Connecting the water supplies, Sink Waste System

Connecting the water supplies

Connection to the water and electricity supplies should only be performed by a qualified technician.

The dishwasher should not stand on top of the water hoses or the electricity supply cable.

Connecting the water inlet hose

The water inlet and outlet hoses and the electricity supply cable may be positioned towards the right or the left in order to achieve the best possible installation.

•To a suitable cold water connection point: before attaching the hose, run the water until it is perfectly clear so that any impurities that may be present in the water do not clog the appliance; after performing this operation, screw the inlet hose tightly onto a tap with a ¾ gas threaded connection.

•To a suitable hot water connection point: your dishwasher may be provided with hot water from the mains supply (if you have a central heating system with radiators) provided that it does not exceed a temperature of 60°C.

Screw the hose to the tap as described for connection to a cold water supply.

If the inlet hose is not long enough, contact a specialist store or an authorised technician (see After Sales Service).

The water pressure must be within the values indicated in the Technical data table (see Installation).

The hose should not be bent or compressed.

The appliance must be connected to the water supply network using new hoses.

Do not use old hoses.

Ensure that the new hose supplied is connected and the old hose is disposed of safely.

DO NOT overtighten the hose connector, hand tight is sufficient.

Ensure the fill hose is not kinked.

Tap connections*: A range of adaptors are available to suit your tap.

DO NOT connect the dishwasher to a single outlet instantaneous water heater or an electric heater.

Sink Waste System

Connect the outlet hose (without bending it) to a drain duct with a minimum diameter of 32 mm.

The outlet hose must be at a height ranging from 40 to 80 cm (from 15’’ to 31’’) from the floor / surface where the dishwasher rests (A).

•before connecting the drain hose, remove any internal restrictions; this will prevent a build up of debris which could cause a blockage

•remove any restrictions from the waste spigot and ensure that the sealing bung is removed (B).

It MUST NOT be connected to a surface water drain.

•Untie the end of the GREY drainage hose from the rear of the appliance.

•If fitting an under sink waste disposal unit, cut out the membrane, bung or blanking plug.

Ensure the drain hose is securely attached, to prevent it coming away while the machine is in use and causing a flood.

Fit hose to waste securely using a “Jubilee” type clip.

*Only available in selected models.

LFT 228 specifications

The Hotpoint LFT 228 is a built-in dishwasher that stands out in the realm of kitchen appliances with its innovative features, reliable performance, and sleek design. This model is particularly designed for households seeking efficiency and convenience without sacrificing style.

One of the most prominent features of the Hotpoint LFT 228 is its impressive capacity. With a place setting for up to 14 meals, it caters to large families and those who often entertain guests. The adjustable shelves and folding plate racks further enhance its versatility, allowing users to customize the interior space to accommodate larger pots and pans with ease.

In terms of energy efficiency, the LFT 228 boasts an A+ rating, indicating an environmentally friendly design that helps in reducing energy consumption while still delivering exceptional cleaning power. This model is equipped with several wash programs tailored to different needs, including Intensive, Eco, and Rapid cycles. The Eco option is particularly popular for those looking to save on water and energy while effectively cleaning everyday dishes.

The dishwasher also features Hotpoint’s innovative technology, including the "Intensive Zone," which focuses on tougher stains in the lower basket while lightly cleaning delicate items above. This ensures that every dish, regardless of size or degree of soiling, comes out spotless. Additionally, the "Half Load" function allows users to run the dishwasher with either the upper or lower basket, further enhancing energy savings.

Noise levels are another crucial consideration when choosing home appliances. The Hotpoint LFT 228 operates at a low decibel level, making it among the quieter dishwashers on the market. This ensures a peaceful kitchen environment, even during operation.

The user-friendly interface of the dishwasher is also noteworthy, featuring a clear LED display that simplifies operation and allows users to choose settings with ease. The delay start function is an added convenience, enabling users to program the dishwasher to run at a time that suits their schedule.

Overall, the Hotpoint LFT 228 is a well-rounded dishwasher that combines modern technology with practical design. Its various features, energy efficiency, and user-friendly interface make it a compelling choice for any household looking to enhance their kitchen experience with reliable and effective dishwashing solutions.