Hotpoint SE101PGX manual

Page 6

GB

- Press the

button to stop cooking.

 

 

-Set a new cooking mode (previous settings will be reset).

If a blackout occurs while the oven is already in operation, an automatic system within the appliance will reactivate the cooking mode from where it was interrupted as long as the temperature has not dropped below a certain level. Programmed cooking modes which have not started will not be restored and must be reprogrammed.

￿There is no preheating stage for the BARBECUE mode.

￿Never put objects directly on the bottom of the oven; this will avoid the enamel coating being damaged.

￿Always place cookware on the rack(s) provided.

Cooling ventilation

In order to cool down the external temperature of the oven, a cooling fan generates a stream of air which escapes between the oven control panel and the oven door. At the beginning of the FAST CLEAN mode, the cooling fan operates at low speed.

￿Once the cooking has been completed, the cooling fan continues to operate until the oven has cooled down sufficiently.

Oven light

When the oven is not in operation, the lamp can be switched on at any time by opening the oven door.

6

Image 6
Contents Operating Instructions Installation PositioningElectrical Connection This Appliance Must be EarthedDescription Appliance Overall viewControl panel Start-up and use Page Cooking modes Manual cooking modesAutomatic cooking modes Pizza mode Practical cooking advice Programming cookingCooking advice table Disposal Precautions and tipsGeneral safety Respecting and conserving the environmentCleaning the appliance Care and maintenanceSwitching the appliance off Cleaning the oven doorAutomatic cleaning with the Fast Clean function After Sales Service After Sales ServiceGuarantee GuaranteeGBXerox Business Services