Hotpoint SE101PX manual Electrical Connection, This Appliance Must be Earthed

Page 3

Electrical Connection

Electrical connection

The electrical connection to the mains must be made on the appliance. The power voltage and frequency are as indicated on the rating plate.

!THIS APPLIANCE MUST BE EARTHED.

Connecting the power supply cable

To open the terminal board:

•Using a screwdriver, press on the tabs situated on each side of the terminal board cover.

•Pull open the terminal board cover.

To connect the power supply cable, proceed as follows:

_Unscrew the cable clamp screw and the contact screws L-N-$.

•Fasten the wires beneath the screwheads using the following colour scheme: Blue (N) Brown (L) Yellow-Green￿ $

•Fasten the power supply cable in the corresponding cable clamp and close the cover.

Power cable supply connection to the electrical

mains:GB

We recommend you use a power supply cable which is long enough to allow you to take the oven out of its recess in the event of maintenance operations (only use HAR - H 05 - RRF quality cables fitted with a plug conforming to the regulations in force.

The plug must be accessible at all times.

Unplug the appliance before all operations, even when replacing the oven lamp.

Using the appliance without correct earthing is highly dangerous.

!After connecting the appliance to the flexible cable, tighten all the screws on the terminal board.

TABLE OF CHARACTERISTICS

 

width 43.5 cm

Dimensions

height 32 cm

 

depth 40 cm

Volume

56 l

Electrical Connection:

4 2 N L

Voltage Frequency: 230 V-1+N 50Hz

Fuse Section: 16A Supply cable:

3x1.5mm2

Electrical

voltage: 220-240V ~ 50/60Hz

maximum power absorbed

connections

2800 W

 

 

 

 

Directive 2002/40/EC on the

 

label of electric ovens.

 

Regulation EN 50304

 

ENERGY LABEL

Declared energy

 

 

 

 

consumption for Forced

 

convection Class

 

 

– heating mode:

Gratin

This appliance conforms to the following European Economic Community directives: 73/23/EEC dated

You can connect your oven to the system means of a terminal board. Refer to above information for the minimal cable sections and the calibration of the protective elements according to the connection.

If the appliance is installed with a junction box, an omnipolar circuit breaker - with a minimum contact opening of 3mm - should be installed between the appliance and the mains.

19/02/73 (Low Voltage) and subsequent amendments - 89/336/EEC dated 03/05/89 (Electromagnetic Compatibility) and subsequent amendments - 93/68/EEC dated 22/07/93 and subsequent amendments.

2002/96/EEC

3

Page 2 Page 4
Image 3
Page 2 Page 4
Contents Operating Instructions Positioning InstallationThis Appliance Must be Earthed Electrical ConnectionDescription Appliance Overall viewControl panel Start-up and use Page Cooking modes Manual cooking modesAutomatic cooking modes Pizza mode Programming cooking Practical cooking adviceCooking advice table Respecting and conserving the environment Precautions and tipsGeneral safety DisposalCleaning the oven door Care and maintenanceSwitching the appliance off Cleaning the applianceAutomatic cleaning with the Fast Clean function After Sales Service After Sales ServiceGuaranteeGB GuaranteeXerox Business Services

SE101PX specifications

The Hotpoint SE101PX is a versatile and efficient built-in electric single oven designed for modern kitchens. With its sleek and contemporary design, this oven not only functions as an essential cooking appliance but also adds a touch of style to any space. The SE101PX is known for its innovative features, making it a popular choice among home cooks and culinary enthusiasts.

One of the standout characteristics of the SE101PX is its generous oven capacity, allowing users to cook multiple dishes simultaneously or accommodate larger meals with ease. With a total capacity of around 71 liters, it is well-suited for families and individuals who enjoy entertaining guests. The interior is designed with a smooth enamel coating, which makes cleaning easy and helps prevent food from sticking.

The Hotpoint SE101PX is equipped with several cooking functions to enhance versatility and performance. The traditional cooking function utilizes top and bottom heat for even cooking results, while the fan-assisted mode circulates hot air for uniform baking, making it ideal for pastries and batch cooking. Additionally, the grill function is perfect for achieving that crispy finish on meats or for toasting bread. This oven offers a wide range of settings, allowing users to explore various cooking techniques.

For added safety and convenience, the SE101PX includes a useful timer feature, which helps keep track of cooking times, reducing the risk of overcooking meals. The appliance also boasts an energy efficiency rating that aligns with modern standards, ensuring lower running costs and a reduced environmental footprint.

One of the essential technologies integrated into the SE101PX is the Catalytic Cleaning method. This feature involves specially coated panels that absorb grease and spills during cooking, which then oxidize at high temperatures, simplifying the cleaning process.

Moreover, the oven is designed with user-friendly controls, featuring an intuitive dial and clear display for easy navigation through settings. The stainless steel finish not only adds to its durability but also contributes to its modern aesthetic.

Overall, the Hotpoint SE101PX combines functionality, efficiency, and style to meet the demands of the modern kitchen. With its array of features and thoughtful design, it is an excellent choice for anyone looking to elevate their cooking experience.
Top Page Image Contents