Hotpoint DWF33, DWF35, DWF34, DWF30 installation instructions Washing Dishes

Page 19

FP105-01 DWF35/34/33/30 12/02/2002 10:23 am Page 19

Washing Dishes

Programme selection

The most appropriate programme can be identified by comparing the type of crockery, cutlery etc., as well as the amount and condition of food remains, with the details contained in the programme overview.

The corresponding programme sequence, duration and consumption details are shown in the bottom half of the overview.

For example:

Use the “Normal” programme for dishes and utensils which have plenty of food remains stuck on hard.

Reduce costs

If only a small number of dishes have been loaded into the dishwasher, selecting a programme that operates at the next lowest temperature will usually suffice.

Programme data

The stated programme data are based on standard operating conditions. The values can vary considerably according to:

-Different amounts of dishes

-Temperature of mains water supply.

-Pressure of mains water supply

-Ambient temperature

-Fluctuations in mains voltage.

-Machine-related factors (e.g. temperature, water volume,...)

Energy and water consumption is reduced by up to 1/4 when dishes are washed in the upper basket only.

Water consumption values are based on a water hardness setting of:

4 for Models DWF35 and DWF34

2 for Models DWF33 and DWF30

End of Programme.

-(Models DWF35 and DWF34 only) The programme has ended when a figure 0 appears in the numerical display 7 .

-(Models DWF33 and DWF30 only) The programme has come to an end when the Programme End indicator

10 light and the selected programme indicator are both illuminated.

Switching the dishwasher OFF

Several minutes after the programme has ended:

-Set the mains switch to OFF.

-Turn the water tap off.

-Remove dishes, etc. when they have cooled down.

Interrupting the programme.

-Set the mains switch to OFF.

-The indicator light will go out. The programme is retained in the dishwashers memory.

-If the hot water was switched ON or the appliance has already heated up and then the appliance door opened, leave the door ajar for several minutes and then close.

Otherwise, the appliance door may fly open due to expansion.

-In order to resume the stored programme, set the mains switch to ON again.

Note:

Plug-in delay timer cannot be used with Models DWF33 and DWF30.

Switching the dishwasher ON.

-Press the mains switch to ON. The indicator lights light up according to the last selected programme. The same programme will run again if no other programme button is pressed.

-(Models DWF35 and DWF34 only) The numerical display 7 shows the expected duration of the programme. The programme starts automatically.

-(Models DWF33 and DWF30 only)

The programme starts automatically.

19

Image 19
Contents Hotpoint Contents Fuses Electrical SupplyAdjusting the Feet InstallationChoose a Location Important Notes Connect to a Drainage SystemConnect to the Water Supply ChecklistDWF35 only Getting to Know your ApplianceDWF33 and DWF30 Fascia DWF35 / 34 onlyInterior Before Using your Appliance˚dH ˚fH ˚Clarke Mmol/l 65˚ 50˚ 35˚ Adjusting the Water SoftenerNormal QuickWater hardness table Models DWF35 and DWF34 only Before Using your Appliance... DWF35How the salt works While washing is Filling the Special Salt ContainerModels DWF33 and DWF30 only Filling the Rinse AID Container Adjusting the amount of Rinse AidFP105-01 DWF35/34/33/30 12/02/2002 1023 am Adding detergent Detergent compartment with level indicatorsWashing contents of Upper and Lower basket Washing contents of Upper basket only DWFWhat can I Wash Non Delicate Programme Overview... All ModelsCutlery Loading your DishwasherLoading the dishwasher Pots and Pans Cups and GlassesShelf Adjusting basket positionWashing Dishes Intensive drying function DWF35/34 Programming the timer DWF 35/34Time-remaining indicator DWF35/34 Cancel Programme ResetDishwasher salt Care and MaintenanceReassembly Overall condition of applianceTransporting the Dishwasher Protection from freezing temperaturesDisconnecting the Dishwasher Spray armsWith the appliance itself TroubleshootingResolving minor problems yourself Problems When the appliance is switched onWith the dishes, cutlery, etc Repair Service Hotpoint After Sales ServiceGuarantee Terms & Conditions Hotpoint GuaranteeFP105-01 DWF35/34/33/30 12/02/2002 1023 am Key Contacts

DWF33, DWF30, DWF34, DWF35 specifications

Hotpoint has established itself as a reliable brand in kitchen appliances, particularly with its series of dishwashers, including the DWF35, DWF34, DWF30, and DWF33 models. Each of these dishwashers is designed to cater to different household needs while maintaining an emphasis on performance, efficiency, and user-friendly features.

The Hotpoint DWF35 is renowned for its spacious interior, capable of accommodating up to 13 place settings, making it ideal for medium to large families. One of its standout features is the adjustable top basket, allowing users to customize the interior space based on the size of the dishes being washed. The DWF35 also boasts advanced wash programs, including an eco-friendly option that conserves water and energy while still delivering the outstanding cleaning results Hotpoint is known for.

The DWF34 model presents a similar capacity but differentiates itself with its A++ energy rating, ensuring reduced power consumption. It comes equipped with multiple washing programs and an intensive mode for heavily soiled items, providing versatility in cleaning. The Quiet Mark accredited operation of the DWF34 ensures that it runs smoothly without causing disruptions in the household, making it perfect for open-plan living spaces.

The DWF30 model embodies simplicity and efficiency, incorporating a dedicated rinse aid dispenser and a salt indicator to enhance performance. With a straightforward control panel, users can easily select their desired washing cycle, which caters to various levels of soil and load sizes. The DWF30 focuses on providing reliable performance at a competitive price, making it an excellent choice for budget-conscious consumers.

The Hotpoint DWF33 stands out for its innovative features, including the unique "Half Load" option, which allows users to run a shorter cycle for when the dishwasher is not fully loaded, promoting water conservation without compromising cleaning power. It also includes a delay start feature, enabling users to program the dishwasher to run at more convenient times or during off-peak energy hours.

Each of these models showcases Hotpoint's commitment to developing dishwashers that do not only clean dishes effectively but also prioritize energy efficiency and user convenience. With features like adjustable racks, various wash programs, and noise reduction technologies, consumers can find the perfect model to suit their lifestyle and kitchen needs. Whether you are looking for high capacity, energy efficiency, or budget-friendly options, Hotpoint's DWF series has something to offer for every home.