Hotpoint E7134, E6005 manual Safety devices, Acoustic signal, Overheating, Safety cut out

The safety devices

Acoustic signal

Anomalies such as:

•an object (such as a saucepan or a lid, etc.) placed for more than 10 seconds on the control zone,

•boiled-over liquids or food spilled on the control zone,

•prolonged pressure on a key,...

could cause a beep to sound and the hob to turn off.

To stop the beep from sounding, remove the cause of the malfunction.

To use the hob, turn it back on and re-select the cooking zone(s) you wish to use. Set the desired heating power.

Overheating

Prolonged use of the hob could cause the electronic components to overheat.

A thermal protection device momentarily sets a reduced power (setting 3) on the front cooking zones until the temperature has dropped back down to a suitable level.

Safety cut out

Your appliance is fitted with a safety cut out which intervenes after a certain amount of time (see table) depending on the power setting. When the safety cut out has intervened, the power display indicates “0”.

for example: the back right cooking zone is set to 5 and the front left zone is set to 2. The back right zone will turn off after 4 hours of operation and the front left zone will turn off after 6 hours of operation.

To unlock the controls, turn the hob off by pressing the key.

Power level	Maximum operating
	time in hours
1-2	6
3-4	5
5	4
6-7-8	1,5
9	1,5

10