Care and Cleaning

Ceramic hob

Grill

Control Panel

Decorative Trims

Ovens

Oven Shelf

Supports

Oven Lamp Replacement

To reduce the amount of cleaning always ensure that the hob and cooking utensils are clean and dry before use. Regular use of cleaner conditioner is recommended for proper care and protection of the hob surface. Apply conditioner before using the hob for the first time. It contains a mild cleaning agent, so that subsequent applications may clean off soil and apply a protective film at the same time. For stubborn stains or heavy soiling use any of the following materials, and finish off with conditioner.

1.Cif, non-scratch scouring cream.

2.Liquid Gumption Kitchen Cleanser.

3.Special Powder Cleanser.

Powder Cleanser – Mineral deposits that are present in hard water, and some foods, may cause ‘discolourations’ that appear in the form of grey or brown stains. The stains sometimes appear to be in or under the glass surface. If there are some persistent stains after using any of the other recommended cleaning materials, powder cleanser may be applied, following the manufacturers instructions. Do not use abrasive cleaners or the powder cleanser on the painted metal framework. Cleaner Conditioner – Regular use of the conditioner will make the surface easier to clean thus ensuring that years of heavy abrasive cleaning do not progressively dull the surface.

Remove the grill pan and the wire grid food support, it is best to wash these items immediately after use to prevent stains from being burnt on when used again. Wipe out the Grill compartment, use a fine steel wool soap pad to remove stubborn stains from the grill runners and the floor of the compartment. Wipe over the control panel with a damp cloth and polish with a dry cloth.

Do not use cream cleaners, oven cleaners or aerosols, scouring pads or abrasive powder for cleaning the plastic knobs as damage will occur.

It is advisable to clean the decorative trims regularly to prevent any build up of soiling.The recommended method of cleaning is to wipe over the trims with a soft cloth wrung out in warm water or mild non-abrasive cleaner. (If in doubt try the cleaner on a small area of trim which is not noticeable in normal use). Then, after wiping with a cloth wrung out in clear water, dry with a soft clean cloth.

Remove the rod shelves and grill pan. Use a fine steel wool soap pad to remove stubborn stains from the rod shelves, grill pan and the floor of the oven. Clean the glass part of the oven door using a sponge and a non-abrasive cleaning product, then dry thoroughly with a soft cloth. Do not use rough abrasive material or sharp metal scrapers as these could scratch the surface and cause the glass to crack.

The shelf supports are removable and dishwasher safe.

To remove hold the support at the front and pull away from the oven side, this can then be cleaned in a sink or a dishwasher. When removed it allows access to the oven side, which can be cleaned with warm soapy water.

To refit the support, insert the longer leg into the rear fixing hole and push in the front leg.

Open the oven door and remove the rod shelves. Using a suitable cloth to protect the fingers grip the light glass dome, unscrew anti-clockwise and lift. Reach into the aperture with fingers, and unscrew the lamp anticlockwise. Fit replacement lamp (25W 300°C rated SES), refit dome.

WARNING:To avoid electric shocks - please ensure that the electricity supply to the appliance

is switched off and the appliance is fully cold, before removing the lamp lens.

EW48K, EW48X, EW48P, EW48G specifications

The Hotpoint EW48G, EW48P, EW48X, and EW48K are part of the renowned Hotpoint appliance line, known for their innovative features and reliable performance. These models cater to a range of cooking needs, providing versatility and efficiency for both novice and experienced cooks.

One of the standout features of the Hotpoint EW48 series is the multifunctional cooking system. Each model comes equipped with various cooking functions, including baking, grilling, and roasting, allowing users to prepare a wide array of dishes. With multiple cooking modes available, home cooks can seamlessly switch between different culinary techniques, maximizing the capabilities of their kitchen.

Additionally, the energy efficiency of these models sets them apart in the competitive appliance market. Hotpoint has designed the EW48 series to consume less energy while maintaining excellent cooking performance. This not only helps reduce electricity bills but also minimizes the environmental impact, making these appliances an eco-friendly choice for modern households.

The hot air circulation technology incorporated into the EW48 models ensures even cooking results. This system allows heat to circulate around the food, promoting consistent browning and preventing hot spots. As a result, dishes are cooked to perfection, whether it's a crispy roast chicken or a delicate soufflé.

User-friendly controls are another highlight of the Hotpoint EW48 series. With intuitive dials and easy-to-read displays, users can quickly set the desired cooking parameters. The models also include programmable timers, so you can set them to finish cooking, even when you're busy with other tasks.

Safety is a top priority in the design of the EW48 series. Each model comes with built-in safety features, including auto shut-off and a child lock option, providing peace of mind for families with young children. The models also feature easy-to-clean surfaces, making maintenance straightforward and hassle-free.

In conclusion, the Hotpoint EW48G, EW48P, EW48X, and EW48K represent a blend of advanced cooking technology, energy efficiency, and user-centric design. These appliances are ideal for anyone looking to elevate their culinary experience with reliable and versatile cooking solutions. With these models, Hotpoint continues its legacy of quality and innovation in the kitchen appliance industry.