Using Your Toaster

❑Before use remove any stickers and wipe the body of your toaster with a damp cloth.

❑Ensure that before plugging the toaster into the outlet, the bread carriage lever is in the uppermost position.

❑Plug the cord in 120/127 volt, 60 HZ AC outlet. Position toaster at least 3 inches away from wall or rear of counter.

❑Let the first toasting process take place without inserting any bread to preheat the new elements and burn off any dust, which may have accumulated during storage.

❑Select the desired level of darkness by turning the “1-5” light/dark knob on the front panel of the toaster to the right for darker toast and to the left for lighter toast.

Your selection should vary based on the moisture content, thickness of bread, whether fresh or frozen and your darkness preference.

❑Next, place bread in slot and depress bread carriage lever downwards until it locks. Carriage lever will not stay down if toaster is not plugged in. The self-adjusting bread guides will automatically center the bread for even browning.

❑After the desired level of darkness has been reached, the bread will pop up automatically and is ready for removal from the slots. The bread carriage will return to its original position and disconnect the elements, ready for the next toasting.

❑To remove jammed toast, unplug toaster and remove bread once toaster has cooled down. Never insert fingers or metallic utensils into slots.

DO NOT WRAP THE CORD AROUND THE MAIN BODY OF

APPLIANCE DURING OR AFTER USE.