Hotpoint SE48101PX, Oven, SE48101PGX operating instructions Care and maintenance

Page 13

Care and maintenance

Switching the appliance off

Disconnect your appliance from the electricity

Sliding rack kit assembly

To assemble the sliding racks:

GB

 

supply before carrying out any work on it.

Cleaning the appliance

• The stainless-steel or enamel-coated external

parts and the rubber seals may be cleaned using

a sponge that has been soaked in lukewarm water

and neutral soap. Use specialised products for

the removal of stubborn stains. After cleaning,

rinse and dry thoroughly. Do not use abrasive

A

1.Remove the two frames, lifting them away from the spacers A (see figure).

 

powders or corrosive substances.

The inside of the oven should ideally be cleaned

 

after each use, while it is still lukewarm. Use hot

 

water and detergent, then rinse well and dry with

 

a soft cloth. Do not use abrasive products.

All accessories - with the exception of the sliding

 

racks - can be washed like everyday crockery,

 

and are even dishwasher safe.

We recommend that detergents are not sprayed

 

directly onto the control panel, but that a sponge

is used instead.

Left

Right guide

guide rail

rail

 

B

 

 

 

C Di

 

 

of rect

 

e

i

 

x

on

 

tract

 

 

i

 

 

on

2.Choose which shelf to use with the sliding rack. Paying attention to the direction in which the sliding rack is to be extracted, position joint B and then joint C on the frame.

￿Never use steam cleaners or pressure cleaners on the appliance.

Inspecting the seals

Check the door seals around the oven regularly. If the seals are damaged, please contact your nearest After-sales Service Centre (see Assistance). We recommend that the oven is not used until the seals have been replaced.

D

3.Secure the two frames with the guide rails using the holes provided on the oven walls (see diagram). The holes for the left frame are situated at the top, while the holes for the right frame are at the bottom.

Replacing the light bulb

To replace the oven light bulb:

Oven compartment

Lamp

Seal

Glass door

1.Remove the glass cover using a screwdriver.

2.Remove the light bulb and replace it with a similar one: Wattage 15 W, cap E 14.

Replace the glass cover, making sure the seal is positioned correctly (see diagram).

4. Finally, fit the frames on the spacers A.

￿Do not place the sliding racks in position 5.

Automatic cleaning with the FAST CLEAN function

With the FAST CLEAN mode, the internal temperature of the oven reaches 500°C. The pyrolytic cycle is activated and burns away food and grime residues. Dirt is literally incinerated. Keep children away from the appliance during the automatic cleaning cycle as surfaces may become very hot. Particles may ignite inside the oven due to the spontaneous combustion process. There is no cause for concern: this process is both normal and hazard-free.

13

Image 13
Contents Operating Instructions Positioning InstallationPage This Appliance Must be Earthed Electrical ConnectionOverall view Description ApplianceControl panel Start-up and use Page Manual cooking modes Cooking modesAutomatic cooking modes Page Programming cooking Practical cooking adviceCooking advice table General safety Precautions and tipsDisposal Respecting and conserving the environmentCare and maintenance Page Assistance Guarantee After Sales Service Page Page Xerox Fabriano
Related manuals
Manual 20 pages 56.59 Kb Manual 36 pages 39.88 Kb Manual 20 pages 11.51 Kb

SE48101PX, Oven, SE48101PGX specifications

The Hotpoint SE48101PX is a remarkable built-in electric oven that delivers a sophisticated cooking experience for both novice cooks and seasoned chefs alike. This appliance combines sleek aesthetics with advanced technology, making it an ideal choice for modern kitchens.

One of the standout features of the SE48101PX is its generous capacity. With an impressive 71 liters of usable space, this oven offers ample room for preparing large meals and multiple dishes simultaneously. Whether it's a family dinner or festive gatherings, you can confidently cook for a crowd.

The oven incorporates Hotpoint's innovative Multiflow technology, which ensures even heat distribution throughout the cooking cavity. This results in perfectly cooked meals every time, reducing the risk of uneven baking or roasting. The fan-assisted heating system circulates hot air, allowing for faster cooking times and improved energy efficiency.

Another significant advantage of the SE48101PX is its user-friendly control panel. Equipped with intuitive touch controls and a clear LED display, users can easily adjust settings and monitor cooking progress at a glance. The oven features multiple cooking functions, including fan cooking, conventional cooking, grill, and defrost options, providing flexibility for various culinary techniques.

Cleaning the SE48101PX is made hassle-free thanks to its catalytic lining. This self-cleaning technology breaks down grease and food residues during the cooking process, allowing for a quick wipe-down after use. In addition, a removable glass door enhances ease of cleaning, ensuring that the oven remains in pristine condition without extensive effort.

Safety is also a priority with this appliance. The SE48101PX features a child lock function, which prevents unintended use, making it a suitable option for families with young children. The cool-touch door minimizes the risk of burns, ensuring that the exterior stays safe to touch during operation.

In summary, the Hotpoint SE48101PX combines advanced technology with practical features to provide an exceptional cooking experience. Its spacious capacity, even heat distribution, intuitive controls, and easy cleaning make it an excellent addition to any kitchen, enhancing culinary creativity while ensuring convenience and safety.