Practical advice on using the appliance

Practical advice on using the appliance

To obtain the best results from your hob:

•Use pans with a thick, flat base in order to fully utilise the cooking zone.

•Always use pans with a diameter which is large enough to cover the hotplate fully, in order to use all the available heat.

•Make sure that the base of the cookware is always clean and dry, in order to fully utilise and extend the life of both the cooking zones and the cookware.

•Avoid using the same cookware which has been used on gas burners: the heat concentration on gas burners may distort the base of the pan, causing it not to adhere correctly.

Safety devices

Pan sensor

Each cooking zone is equipped with a pan sensor device. The hotplate only emits heat when a pan with suitable measurements for the cooking zone is placed on it. If the indicator light is flashing, it may indicate:

•An incompatible pan

•A pan whose diameter is too small

•The pan has been removed from the hotplate.

Residual heat indicators

Each cooking zone is equipped with a residual heat indicator. This indicator signals which cooking zones are still at a high temperature. If the power display

shows , the cooking zone is still hot. It is possible, for example, to keep a dish warm or melt butter or chocolate. As the cooking zone cools, the

power display will show . The display switches off when the cooking zone has cooled sufficiently.

Overheating protection

If the electronic elements overheat, the hob switches off automatically and F appears on the display,

followed by a flashing number. When the temperature has reached a suitable level, this message disappears and the hob may be used again.

Safety switch

The appliance has a safety switch which automatically switches the cooking zones off after they have been in operation for a certain amount of time at a particular power level. When the safety switch has been triggered, the display shows “0”. For example: the right rear hotplate is set to 5 and will switch off after 5 hours of continuous operation, while the front left hotplate is set to 2 and will switch off after 8 hours.

	Power level	Maximum operating
	Power level	time in hours
		time in hours

	1	9

	2	8

	3	7

	4	6

	5	5

	6	4

	7	3

	8	2

	9	1

Buzzer

This can also indicate several irregularities:

•An object (a pan, cutlery, etc.) has been placed on the control panel for more than 10 seconds.

•Something has been spilt on the control panel.

•A button has been pressed for too long. All of the above situations may cause the buzzer to sound. Remove the cause of the malfunction to stop the buzzer. If the cause of the problem is not removed, the buzzer will keep sounding and the hob will switch off.

CRA 641 DC specifications

The Hotpoint CRA 641 DC is an innovative and efficient cooking appliance that combines modern technology with user-friendly features for an exceptional culinary experience. Known for its sleek design and practical functions, this built-in gas cooktop is ideally suited for contemporary kitchens, making it an excellent choice for home chefs and cooking enthusiasts alike.

One of the standout features of the Hotpoint CRA 641 DC is its four high-efficiency burners. These burners provide varying levels of heat output, allowing for complete versatility when preparing meals. The powerful burners cater to different cooking techniques, from simmering sauces at low heat to boiling water or searing meat at high temperatures. This flexibility is crucial for multitasking in the kitchen, enabling users to manage different dishes simultaneously.

The cooktop's surface is crafted from durable stainless steel, which ensures longevity and ease of maintenance. Its smooth finish not only enhances the aesthetic appeal of the kitchen but also makes cleaning a hassle-free task. The surface is designed to resist stains and scratches, keeping the appliance looking new over time.

Safety is a priority in the design of the Hotpoint CRA 641 DC. It features a flame failure device that automatically shuts off the gas supply in case the flame goes out. This essential safety feature provides peace of mind while cooking, as users can focus on their culinary creations without worrying about potential hazards.

Another significant aspect of the Hotpoint CRA 641 DC is its ergonomic control knobs, which are designed for easy operation. The front-mounted knobs allow for straightforward access and control, ensuring that users can adjust the flame levels with precision.

Moreover, this cooktop is compatible with various cookware types, including cast iron, stainless steel, and non-stick materials. The versatility of the cooktop ensures that users can utilize their preferred pots and pans without limitation.

Overall, the Hotpoint CRA 641 DC is an excellent addition to any culinary space, marrying style, functionality, and safety. Its smart features and user-oriented design offer a seamless cooking experience that caters to both novice cooks and seasoned chefs, making it a noteworthy consideration for anyone looking to enhance their kitchen capabilities. The combination of advanced technology and considerate design embodies what modern cooking appliances should be. Whether preparing simple weeknight meals or hosting elaborate dinner parties, this cooktop can rise to the occasion, making it an essential kitchen ally.