Timer, Control panel lock, Demo mode

	4. Set the cooking duration using the -and +
GB	4. Set the cooking duration using the -and +
	buttons.
	buttons.
	5. Confirm by pressing the	button.
	The timer begins counting down immediately. A
	buzzer sounds for approximately 1 minute and the
	cooking zone switches off when the set programme
	has finished.
	Repeat the above procedure for each hotplate you
	wish to programme.
	Using multiple programmes and the display
	If one or more hotplates are programmed, the display
	will show the data for the hotplate with the least time
	remaining, and the light corresponding to the position
	of the hotplate will flash. The lights corresponding to
	the other hotplates programmed will be switched on.
	To display the time remaining for the other
	programmed hotplates, press the		button

repeatedly. The times remaining for each hotplate will be shown in a clockwise order, beginning with the front left hotplate.

Changing the programme

1.Press the button repeatedly until the duration you wish to change is shown.

2. Use the buttons to set the new duration.

3. Confirm by pressing the button.

To cancel a programme, follow the above instructions. At step 2, press the - button: the duration decreases

progressively until it reaches 0 and switches off. The programme resets and the display exits programming mode.

Timer

The hob must be switched on.

The timer can be used to set a duration up to 99 minutes.

1.Press the programming button until the timer indicator light is illuminated.

2. Set the desired duration using the -and +

buttons.

3. Confirm by pressing the button.

The timer begins counting down immediately. When the time has elapsed, a buzzer will sound (for one minute).

Control panel lock

When the hob is switched on, it is possible to lock the oven controls in order to avoid accidental changes being made to the settings (by children, during

cleaning, etc.). Press the button to lock the

control panel: the indicator light above the button will switch on.

To use any of the controls (e.g. to stop cooking), you

must switch off this function. Press the button for

a few moments, the indicator light will switch off and the lock function will be removed.

Switching off the hob

Press the button to switch the appliance off.

If the control panel lock has been activated, the controls will continue to be locked even after the hob is switched on again. In order to switch the hob on again, you must first remove the lock function.

“Demo” mode

It is possible to set the hob to a demonstration mode where all the controls work normally but the heating elements do not switch on. To activate the “demo” mode the hob must be switched on, with all the hotplates switched off.

•Press and hold the +and - buttons

simultaneously for 6 seconds. When the 6 seconds have elapsed, the ON/OFF and CONTROLS

LOCKED indicator lights will flash for one second. Release the + and - buttons and press the button;

•The display will show the text DE and MO and the hob will be switched off.

•When the hob is switched on again it will be set to the “demo” mode.

To exit this mode, follow the procedure described above. The display will show the text DE and OF and the hob will be switched off. When it is next switched on, the hob will function normally.

CIO 640 DD Z, CIO 744 DO B, CIO 642 DD B specifications

The Hotpoint CIO 644 DD Z and CIO 642 DD B are modern built-in induction hobs designed to cater to the culinary needs of today’s chefs, both amateur and professional. These models blend advanced technology with user-friendly features, making them favorable additions to contemporary kitchens.

One of the standout features of both models is the advanced induction cooking technology. This innovation allows the hobs to heat pots and pans directly, providing precise temperature control and reducing cooking times significantly. Induction cooktops are not only faster but also offer increased energy efficiency, making them an environmentally friendly option in comparison to traditional gas or electric hobs.

The CIO 644 DD Z boasts four induction zones, ideal for a variety of cooking tasks. Each zone is equipped with its own power boost function, enabling quick heating for boiling and frying. This model further enhances convenience with its intuitive touch controls, allowing users to adjust temperatures and settings with ease. The LED display provides clear visibility of the current settings, ensuring that users can monitor their cooking progress effortlessly.

On the other hand, the CIO 642 DD B offers a similar configuration but is designed with elegance and functionality in mind. The hob features a sleek black ceramic glass surface that not only looks stylish but is also easy to clean. Like its counterpart, this model includes multiple cooking zones with varying sizes to accommodate different cookware. The safety features such as child lock and residual heat indicators ensure a safe cooking environment, making it suitable for families.

Both models are equipped with a timer function that allows users to set cooking durations for added convenience. Once the set time has elapsed, the hob will automatically shut off, preventing overcooking and ensuring perfect dishes every time.

The Hotpoint CIO 644 DD Z and CIO 642 DD B are designed with user comfort in mind. Their minimalist designs make them an attractive addition to any kitchen, while their robust functionalities cater to the demands of cooking enthusiasts. Whether you're simmering sauces, searing meats, or preparing delicate dishes, these induction hobs provide the versatility and reliability required for a seamless cooking experience. For those looking to upgrade their kitchen appliances, the Hotpoint CIO series is a remarkable choice that combines style, safety, and efficiency.