Hotpoint FDYF 11011 Connecting the water supplies, Sink Waste System, Anti-condensation strip

Page 6

GB

 

 

The Company shall not be held responsible for any

 

 

incidents that occur if these regulations are not observed.

 

Anti-condensation strip*

After installing the dishwasher, open the door and stick the adhesive transparent strip under the wooden shelf in order to protect it from any condensation which may form.

Technical data

Dimensions

width 60 cm

height 85 cm

 

 

 

depth 60 cm

Capacity

13 standard place-settings

Water supply

0,05 ÷ 1MPa (0.5 ÷ 10 bar)

pressure

7,25 – 145 psi

Power supply voltage

See appliance data plate

 

 

 

 

Total absorbed power

See appliance data plate

 

 

 

 

Fuse

See appliance data plate

 

 

 

This dishwasher conforms to the

 

 

 

following European Community

 

 

 

Directives:

 

 

 

-2006/95/EC (Low Voltage)

 

 

 

-2004/108/EC (Electromagnetic

 

 

 

Compatibility)

 

 

 

-2009/125/EC (Comm. Reg.

 

 

 

1016/2010) (Ecodesign)

 

 

 

-97/17/EC (Labelling)

 

 

 

-2012/19/EU Waste Electrical

 

 

 

and Electronic Equipment

 

 

 

(WEEE)

 

 

 

Connecting the water supplies

Connection to the water and electricity supplies should only be performed by a qualified technician.

The dishwasher should not stand on top of the water hoses or the electricity supply cable.

Connecting the water inlet hose

The water inlet and outlet hoses and the electricity supply cable may be positioned towards the right or the left in order to achieve the best possible installation.

•To a suitable cold water connection point: before attaching the hose, run the water until it is perfectly clear so that any impurities that may be present in the water do not clog the appliance; after performing this operation, screw the inlet hose tightly onto a tap with a ¾ gas threaded connection.

•To a suitable hot water connection point: your dishwasher may be provided with hot water from the mains supply (if you have a central heating system with radiators) provided that it does not exceed a temperature of 60°C.

Screw the hose to the tap as described for connection to a cold water supply.

If the inlet hose is not long enough, contact a specialist store or an authorised technician (see Assistance).

The water pressure must be within the values indicated in the Technical data table (see Installation).

The hose should not be bent or compressed.

The appliance must be connected to the water supply network using new hoses.

Do not use old hoses.

Ensure that the new hose supplied is connected and the old hose is disposed of safely.

DO NOT overtighten the hose connector, hand tight is sufficient.

Ensure the fill hose is not kinked.

Tap connections*: A range of adaptors are available to suit your tap.

DO NOT connect the dishwasher to a single outlet instantaneous water heater or an electric heater.

Sink Waste System

Connect the outlet hose (without bending it) to a drain duct with a minimum diameter of 32 mm.

The outlet hose must be at a height ranging from 40 to 80 cm (from 15’’ to 31’’) from the floor/surface where the dishwasher rests (A).

•before connecting the drain hose, remove any internal restrictions; this will prevent a build up of debris which could cause a blockage

•remove any restrictions from the waste spigot and ensure that the sealing bung is removed (B).

It MUST NOT be connected to a surface water drain.

•Untie the end of the GREY drainage hose from the rear of the appliance.

•If fitting an under sink waste disposal unit, cut out the membrane, bung or blanking plug.

*Only available in selected models.

6

Page 5 Page 7
Image 6
Page 5 Page 7
Contents Instructions for use Fdyf 11011 StyleProduct Fiche HotpointDisposal of old electrical appliances Precautions and safety adviceGeneral safety Saving energy and respecting the environmentRecycling & Disposal Information Installation Positioning and levellingElectrical Connection Sink Waste System Connecting the water suppliesConnecting the water inlet hose Anti-condensation stripAdvice regarding the first wash cycle Anti-flooding protectionDescription of the appliance Control panelDisplay Cutlery basket Loading the racksLower rack Upper rackCutlery tray Tip-up compartments with adjustable positionAdjusting the height of the upper rack Unsuitable crockeryStart-up and use Starting the dishwasherMeasuring out the detergent Wash cycles Wash CycleSpecial wash cycles and Options Wash optionsRinse aid and refined salt Rinse-aid dispenser settingSetting the water hardness Measuring out the rinse aidCare and maintenance Troubleshooting Problem Possible causes / SolutionsParts and Accessories After Sales ServiceAfter Sales Service Essential Contact InformationYear Parts Guarantee GuaranteeMonths Parts and Labour Guarantee Extended GuaranteesPage 195113124.02

FDYF 11011 specifications

The Hotpoint FDYF 11011 is a modern and efficient freestanding dishwasher designed to meet the demands of busy households. Combining functionality with user-friendly features, this dishwasher stands out for its performance and practicality.

One of the main features of the FDYF 11011 is its generous capacity. With the ability to accommodate up to 13 place settings, it’s perfect for families or those who frequently entertain guests. The adjustable racking system allows users to customize the interior space according to the size and type of dishes being washed, ensuring optimal space utilization.

Equipped with various wash programs, the FDYF 11011 provides flexibility to handle different cleaning needs. These programs include intensive, normal, eco, and glass, allowing users to select the most appropriate cycle for their dishes. The eco mode is particularly noteworthy, as it is designed to save water and energy, making it an environmentally friendly option for energy-conscious users.

The dishwasher features advanced technologies that enhance its performance. The Active Dry technology ensures that dishes are dried effectively, eliminating the need for manual towel-drying. This is not only convenient but also helps to prevent water spots on glassware. Additionally, the dishwasher operates quietly, thanks to its low noise level, making it suitable for open-plan living spaces.

Another remarkable characteristic of the Hotpoint FDYF 11011 is its easy-to-use control panel. The interface is designed for simplicity, allowing users to easily navigate through the wash programs and settings. An LED display provides clear information regarding the selected cycle and remaining time, keeping users informed throughout the wash process.

Safety is also a priority with the FDYF 11011. It includes features such as a child lock, preventing small hands from accidentally changing settings. Moreover, the appliance is fitted with a water stop system which detects leaks and prevents flooding, providing peace of mind.

In conclusion, the Hotpoint FDYF 11011 is a versatile, efficient, and user-friendly dishwasher ideal for modern kitchens. Its array of features, including ample capacity, multiple wash programs, effective drying technology, and safety measures make it a reliable choice for those looking to streamline their dishwashing experience.
Top Page Image Contents