food is cooked thoroughly from all angles.

Additionally, these models include a variety of cooking functions such as grilling, baking, and steaming, providing versatility for different culinary techniques. The SE661X/1 features a multifunction oven, equipped with multiple cooking settings that allow users to experiment with different dishes effortlessly. This flexibility makes it suitable not only for everyday meals but also for special occasions.

Energy efficiency is another highlight of the Hotpoint series. With an impressive energy rating, these appliances are designed to minimize wastage while guaranteeing optimal performance. The AHP66X/1 model utilizes intelligent sensors to monitor energy use, further reducing costs and environmental impact without compromising performance.

Moreover, user convenience is a priority in the design of these appliances. The AHP662K/1 model includes an intuitive digital interface, which simplifies operation. The clear display allows users to select the desired cooking mode and settings with just a few taps, while the built-in timers ensure that meals are cooked for the right duration.

Safety features are also prominent, with models like the AHP662X/1 incorporating child lock options and automatic shut-off capabilities. This ensures peace of mind for families, especially in homes with young children.

In summary, the Hotpoint SQ661I/1, SE661X/1, AHP66X/1, AHP662K/1, and AHP662X/1 are not just appliances; they are designed to cater to the evolving needs of the modern kitchen. With their advanced cooking technologies, energy efficiency, versatile features, and emphasis on safety, they offer an ideal solution for anyone looking to enhance their culinary experience. Whether you're roasting, baking, or steaming, these appliances deliver outstanding performance for both novice cooks and seasoned chefs alike.