Hotpoint FDFET 33121 manual Installation, Positioning and levelling, Electrical Connection

Page 5

Installation

If the appliance must be moved at any time, keep it in an upright position; if absolutely necessary, it may be tilted onto its back.

Positioning and levelling

1.Remove the appliance from all packaging and check that it has not been damaged during transportation.

If it has been damaged, contact the retailer and do not proceed any further with the installation process.

2.Check the dishwasher by placing it so that its sides or back panel are in contact with the adjacent cabinets or even with

the wall. This appliance can also be recessed under a single worktop* (see the Assembly instruction sheet).

3.Position the dishwasher on a level and sturdy floor. If the floor is uneven, the front feet of the appliance may be adjusted until it reaches a horizontal position. If the appliance is levelled correctly, it will be more stable and much less likely to move or cause vibrations and noise while it is operating.

4*. Adjust the height of the rear foot from the front of the appliance on the central lower part of the dishwasher, turning a hexagonal spanner (red color) with an opening of 8 mm in a clockwise direction to increase the height or in an anticlockwise direction to decrease the height.

The dishwasher meets the requirements set out by the regulations in force concerning safety and electrical equipment.

Any technical checks should be conducted exclusively by a trained and authorised technician: Repairs carried out by unaithorised persons will invalidate the guarantee, as well as posing a potential hazard to the user.

The manufacturer declines all responsibility for damage to persons or property resulting from failure to observe the above precautions, from tampering with even a single component or from the use of non-original spare parts.

Electrical Connection

Before inserting the plug into the electrical socket, make sure that:

the socket is earthed and complies with current regulations;

the socket can withstand the maximum load of the appliance, which is indicated on the data plate located on the inside of the door (see Description of the appliance);

the power supply voltage falls within the values indicated on the data plate on the inside of the door;

the socket is compatible with the plug of the appliance. If this is not the case, ask an authorised technician to replace the plug (see After Sales Service); do not use extension cables or multiple sockets.

Once the appliance has been installed, the power supply cable and the electrical socket should be easily accessible.

The cable should not be bent or compressed.

GB

If the power supply cable is damaged, it must be replaced by the manufacturer or its Technical Assistance Service in order to prevent all potential hazards. (See After Sales Service)

This appliance must be earthed.

Fuses:your appliance comes fitted with a plug and a 13A fuse. If you need to replace the fuse, only those rated at 13A and ASTA approved to BS1362 should be used. If you lose the fuse cover, a replacement may be obtained from your local authorised Service Centre or Electrical company. Correct replacement is identified by colour coding or the marking on base of plug.

DO NOT use the plug unless the fuse cover is fitted.

Changing the Plug

Cut off and dispose of the supplied plug if it does not fit your socket.

To avoid a shock hazard DO NOT insert the discarded plug into a socket anywhere else.

Wires in the mains lead are coloured accordance with the following code:

Green/Yellow

-

Earth

Blue

-

Neutral

Brown

-

Live

If you change the plug, the colour of the wires in the mains lead may not correspond with the terminal markings in the plug, which if not coloured, could be:

EARTH ‘E’

or

 

 

 

NEUTRAL

‘N’

LIVE

‘L’

Changing the Mains Lead

A lead can be ordered from Hotpoint Service

UK: 08709 066 066 or

Republic of Ireland: 1850 302 220

-If you have damaged the existing lead or require a longer one a charge will be made. It is strongly advised that this work is carried out by a qualified electrician.

-If the domestic wiring includes a residual current-operated circuit breaker, ensure that it conforms to the latest regulations.

The dishwasher must not be connected to the electricity supply while installation is being carried out.

-This appliance should only be connected to a 230/240V AC source, via a properly installed earthed socket.

-Use the dishwasher solely in a domestic environment.

-DO NOT stand or place heavy objects on the door when it is open, this could damage the door or cause the appliance to tip forward.

5

Image 5
Contents Fdfet 33121 Experience Instructions for useHotpoint Product FicheGeneral safety Precautions and safety adviceDisposal of old electrical appliances Saving energy and respecting the environmentContaining enzymes Recycling & Disposal InformationPhosphate-free and chlorine-free detergents Electrical Connection InstallationPositioning and levelling Connecting the water inlet hose Connecting the water suppliesSink Waste System Anti-condensation stripAnti-flooding protection Advice regarding the first wash cycleDisplay Description of the applianceControl Panel Lower rack Loading the racksCutlery basket Upper rackAdjusting the height of the upper rack Tip-up compartments with adjustable positionCutlery tray Unsuitable crockeryMeasuring out the detergent Start-up and useStarting the dishwasher Wash cycle Wash cyclesWash options Special wash cycles and OptionsSetting the water hardness Rinse-aid dispenser settingRinse aid and refined salt Measuring out the rinse aidCare and maintenance Problem Possible causes / Solutions TroubleshootingAfter Sales Service After Sales ServiceParts and Accessories Essential Contact InformationMonths Parts and Labour Guarantee GuaranteeYear Parts Guarantee Extended GuaranteesPage 195118384.00

FDFET 33121 specifications

The Hotpoint FDFET 33121 is an innovative dishwasher designed to combine convenience, efficiency, and performance. This appliance stands out in the market due to its user-friendly features and advanced technologies that cater to the modern household. With a sleek and modern design, it seamlessly fits into any kitchen decor while providing optimal dishwashing capabilities.

One of the standout features of the FDFET 33121 is its large capacity, which allows users to wash up to 14 place settings in a single cycle. This spacious interior is ideal for families or those who frequently entertain guests, minimizing the need for multiple loads and saving valuable time. The adjustable racks and foldable tines create flexibility for accommodating various types of dishware, from large pots to delicate glassware.

The FDFET 33121 is equipped with Hotpoint's innovative ActiveDry technology, which ensures that dishes come out not only clean but also dry. This technology utilizes a unique drying process that enhances air circulation, resulting in a more efficient drying performance without the need for added heat, making it more energy-efficient.

In terms of energy consumption, the FDFET 33121 boasts an excellent energy rating, making it an environmentally friendly choice for households. The Eco Wash program is designed to reduce water and electricity consumption, allowing users to be more conscious of their environmental impact while enjoying the convenience of a dishwasher.

Furthermore, the dishwasher features a range of wash programs tailored to different types of loads. From intensive cycles specifically for heavily soiled pots and pans to delicate cycles for fragile items, users can choose the optimal setting for their needs. The Quick Wash option is particularly appealing for those who are short on time, providing a fast and efficient wash in just 30 minutes.

Noise levels are also a consideration with the FDFET 33121, as it operates at a low decibel level, ensuring a quiet experience even during nighttime operation.

Lastly, the user interface is straightforward, with easy-to-read controls that allow for quick selection of programs and options. The digital display offers clear feedback on the cycle status, further enhancing the user experience.

In conclusion, the Hotpoint FDFET 33121 is a versatile, efficient, and feature-rich dishwasher that meets the needs of contemporary households, blending performance and style seamlessly.