Connecting the water supplies

Connection to the water and electricity supplies should only be performed by a qualified technician.

The dishwasher should not stand on top of the water hoses or the electricity supply cable.

Connecting the water inlet hose

The water inlet and outlet hoses and the electricity supply cable may be positioned towards the right or the left in order to achieve the best possible installation.

•To a suitable cold water connection point: before attaching the hose, run the water until it is perfectly clear so that any impurities that may be present in the water do not clog the appliance; after performing this operation, screw the inlet hose tightly onto a tap with a ¾ gas threaded connection.

•To a suitable hot water connection point: your dishwasher may be provided with hot water from the mains supply (if you have a central heating system with radiators) provided that it does not exceed a temperature of 60°C.

Screw the hose to the tap as described for connection to a cold water supply.

If the inlet hose is not long enough, contact a specialist store or an authorised technician (see Assistance).

The water pressure must be within the values indicated in the Technical data table (see Installation).

The hose should not be bent or compressed.

The appliance must be connected to the water supply network using new hoses.

Do not use old hoses.

Ensure that the new hose supplied is connected and the old hose is disposed of safely.

DO NOT overtighten the hose connector, hand tight is sufficient.

Ensure the fill hose is not kinked.

Tap connections*: A range of adaptors are available to suit your tap.

DO NOT connect the dishwasher to a single outlet instantaneous water heater or an electric heater.

Sink Waste System

Connect the outlet hose (without bending it) to a drain duct with a minimum diameter of 32 mm.

The outlet hose must be at a height ranging from 40 to 80 cm (from 15’’ to 31’’) from the floor / surface where the dishwasher rests (A).

•before connecting the drain hose, remove any internal restrictions; this will prevent a build up of debris which could cause a blockage

•remove any restrictions from the waste spigot and ensure that the sealing bung is removed (B).

It MUST NOT be connected to a surface water drain.

•Untie the end of the GREY drainage hose from the rear of the appliance.

•If fitting an under sink waste disposal unit, cut out the membrane, bung or blanking plug.

Ensure the drain hose is securely attached, to prevent it coming away while the machine is in use and causing a flood.

Fit hose to waste securely using a “Jubilee” type clip.

*Only available in selected models.

SDUD 1200 specifications

The Hotpoint SDUD 1200 is a highly efficient under-counter dishwasher that combines functionality, reliability, and sleek design. It is perfect for those seeking to save space in their kitchen without compromising on cleanliness and performance. This model showcases a range of features and technologies that make it an exceptional choice for modern households.

One of the standout features of the Hotpoint SDUD 1200 is its energy efficiency. With an impressive energy rating, it helps reduce utility bills while being environmentally friendly. The dishwasher operates quietly, making it an ideal option for homes where noise is a concern.

The SDUD 1200 boasts an impressive capacity, capable of accommodating up to 10 place settings, which is a significant benefit for families and those who enjoy entertaining guests. Its flexible interior design includes adjustable racks and a cutlery basket, allowing users to arrange items efficiently for optimal cleaning.

Equipped with various wash programs, including Eco, Rapid, and Intensive cycles, the Hotpoint SDUD 1200 caters to different cleaning needs and soil levels. The Eco mode is particularly beneficial for reducing water consumption, ensuring that users can maintain cleanliness while being conscious of resource usage.

The dishwasher features advanced technologies like the Active Dry system, which enhances drying performance. This system ensures that dishes come out completely dry and free of water spots, even after intensive cycles. Additionally, the Anti-Flood device provides peace of mind by detecting leaks and preventing water overflow, ensuring safety and longevity of the appliance.

Another notable characteristic is the control panel, which is user-friendly and includes a digital display for easy navigation through the settings. The delay timer feature allows users to set the wash to begin at their convenience, making it easier to integrate dishwashing into a busy schedule.

Overall, the Hotpoint SDUD 1200 is a prime choice for anyone in need of a powerful, efficient, and stylish under-counter dishwasher. With its blend of advanced technology, flexible loading options, and high energy efficiency, this model stands out in the competitive market of kitchen appliances. Whether for everyday use or special occasions, it delivers consistent performance that meets the demands of contemporary life.