Electrical Connection

The dishwasher meets the requirements set out by the regulations in force concerning safety and electrical equipment.

Any technical checks should be conducted exclusively by a trained and authorised technician: Repairs carried out by unaithorised persons will invalidate the guarantee, as well as posing a potential hazard to the user.

The manufacturer declines all responsibility for damage to persons or property resulting from failure to observe the above precautions, from tampering with even a single component or from the use of non-original spare parts.

Before inserting the plug into the electrical socket, make sure that:

•the socket is earthed and complies with current regulations;

•the socket can withstand the maximum load of the appliance, which is indicated on the data plate located on the inside of the door (see Description of the appliance);

•the power supply voltage falls within the values indicated on the data plate on the inside of the door;

•the socket is compatible with the plug of the appliance. If this is not the case, ask an authorised technician to replace the plug (see Assistance); do not use extension cables or multiple sockets.

Once the appliance has been installed, the power supply cable and the electrical socket should be easily accessible.

The cable should not be bent or compressed.

If the power supply cable is damaged, it must be replaced by the manufacturer or its Technical Assistance Service in order to prevent all potential hazards. (See Assistance)

This appliance must be earthed

Fuses:your appliance comes fitted with a plug and a 13A fuse. If you need to replace the fuse, only those rated at 13A and ASTA approved to BS1362 should be used. If you lose the fuse cover, a replacement may be obtained from your local authorised Service Centre or Electrical company. Correct replacement is identified by colour coding or the marking on base of plug.

DO NOT use the plug unless the fuse cover is fitted.

Changing the Plug

Cut off and dispose of the supplied plug if it does not fit your socket.

To avoid a shock hazard DO NOT insert the discarded plug into a socket anywhere else.

Wires in the mains lead are coloured accordance with the following code:

Green/Yellow	-	Earth
Blue	-	Neutral
Brown	-	Live

If you change the plug, the colour of the wires in the mains lead may not correspond with the terminal markings in the plug, which if not coloured, could be:

EARTH ‘E’ or

NEUTRAL ‘N’

LIVE ‘L’

Changing the Mains Lead

A lead can be ordered from Hotpoint Service

UK: 08709 066 066 or

Republic of Ireland: 1850 302 220

-If you have damaged the existing lead or require a longer one a charge will be made. It is strongly advised that this work is carried out by a qualified electrician.

-If the domestic wiring includes a residual current- operated circuit breaker, ensure that it conforms to the latest regulations.

The dishwasher must not be connected to the electricity supply while installation is being carried out.

-This appliance should only be connected to a 230/ 240V AC source, via a properly installed earthed socket.

-Use the dishwasher solely in a domestic environment.

-DO NOT stand or place heavy objects on the door when it is open, this could damage the door or cause the appliance to tip forward.

The Company shall not be held responsible for any incidents that occur if these regulations are not observed.

lft 3214 specifications

The Hotpoint LFT 3214 is a sleek and efficient dishwasher designed to fit seamlessly into modern kitchens. This model is particularly popular among households looking for a reliable appliance to tackle the demands of everyday dishwashing. Its smart design and advanced features make it a valuable addition to any home.

One of the standout features of the Hotpoint LFT 3214 is its energy efficiency. It boasts an impressive A+ energy rating, helping users to minimize energy consumption while enjoying sparkling clean dishes. This is enhanced by the Rapid Clean program, which allows for expedited washing, cutting down on time without sacrificing cleaning performance.

The LFT 3214 is equipped with multiple wash programs to cater to different types of loads and levels of dirtiness. The Intensive cycle ensures that heavily soiled pots and pans receive the deep cleaning they require, while the Eco program is designed for lightly soiled items, optimizing water and energy usage. Additionally, the Half Load option offers flexibility for smaller loads, allowing users to wash only what is necessary.

In terms of capacity, the Hotpoint LFT 3214 can accommodate up to 14 place settings, making it perfect for larger families or those who frequently entertain. The adjustable upper rack provides added convenience, allowing users to customize the interior space to fit taller items like pots or large glasses.

The dishwasher also features advanced technologies, such as the Active Dry system, which utilizes the steam generated during the wash cycle to efficiently dry dishes, reducing the need for towel drying. This not only enhances drying performance but also contributes to better hygiene, as utensils and plates are dried without any contact.

The design of the LFT 3214 is both functional and stylish, with a stainless-steel finish that complements any kitchen décor. The intuitive control panel is user-friendly, allowing for easy selection of various programs and settings.

Overall, the Hotpoint LFT 3214 combines reliability, efficiency, and a range of features that meet the demands of modern family life. Whether it's the time-saving Rapid Clean program, the impressive capacity, or the energy-efficient washing technology, this dishwasher stands out as a top choice for those seeking a hassle-free dishwashing experience.