Hotpoint SDW80, SDW85 manual Levelling, Standpipe SinkWasteSystem, Drain hose connection

Page 6
Ensure the drain hose is securely attached, to prevent it coming away while the machine is in use and causing a flood.

Installation

Choose where you want to install your dishwasher, you can place it so that its sides or back panel are side by side with furniture or up against the wall. The dishwasher is providedwithwatersupplyanddrain hoses, which can be directed towards the left or right to facilitate appropriateinstallation.

Levelling.

Once the appliance is positioned, adjust the feet by screwing them in or out depending on how high you want it and to level it so that it is horizontal. Make sure that it is not inclined more than 2 degrees. If the applianceislevel,itwill helpensure its correct operation.

Cold water connection. Connect the cold water supply hose, and making sure that it is fastened tightly in place. If the water hoses are new or have been outofuseforanextendedperiodof time, let the water run to make sure it is clear and free of impurities beforemakingtheconnection.Ifthis precaution is not taken, the water inlet could get blocked, causing damage to your dishwasher.

Connect to the Water Supply...

Standpipe:

SinkWasteSystem:

- For your dishwasher to operate

Ensure that the hose is not pushed

For under sink drainage:

correctlyitrequireswaterpressures

too far down the standpipe.

Before connecting the drain hose,

in the range of 6-150 psi (100-

If the end of your drain hose is fitted

remove any internal restrictions -

1000KPa).Mostcoldwatersupplies

with‘retainingflaps’,ensuretheyare

This will prevent a build up of debris

willbeinthisrange.NOTE:lowwater

insertedfullyintothestandpipe. This

which could cause a blockage.

pressure will lead to excessively

will prevent the pipe from jumping

Remove any restrictions from the

long fill times or no fill.

out during installation and use.

waste spigot and ensure that the

-Ensurethatthenewhosesupplied

 

sealingbungisremoved.Thehose

is connected and the old hose is

 

should be routed, such that it is

disposed of safely.

 

raised to a minimum height of

- Ensure the fill hose is only fitted to

 

800mm(31/2”).

the cold water supply. DO NOT

 

 

overtighten the hose connector,

 

 

hand tight is sufficient.

 

 

- Ensure the fill hose is not kinked.

 

 

- Tap connections (if applicable): A

DO NOT position the standpipe

 

range of adaptors are available to

near an electrical outlet.

 

suit your tap.

ENSURE that the drain hose is not

 

- DO NOT connect the dishwasher

kinked and it is routed as shown in

 

toasingleoutletinstantaneouswater

thediagram.

NOTE: Ensure the sink outlet

heater or an electric heater.

 

 

pipe has a minimum diamtere of

 

The standpipe should have a bore

 

32mm.

Drain hose connection.

of at least 38mm (11/2”). It should

 

WARNING: Connect your

be installed as shown, have a trap

 

dishwasher drain hose to pipes

fitted and must discharge into the

 

which connect to the foul drain

same drain system as your

 

system and not to surface water

household sink.

 

drains.

 

 

IMPORTANT: For the correct

It MUST NOT be connected to a

1. Untie the end of the GREY

operation of your dishwasher, it is

surface water drain.

drainage hose from the rear of the

essential to comply with the

 

 

appliance.

following information:

 

 

2. Reposition the ‘Hooked End

 

 

 

 

Support’ as required along the

 

 

GREY drainage hose.

 

 

3. If fitting an under sink waste

 

 

disposal unit, cut out the

 

 

membrane, bung or blanking plug.

Remember you will be charges for a service call is a problem with your appliance is caused by incorrect installation or misuse.

6

Page 5 Page 7
Image 6
Page 5 Page 7
Contents Instructions for Installation and Use Ishwasher Contents Electrical Connection For your Safety Do not drink any water residues from inside the dishwasherLevelling Standpipe SinkWasteSystemDrain hose connection 600 Before Using your Dishwasher Screw the cap back in place carefully To the + settingWhen to add salt Filling the salt containerLoading your Dishwasher Getting to know your Dishwasher Controls97/17/CE Labelling How to use your Dishwasher Programme Chart ‘Aquasensor’ wash cyclesTurnoffthewatersupply Disconnect drain and water inlet hose Care and CleaningFor cleaning, use a non metallic brush TimeTroubleshooting Resolving minor problems yourselfLoading the detergent Loading the Rinse AidRepair Service and Information Help Desk Genuine Parts and AccessoriesUK 08709 077Extended Warranties Satisfaction guaranteed or your money back Guarantee terms and conditionsIshwasher 195046444.02 Repair Service and Information DeskGenuine Parts and Accessories November

SDW85, SDW80 specifications

The Hotpoint SDW80 and SDW85 are two prominent models in the realm of freestanding dishwashers, designed to deliver superior cleaning performance along with user-friendly features. Both models are highly regarded for their efficiency and reliability, making them excellent choices for modern kitchens.

One of the key features of the Hotpoint SDW80 is its flexible loading capacity, featuring a spacious interior that can accommodate various dish sizes and styles. The adjustable top basket allows users to customize the space according to their needs, making it easier to fit larger pots and pans. For added convenience, the foldable racks and tines enhance the dishwasher's versatility, ensuring that every load is optimally cleaned.

The SDW85 model takes it a step further with advanced cleaning technology, incorporating the brand's innovative ActiveCare function. This technology adapts the washing cycle to the degree of soil on the dishes, ensuring that even heavily soiled items emerge sparkling clean. The inclusion of a dedicated intensive wash program specifically targets stubborn stains and baked-on food, providing exceptional results every time.

Energy efficiency is a significant characteristic of both models. With an A+ energy rating, these dishwashers are designed to consume minimal water and electricity while delivering maximum performance. The Eco wash program further enhances their energy-saving capabilities, allowing for the washing of lightly soiled dishes at lower temperatures, thereby reducing overall energy consumption.

Another notable feature is the Ultra Silent operation. Both the SDW80 and SDW85 are engineered to minimize operational noise, allowing for quiet dishwashing, even during the night. This is particularly beneficial for households where noise can be a concern.

Additionally, the Hotpoint SDW80 and SDW85 come equipped with multiple wash programs and temperature settings, enabling users to choose the best cycle for their specific needs. From quick washes for lightly soiled dishes to more intensive cycles for tougher jobs, these models provide versatility for various cleaning requirements.

In terms of design, both dishwashers boast a sleek and modern aesthetic, complementing a range of kitchen styles. Their intuitive control panels and LED indicators make operating these appliances straightforward, ensuring ease of use for everyone in the household.

In summary, the Hotpoint SDW80 and SDW85 offer a compelling combination of flexible loading options, energy efficiency, and innovative cleaning technologies. These features, along with their quiet operation and user-friendly designs, make them standout choices for anyone in need of an effective and reliable dishwasher.
Top Page Image Contents