Practical advice on using the appliance

Practical advice on using the appliance

Use cookware made from materials which are compatible with the induction principle (ferromagnetic material). We especially recommend pans made from: cast iron, coated steel or special stainless steel adapted for induction. Use a magnet to test the compatibility of the cookware.

SUITABLE

UNSUITABLE

*	Copper,
Cast iron	Copper,
Enamelled steel	Aluminium, Glass, Earthenware,
Special stainless steel	Ceramic, non magnetic Stainless steel

In addition, to obtain the best results from your hob:

•Use pans with a thick, flat base in order to fully utilise the cooking zone.

•Always use pans with a diameter which is large enough to cover the hotplate fully, in order to use all the available heat.

•Make sure that the base of the cookware is always clean and dry, in order to fully utilise and extend the life of both the cooking zones and the cookware.

•Avoid using the same cookware which has been used on gas burners: the heat concentration on gas burners may distort the base of the pan, causing it not to adhere correctly.

Safety devices

Pan sensor

Each cooking zone is equipped with a pan sensor device. The hotplate only emits heat when a pan with suitable measurements for the cooking zone is placed on it. If the indicator light is flashing, it may indicate:

•An incompatible pan

•A pan whose diameter is too small

•The pan has been removed from the hotplate.

Residual heat indicators

Each cooking zone is equipped with a residual heat

indicator. This indicator signals which cooking zones		GB
are still at a high temperature. If the power display

shows	, the cooking zone is still hot. It is possible,

for example, to keep a dish warm or melt butter or chocolate. As the cooking zone cools, the power

display will show . The display switches off when the cooking zone has cooled sufficiently.

Overheating protection

If the electronic elements overheat, the hob switches off automatically and F appears on the display,

followed by a flashing number. When the temperature has reached a suitable level, this message disappears and the hob may be used again.

Safety switch

The appliance has a safety switch which automatically switches the cooking zones off after they have been in operation for a certain amount of time at a particular power level. When the safety switch has been triggered, the display shows “0”.

For example: the right rear hotplate is set to 5 and will switch off after 5 hours of continuous operation, while the front left hotplate is set to 2 and will switch off after 8 hours.

	Power level	Maximum operating
	Power level	time in hours
		time in hours

	1	9

	2	8

	3	7

	4	6

	5	5

	6	4

	7	3

	8	2

	9	1

Buzzer

This can also indicate several irregularities:

•An object (a pan, cutlery, etc.) has been placed on the control panel for more than 10 seconds.

•Something has been spilt on the control panel.

•A button has been pressed for too long. All of the above situations may cause the buzzer to sound. Remove the cause of the malfunction to stop the buzzer. If the cause of the problem is not removed, the buzzer will keep sounding and the hob will switch off.

CIC 642 C specifications

The Hotpoint CIA 641 C S and CIC 642 C are modern built-in gas hobs that blend performance, modern aesthetics, and advanced cooking technologies, catering to the needs of contemporary kitchens. These hobs resonate with the essence of contemporary cooking, appealing to both amateur cooks and seasoned chefs.

The CIA 641 C S model boasts a sleek and stylish design, perfect for kitchens that prioritize both form and function. With four gas burners, including a powerful Wok burner, it allows users to manage multiple cooking tasks simultaneously. The innovative design ensures even heat distribution, enhancing cooking efficiency and flavor.

One of the standout features of the CIA 641 C S is its high-efficiency burners, engineered to provide faster boiling times and improved energy efficiency. These burners not only reduce cooking times but also allow for better control over cooking temperatures, making it easier to prepare a variety of dishes.

The CIC 642 C model takes it a step further, offering a slightly larger cooking surface. It comes with five burners, including a dual flame Wok burner that delivers intense heat for stir-frying or quick searing. The additional burner adds versatility to the kitchen, providing more options for meal preparation.

In terms of safety, both models are equipped with advanced flame failure devices. This technology automatically cuts off the gas supply if the flame goes out, providing peace of mind for users and ensuring a safer cooking environment. The easy-to-clean enamel pan supports are designed to simplify maintenance, making clean-up post-cooking quick and hassle-free.

Both hobs feature user-friendly rotary controls, allowing for precision cooking. The controls are designed for intuitive operation, meaning that adjustments to heat settings can be made quickly and effortlessly. This feature is particularly useful for recipes that require precise temperature control.

Incorporating a stylish stainless-steel finish, these hobs enhance the visual appeal of any kitchen, blending seamlessly with various design elements. The combination of sophisticated technology and aesthetic appeal makes the Hotpoint CIA 641 C S and CIC 642 C an excellent choice for anyone looking to upgrade their cooking experience while maintaining a modern kitchen design.