Hotpoint Essential Installation and Safety Tips for Your Dishwasher

Page 5

Installation

If the appliance must be moved at any time, keep it in an upright position; if absolutely necessary, it may be tilted onto its back.

Positioning and levelling

1.Remove the appliance from all packaging and check that it has not been damaged during transportation.

If it has been damaged, contact the retailer and do not proceed any further with the installation process.

2.Check the dishwasher by placing it so that its sides or back panel are in contact with the adjacent cabinets or even with

the wall. This appliance can also be recessed under a single worktop* (see the Assembly instruction sheet).

3.Position the dishwasher on a level and sturdy floor. If the floor is uneven, the front feet of the appliance may be adjusted until it reaches a horizontal position. If the appliance is levelled correctly, it will be more stable and much less likely to move or cause vibrations and noise while it is operating.

4*. Adjust the height of the rear foot from the front of the appliance on the central lower part of the dishwasher, turning a hexagonal spanner (red color) with an opening of 8 mm in a clockwise direction to increase the height or in an anticlockwise direction to decrease the height.

The dishwasher meets the requirements set out by the regulations in force concerning safety and electrical equipment.

Any technical checks should be conducted exclusively by a trained and authorised technician: Repairs carried out by unaithorised persons will invalidate the guarantee, as well as posing a potential hazard to the user.

The manufacturer declines all responsibility for damage to persons or property resulting from failure to observe the above precautions, from tampering with even a single component or from the use of non-original spare parts.

Electrical Connection

Before inserting the plug into the electrical socket, make sure that:

the socket is earthed and complies with current regulations;

the socket can withstand the maximum load of the appliance, which is indicated on the data plate located on the inside of the door (see Description of the appliance);

the power supply voltage falls within the values indicated on the data plate on the inside of the door;

the socket is compatible with the plug of the appliance. If this is not the case, ask an authorised technician to replace the plug (see After Sales Service); do not use extension cables or multiple sockets.

Once the appliance has been installed, the power supply cable and the electrical socket should be easily accessible.

The cable should not be bent or compressed.

GB

If the power supply cable is damaged, it must be replaced by the manufacturer or its Technical Assistance Service in order to prevent all potential hazards. (See After Sales Service)

This appliance must be earthed.

Fuses:your appliance comes fitted with a plug and a 13A fuse. If you need to replace the fuse, only those rated at 13A and ASTA approved to BS1362 should be used. If you lose the fuse cover, a replacement may be obtained from your local authorised Service Centre or Electrical company. Correct replacement is identified by colour coding or the marking on base of plug.

DO NOT use the plug unless the fuse cover is fitted.

Changing the Plug

Cut off and dispose of the supplied plug if it does not fit your socket.

To avoid a shock hazard DO NOT insert the discarded plug into a socket anywhere else.

Wires in the mains lead are coloured accordance with the following code:

Green/Yellow

-

Earth

Blue

-

Neutral

Brown

-

Live

If you change the plug, the colour of the wires in the mains lead may not correspond with the terminal markings in the plug, which if not coloured, could be:

EARTH ‘E’

or

 

 

 

NEUTRAL

‘N’

LIVE

‘L’

Changing the Mains Lead

A lead can be ordered from Hotpoint Service

UK: 08709 066 066 or

Republic of Ireland: 1850 302 220

-If you have damaged the existing lead or require a longer one a charge will be made. It is strongly advised that this work is carried out by a qualified electrician.

-If the domestic wiring includes a residual current-operated circuit breaker, ensure that it conforms to the latest regulations.

The dishwasher must not be connected to the electricity supply while installation is being carried out.

-This appliance should only be connected to a 230/240V AC source, via a properly installed earthed socket.

-Use the dishwasher solely in a domestic environment.

-DO NOT stand or place heavy objects on the door when it is open, this could damage the door or cause the appliance to tip forward.

5

Image 5
Contents Instructions for use ContentsProduct Fiche Product ficheGeneral safety Precautions and safety adviceDisposal of old electrical appliances Saving energy and respecting the environmentRecycling & Disposal Information Electrical Connection InstallationPositioning and levelling Connecting the water inlet hose Connecting the water suppliesSink Waste System Anti-condensation stripChild safety lock Switching the appliance on for the first timeDisplay Description of the applianceControl Panel Lower rack Loading the racksUpper rack TipsTip-up compartments* with adjustable position Adjusting the height of the upper rackCutlery tray Unsuitable crockeryMeasuring out the detergent Start-up and useStarting the dishwasher Wash cycle Wash cyclesWash options Special wash cycles and OptionsSetting the water hardness Rinse-aid dispenser settingRinse aid and refined salt Measuring out the rinse aidCare and maintenance Problem Possible causes / Solutions TroubleshootingAfter Sales Service After Sales ServiceParts and Accessories Essential Contact InformationMonths Parts and Labour Guarantee GuaranteeYear Parts Guarantee Extended GuaranteesPage 195108371.03
Related manuals
Manual 24 pages 47.07 Kb Manual 16 pages 82 b

FDUD 43133, ULTIMA specifications

The Hotpoint ULTIMA series is a line of innovative home appliances designed to enhance your kitchen experience with their advanced features and sleek design. Renowned for their reliability and performance, these appliances cater to a variety of cooking and food preservation needs, making them a popular choice for households looking for efficiency and convenience.

One of the standout features of the Hotpoint ULTIMA range is its unique Smart Technology. This includes sensors that monitor cooking parameters, adjusting heat and time automatically to ensure perfectly cooked meals every time. Whether you're baking, roasting, or grilling, the ULTIMA appliances offer precise control that saves you time and energy.

The ULTIMA line also boasts an impressive energy efficiency rating. With advancements in technology, these appliances consume less energy while delivering exceptional performance. This not only helps reduce your carbon footprint but also decreases your utility bills, making it an environmentally friendly choice for modern kitchens.

Another notable characteristic is the spacious interior designs that the ULTIMA ovens offer. With varying capacities, users can select models that best suit their household size. The roomy interiors allow for the cooking of large meals, making it perfect for families or those who love to host gatherings.

Moreover, the ULTIMA series features an easy-to-clean design. The interiors are often coated with self-cleaning enamel, which helps reduce food residue and grime buildup. Additionally, the removable components make it simple to maintain the appliance, ensuring it remains in optimal condition for years to come.

Hotpoint's commitment to user safety is evident in the ULTIMA appliances as well. Many models come equipped with safety features such as cool touch doors, child lock options, and automatic shut-off functions to prevent accidents during cooking.

Incorporating stylish aesthetics, the ULTIMA series is designed to complement any kitchen decor. With a variety of finishes available, including stainless steel and sleek black, these appliances not only perform well but also add a modern touch to your culinary space.

In summary, the Hotpoint ULTIMA series combines cutting-edge technology, energy efficiency, spacious designs, ease of cleaning, safety features, and appealing aesthetics, making it an ideal choice for those who cherish quality and performance in their kitchen appliances.