Fastening Clamps Assembly Diagram, =20mm topBack

Installation

Fastening Clamps - Assembly Diagram

Clamp Position for	Clamp Position for
H=30mm top	H=40mm top
	Front

Clamp Position for

H=20mm topBack

N.B: Use the clamps contained in the "accessory kit."

f)In the event the hob is not installed above a built-in oven, a woodpanelmustbeinsertedasinsulation.Thispanelmustbe placed at least 20 mm from the bottom of the hob itself.

Important:Wheninstallingthehobaboveabuilt-inoven,theoven should be placed on two wooden strips; in the case of a joining cabinet surface, remember to leave a space of at least 45 x 560 mm at the back.

.	45	mm.
mm		mm.
560

When installing the hob above a built-in oven without forced ventilation,ensurethatthereareairinletsandoutletsforventilating theinteriorofthecabinetadequately.

Gas Connection for the Hob

The hob should be connected to the gas supply by an authorized installer. During installation of this product it is essential to fit an approved gas tap to isolate the supply from the appliance for the convenienceofanysubsequentremovalorservicing.Connection of the appliance to the gas mains or liquid gas tanks must be carriedoutaccordingtothesafetystandardscurrentlyinforce,and only after it is ascertained that it is suitable for the type of gas to be used. If not, follow the instructions indicated in the section entitled, “Adapting the Hob for Different Types of Gas”. If the hob is to be connected to tanks containing liquid gas, use pressure regulators that comply with current safety standards.

Important: To insure that the appliance operates safety, the gas is regulated correctly and your appliance lasts over time, make sure that gas pressure levels comply with the indications given in Table 1, “Nozzle and Burner Specifications”.

Gas Connection to Non-flexible Pipe (copper or steel)

Connection to the gas source must be done in such a way as to not create any stress points at any part of the appliance.

The appliance is fitted with an adjustable, "L" shaped connector and a gasket for the attachment to the gas supply. Should this connector have to be turned, the gasket must be replaced (supplied with the appliance).

The gas feed connector to the appliance is a threaded, male 1/2" connectorforroundgaspipe.

Gas Connection to Flexible Steel Pipe

The gas feed connector to the appliance is a threaded, male 1/2" connector for round gas pipe. Only use pipes, tubes and gaskets thatcomplywithcurrentsafetycodes. Themaximumlengthofthe flexible pipes must not exceed 2000 mm. Once the connection hasbeenmade,ensurethattheflexiblemetaltubedoesnottouch any moving parts and is not crushed.

Check the Seal

Once the hob has been installed, make sure all the connections are properly sealed, using a soapy water solution. Never use a flame.

GF640, GF641 specifications

The Hotpoint GF641 and GF640 are modern gas cookers designed to cater to the needs of today’s busy kitchens, combining efficiency with user-friendly features. These models embody Hotpoint's commitment to quality and innovation, ensuring that users experience both convenience and culinary excellence in their cooking endeavors.

One of the standout features of the Hotpoint GF641 is its four gas burners, which come in varying sizes to accommodate different cooking tasks. This allows for versatile meal preparation, whether simmering, boiling, or frying. The burners are designed with high-efficiency technology, ensuring optimal heat distribution for consistently excellent results. With precise temperature control, users can cook with confidence, knowing that their dishes will be prepared to perfection.

The GF640 offers similar advantages, featuring a robust stainless steel hob that not only enhances the aesthetic appeal of any kitchen but also provides durability and ease of cleaning. The clean lines and sleek design make it a great addition to both contemporary and traditional interiors, while the removable burner caps enhance maintenance efficiency.

Both models are equipped with an integrated grill, allowing for a range of cooking options from roasting meats to melting cheese on top of dishes. The grill's adjustable height ensures that users can achieve the perfect finish on their meals, making it ideal for both quick snacks and elaborate dinners.

Safety is a priority in the design of the GF641 and GF640. They come with flame failure devices that automatically cut off the gas supply if a flame goes out, providing peace of mind during cooking. Additionally, the ovens in both models feature an easy-to-read gas oven thermometer, enabling precise cooking and baking outcomes.

The functionality of the Hotpoint GF641 and GF640 is further enhanced by their energy-efficient ratings, helping users save on energy bills while reducing their environmental footprint. With user-friendly ignition, these cookers ensure a hassle-free start to every cooking session.

In conclusion, the Hotpoint GF641 and GF640 offer an impressive combination of features, technologies, and characteristics that make them an excellent choice for anyone looking to upgrade their kitchen appliances. Their thoughtful design, safety features, and versatile cooking options provide an ideal platform for culinary creativity. Whether you are a novice cook or an experienced chef, these cookers promise to deliver reliable performance and exceptional results every time.

Installation