Start-up and use, Starting the dishwasher

Start-up and use

Starting the dishwasher

1.Turn the water tap on.

2.Open the door and press the ON/OFF button: you will hear a short beep and the display and option indicator lights switch on.

3.Measure out the detergent (see below).

4.Load the racks (see Loading the racks).

5.Select the wash cycle in accordance with the type of crockery and its soil level (see Table of wash cycles), by pressing the P button.

6.Select the wash options (see adjacent information).

7.Start the wash cycle by shutting the door: a long beep signals the start of the wash cycle.

8.Two short beeps and one long one indicate the end of the wash cycle and the wash cycle number flashes on the display. Open the door, switch off the appliance by pressing the ON/ OFF button, shut off the water tap and unplug the appliance from the electricity socket.

9.Wait for a few minutes before removing the crockery, in order to avoid burns. Unload the racks, beginning with the lower level.

The order in which the different wash cycles are displayed will change according to the frequency with which each cycle is used.

AUTO WASH CYCLES*: this model of dishwasher is equipped with a special sensor which can be used to assess the level of soiling and automatically select the most efficient and economic wash cycle accordingly.

The duration of the auto wash cycles may vary due to the operation of the sensor.

If the crockery is only lightly soiled or if it has been rinsed with water before being placed in the dishwasher, reduce the amount of detergent used accordingly.

Modifying a wash cycle in progress

If a mistake was made during the wash cycle selection process it is possible to change the cycle, provided that it has only just begun: open the door, avoiding the escaping steam, and press and hold the ON/OFF button; the machine will switch off with a long beep. Switch the machine back on using the ON/OFF button and select the new wash cycle and any options desired; start the cycle by closing the door.

Adding extra crockery

Without switching off the machine, open the door, taking care to avoid the escaping steam, and place the crockery inside the dishwasher. Close the door: the cycle starts from the point at which it was interrupted.

Accidental interruptions

If the door is opened during the wash cycle, or if there is a power cut, the cycle stops. It starts again from the point at which it was interrupted once the door has been shut or once the electricity supply is restored.

Measuring out the detergent

A good wash result also depends on the correct amount of detergent being used; exceeding the stated amount does not result in a more effective wash and increases environmental pollution.

Only use detergent which has been specifically designed for dishwashers.

DO NOT USE washing up liquid.

Using excessive detergent may result in foam residue remaining in the machine after the cycle has ended.

The use of tablets is only recommended for models which offer the MULTI-FUNCTIONAL TABLETS option.

To achieve the best results from each washing and drying cycle, powder detergent, rinse aid liquid and salt should be used.

Compartment A: Washing detergent

Compartment B: Pre-wash detergent

1. Open cover C by pressing button D.

2. Pour in the detergent after

consulting the Table of wash cycles:

• For powder detergent use compartments A and B.

• For detergent in tablet form: when the cycle requires 1 tablet, place it in compartment A and close the cover;

when it requires 2, place the second tablet at the bottom of the appliance.

3.Remove detergent residues from the edges of the compartment and close the cover until it clicks.

Wash options

If an option is not compatible with the selected was cycle (see Table of wash cycles), the corresponding LED flashes rapidly 3 times and 2 short beeps will sound.

Delayed start

It is possible to delay the start time of the cycle by 3, 6 or 9 hours.

1.Press the DELAYED START button: every time it is pressed a buzzer sounds and the selected period of time is displayed.

2.Select the wash cycle and shut the door: after the beep sounds, the timer begins counting down.

3.Once this time has elapsed, the indicator light switches off and the wash cycle begins.

To adjust the delay time and select a smaller period of time, press the DELAYED START button. To cancel it, press the button repeatedly until the selected delayed start indicator light switches off. The wash cycle will start automatically as soon as the door is shut.

*Only available in selected models.

LFT 321 specifications

The Hotpoint LFT 321 is a fully integrated dishwasher designed to deliver exceptional performance while enhancing the modern kitchen's aesthetics. This appliance combines advanced technology with user-friendly features, ensuring an efficient dishwashing experience.

One of the standout features of the Hotpoint LFT 321 is its energy efficiency. It operates with an excellent energy rating, making it an environmentally friendly option that helps reduce electricity bills. The dishwasher utilizes Hotpoint's innovative Eco cycle, which adjusts water and energy consumption according to the load size, optimizing resource use without compromising cleaning efficiency.

The LFT 321 is equipped with a range of wash programs tailored to meet various cleaning needs. With multiple settings, users can choose from options like Intensive, Normal, and Quick wash cycles. The Intensive mode is perfect for heavily soiled dishes, while the Quick wash setting is ideal for lightly soiled items, providing a thorough clean in a short period. Additionally, the Half Load option allows users to effectively wash smaller loads without waiting for a full dishwasher, promoting flexibility and convenience.

Another notable feature of the Hotpoint LFT 321 is its adjustable upper basket, which provides extra space for taller items. This feature showcases the appliance's thoughtful design, making it easier to fit various dish sizes and shapes. The machine also boasts a spacious capacity, accommodating up to 14 place settings, making it an excellent choice for families and households that frequently entertain guests.

The Hotpoint LFT 321 prioritizes user convenience with its intuitive controls and digital display. The interface is easy to navigate, allowing users to select the desired program with minimal effort. Moreover, the dishwasher operates at a quiet noise level, ensuring a peaceful kitchen environment even during cycles.

For added peace of mind, the dishwasher features a delay timer, allowing users to pre-set wash cycles to start at a time that suits their schedule. This is particularly useful for those who prefer to take advantage of off-peak electricity rates.

In summary, the Hotpoint LFT 321 is a versatile and efficient dishwasher that combines practical features with advanced technology. With its energy-efficient operation, numerous wash programs, customizable capacity, and user-friendly design, it stands out as a reliable option for modern households looking to streamline their dishwashing routine.