Practical advice on using the appliance

Practical advice on using the appliance

Use cookware made from materials which are compatible with the induction principle (ferromagnetic material). We especially recommend pans made from: cast iron, coated steel or special stainless steel adapted for induction. Use a magnet to test the compatibility of the cookware.

SUITABLE

UNSUITABLE

*	Copper,
Cast iron	Copper,
Enamelled steel	Aluminium, Glass, Earthenware,
Special stainless steel	Ceramic, non magnetic Stainless steel

In addition, to obtain the best results from your hob:

•Use pans with a thick, flat base in order to fully utilise the cooking zone.

•Always use pans with a diameter which is large enough to cover the hotplate fully, in order to use all the available heat.

•Make sure that the base of the cookware is always clean and dry, in order to fully utilise and extend the life of both the cooking zones and the cookware.

•Avoid using the same cookware which has been used on gas burners: the heat concentration on gas burners may distort the base of the pan, causing it not to adhere correctly.

Safety devices

Pan sensor

Each cooking zone is equipped with a pan sensor device. The hotplate only emits heat when a pan with suitable measurements for the cooking zone is placed on it. If the indicator light is flashing, it may indicate:

•An incompatible pan

•A pan whose diameter is too small

•The pan has been removed from the hotplate.

Residual heat indicators

Each cooking zone is equipped with a residual heat indicator. This indicator signals which cooking zones

are still at a high temperature. If the power display

shows , the cooking zone is still hot. It is possible, for example, to keep a dish warm or melt butter or chocolate. As the cooking zone cools, the power

display will show . The display switches off when the cooking zone has cooled sufficiently.

Overheating protection

If the electronic elements overheat, the hob switches off automatically and F appears on the display,

followed by a flashing number. When the temperature has reached a suitable level, this message disappears and the hob may be used again.

Safety switch

The appliance has a safety switch which automatically switches the cooking zones off after they have been in operation for a certain amount of time at a particular power level. When the safety switch has been triggered, the display shows “0”.

For example: the right rear hotplate is set to 5 and will switch off after 5 hours of continuous operation, while the front left hotplate is set to 2 and will switch off after 8 hours.

	Power level	Maximum operating
	Power level	time in hours
		time in hours

	1	9

	2	8

	3	7

	4	6

	5	5

	6	4

	7	3

	8	2

	9	1

Buzzer

This can also indicate several irregularities:

•An object (a pan, cutlery, etc.) has been placed on the control panel for more than 10 seconds.

•Something has been spilt on the control panel.

•A button has been pressed for too long. All of the above situations may cause the buzzer to sound. Remove the cause of the malfunction to stop the buzzer. If the cause of the problem is not removed, the buzzer will keep sounding and the hob will switch off.

CIO 642 DD B, CIO 644 DD Z specifications

The Hotpoint CIO 644 DD Z and CIO 642 DD B are modern built-in induction hobs designed to cater to the culinary needs of today’s chefs, both amateur and professional. These models blend advanced technology with user-friendly features, making them favorable additions to contemporary kitchens.

One of the standout features of both models is the advanced induction cooking technology. This innovation allows the hobs to heat pots and pans directly, providing precise temperature control and reducing cooking times significantly. Induction cooktops are not only faster but also offer increased energy efficiency, making them an environmentally friendly option in comparison to traditional gas or electric hobs.

The CIO 644 DD Z boasts four induction zones, ideal for a variety of cooking tasks. Each zone is equipped with its own power boost function, enabling quick heating for boiling and frying. This model further enhances convenience with its intuitive touch controls, allowing users to adjust temperatures and settings with ease. The LED display provides clear visibility of the current settings, ensuring that users can monitor their cooking progress effortlessly.

On the other hand, the CIO 642 DD B offers a similar configuration but is designed with elegance and functionality in mind. The hob features a sleek black ceramic glass surface that not only looks stylish but is also easy to clean. Like its counterpart, this model includes multiple cooking zones with varying sizes to accommodate different cookware. The safety features such as child lock and residual heat indicators ensure a safe cooking environment, making it suitable for families.

Both models are equipped with a timer function that allows users to set cooking durations for added convenience. Once the set time has elapsed, the hob will automatically shut off, preventing overcooking and ensuring perfect dishes every time.

The Hotpoint CIO 644 DD Z and CIO 642 DD B are designed with user comfort in mind. Their minimalist designs make them an attractive addition to any kitchen, while their robust functionalities cater to the demands of cooking enthusiasts. Whether you're simmering sauces, searing meats, or preparing delicate dishes, these induction hobs provide the versatility and reliability required for a seamless cooking experience. For those looking to upgrade their kitchen appliances, the Hotpoint CIO series is a remarkable choice that combines style, safety, and efficiency.