Programmer, Setting the time, Buzzer volume

The Programmer

Display for all functions : clock, timer, cooking duration and end-of-cooking/fast-cleaning time

Timer indicator light

Indicator light for a programmed operation:

-lit : operation underway

-off: operation finished

-flashing: programmed operation has finished

Button to start cooking

Button to set the cooking duration

Button to set the end-of-cooking time

Button to set the timer

5 s.

Auto A

-off: manual mode

-lit: an operation has been programmed

Buttons + and - to set the clock, timer, cooking duration and end-of-operation time, press on:

+to increase the time - to reduce the time

Setting the time

You can only set the time if the mode selector is set to "0". After the appliance has been connected to the power supply (or following a power failure), a flashing "0.00" is displayed. Press keys "+" and/or "-" to set the time.

The time set is memorised, but you still have another 3 seconds to modify it, as all the other buttons remain disabled for that time.

Any changes to the time can be made by pressing button

rand holding it down, until the time appears back on the

display and then pressing button sor t. Upon releasing these buttons, the time set will be memorised, and you still have another 3 seconds to continue your modification.

Minute Minder Feature

The timer can only operate with the oven switched off and the function selector set to position 0.

Please remember that the timer does not control the start- ing or stopping of the oven, it merely sounds a buzzer when the time is up and can be interrupted at any time just by pressing any button.

To set the timer, briefly press button r and then make adjustments using sor t.

Upon releasing button sor t, the time set is memorised but you still have another 3 seconds to continue making any changes. The display will reset to show the time and

countdown will begin immediately. The nicon will remind you the Minute Minder is on.

Once the countdown is over, a buzzer will sound, and will stop doing so after 1 minute or if you press any button whatsoever.

Please remember that the countdown is reset and the n icon comes off once cooking starts.

Buzzer volume

You can adjust the volume of the buzzer by pressing button "-" (when the signal sounds) until you attain the required volume.

Cooking without the programmer

When the oven is switched off (mode selector set to 0), all the keys (except for "-" to adjust the volume of the acoustic signal) are disabled.

Select a cooking mode by turning the function selector clockwise. Each function has a predefined cooking time

that you can see by pressing . You can modify the cooking time according to the recipes you use. Simply

press and choose the cooking time you require using

the “-” and/or “+”.

The display indicates a recommended temperature, which is independent from that indicated on the temperature selector: you can change it by turning the temperature selector knob.

The grill display indicates a power level between 1 and 5 (1 for minimum power and 5 for maximum power).

Your oven is now ready to start cooking: press the key. The oven begins the pre-heating phase, during which symbol blinks. It stops blinking when pre-heating is done (after approximately 10 minutes).

If you fail to press the cooking start key one minute after having selected a mode, the word "OFF" comes up on the display and the keys are disabled. In this case, set the mode selector back to "0" and proceed with the various adjustments.

SD97PI, SD97PC specifications

The Hotpoint SD97PC and SD97PI are advanced built-in ovens designed to provide exceptional cooking performance and flexibility for modern kitchens. Both models stand out for their impressive range of features, innovative technologies, and stylish design.

One of the key characteristics of the SD97PC and SD97PI is their multifunction capability. Both ovens offer various cooking modes, allowing users to choose the best settings for their culinary needs. Whether you opt for traditional baking, grilling, or fan-assisted cooking, these ovens give you the versatility to explore and create a diverse array of dishes. The inclusion of a pizza function also allows for the perfect crust every time, catering to pizza enthusiasts.

These models are equipped with advanced cooking technologies that enhance the user experience. The Dynamic Cooking System ensures even heat distribution throughout the oven, minimizing hot spots for consistent results. This technology is especially beneficial for baking multiple trays of cookies or casseroles, as it ensures that all food items cook evenly.

In addition to cooking features, the SD97PC and SD97PI emphasize user-friendly operation. The intuitive digital interface provides straightforward access to all settings, making it simple for cooks of any skill level to navigate. The ovens come with a temperature probe, which allows for precise monitoring of internal temperatures, ensuring perfectly cooked meats and roasts without the risk of overcooking.

Safety is also a priority with these models. The ovens include a child lock feature, preventing little hands from accidentally adjusting settings. Furthermore, the self-cleaning function takes the hassle out of maintenance, using high-temperature cleaning to eliminate grime and spills without the need for harsh chemicals.

Both models feature a sleek and modern design, available in a stylish stainless steel finish. This not only enhances the aesthetic appeal of your kitchen but also ensures durability and ease of cleaning. The spacious interior allows for cooking larger meals, making it ideal for families.

In summary, the Hotpoint SD97PC and SD97PI kombinate versatility, advanced technology, user-friendly operation, and safety features, making them excellent choices for anyone looking to enhance their cooking experience in a modern kitchen. With their stylish design and impressive functionality, they stand ready to transform meal preparation into a more enjoyable and efficient process.